No description for this product yet.

• HTD pulleys have a different design from the traditional toothed pulleys. The axial grooves are designed to allow the beltteeth to catch the pulley teeth with negligible triction. HTD Pulleys are available with full hub and for assembly with SER-SIT taper bushing.
•  
• Product detail 
• Type of belt : 8 M 
• Pitch :  8 mm
• Pitch diameter : 181.97 mm
• Outside diameter + flange : 191 mm
• Teeth : 72
• Type of bush : 3020
• Belt width : 85 mm
• Type of pulley :2
• Material : Cast iron
• Flange : With flanges 

• HTD pulleys have a different design from the traditional toothed pulleys. The axial grooves are designed to allow the beltteeth to catch the pulley teeth with negligible triction. HTD Pulleys are available with full hub and for assembly with SER-SIT taper bushing.
•  
• Product detail 
• Type of belt : 14 M 
• Pitch :  14 mm
• Pitch diameter : 353.71 mm
• Outside diameter + flange : -
• Teeth : 80
• Type of bush : 3535
• Belt width : 115 mm
• Type of pulley :14
• Material : Cast iron
• Flange : Without flanges 

• HTD pulleys have a different design from the traditional toothed pulleys. The axial grooves are designed to allow the beltteeth to catch the pulley teeth with negligible triction. HTD Pulleys are available with full hub and for assembly with SER-SIT taper bushing.
•  
• Product detail 
• Type of belt : 14 M 
• Pitch :  14 mm
• Pitch diameter : 353.71 mm
• Outside diameter + flange : -
• Teeth : 80
• Type of bush : 4040
• Belt width : 170 mm
• Type of pulley :7
• Material : Cast iron
• Flange : Without flanges 

• HTD pulleys have a different design from the traditional toothed pulleys. The axial grooves are designed to allow the beltteeth to catch the pulley teeth with negligible triction. HTD Pulleys are available with full hub and for assembly with SER-SIT taper bushing.
•  
• Product detail 
• Type of belt : 14 M 
• Pitch :  14 mm
• Pitch diameter : 353.71 mm
• Outside diameter + flange : -
• Teeth : 80
• Type of bush : 3020
• Belt width : 40 mm
• Type of pulley :14
• Material : Cast iron
• Flange : Without flanges 

• HTD pulleys have a different design from the traditional toothed pulleys. The axial grooves are designed to allow the beltteeth to catch the pulley teeth with negligible triction. HTD Pulleys are available with full hub and for assembly with SER-SIT taper bushing.
•  
• Product detail 
• Type of belt : 14 M 
• Pitch :  14 mm
• Pitch diameter : 353.71 mm
• Outside diameter + flange : -
• Teeth : 80
• Type of bush : 3020 
• Belt width : 55 mm
• Type of pulley :14
• Material : Cast iron
• Flange : Without flanges 

• HTD pulleys have a different design from the traditional toothed pulleys. The axial grooves are designed to allow the beltteeth to catch the pulley teeth with negligible triction. HTD Pulleys are available with full hub and for assembly with SER-SIT taper bushing.
•  
• Product detail 
• Type of belt : 14 M 
• Pitch :  14 mm
• Pitch diameter : 353.71 mm
• Outside diameter + flange : -
• Teeth : 80
• Type of bush : 3535
• Belt width : 85 mm
• Type of pulley :14
• Material : Cast iron
• Flange : Without flanges 

• HTD pulleys have a different design from the traditional toothed pulleys. The axial grooves are designed to allow the beltteeth to catch the pulley teeth with negligible triction. HTD Pulleys are available with full hub and for assembly with SER-SIT taper bushing.
•  
• Product detail 
• Type of belt : 5 M 
• Pitch :  5 mm
• Pitch diameter : 126.18 mm
• Outside diameter + flange : 131 mm
• Teeth : 80
• Type of bush : 1610
• Belt width : 15 mm
• Type of pulley :1
• Material : Cast iron
• Flange : With flanges 

• HTD pulleys have a different design from the traditional toothed pulleys. The axial grooves are designed to allow the beltteeth to catch the pulley teeth with negligible triction. HTD Pulleys are available with full hub and for assembly with SER-SIT taper bushing.
•  
• Product detail 
• Type of belt : 8 M 
• Pitch :  8 mm
• Pitch diameter : 202.35 mm
• Outside diameter + flange : -
• Teeth : 80
• Type of bush : 2012
• Belt width : 20 mm
• Type of pulley : 9 
• Material : Cast iron
• Flange : Without flanges 

• HTD pulleys have a different design from the traditional toothed pulleys. The axial grooves are designed to allow the beltteeth to catch the pulley teeth with negligible triction. HTD Pulleys are available with full hub and for assembly with SER-SIT taper bushing.
•  
• Product detail 
• Type of belt : 8 M 
• Pitch :  8 mm
• Pitch diameter : 202.35 mm
• Outside diameter + flange : -
• Teeth : 80
• Type of bush : 2517
• Belt width : 30 mm
• Type of pulley : 6 
• Material : Cast iron
• Flange : Without flanges 

No description for this product yet.

• HTD pulleys have a different design from the traditional toothed pulleys. The axial grooves are designed to allow the beltteeth to catch the pulley teeth with negligible triction. HTD Pulleys are available with full hub and for assembly with SER-SIT taper bushing.
•  
• Product detail 
• Type of belt : 8 M 
• Pitch :  8 mm
• Pitch diameter : 202.35 mm
• Outside diameter + flange : -
• Teeth : 80
• Type of bush : 3020
• Belt width : 50 mm
• Type of pulley : 7 
• Material : Cast iron
• Flange : Without flanges 

• HTD pulleys have a different design from the traditional toothed pulleys. The axial grooves are designed to allow the beltteeth to catch the pulley teeth with negligible triction. HTD Pulleys are available with full hub and for assembly with SER-SIT taper bushing.
•  
• Product detail 
• Type of belt : 8 M 
• Pitch :  8 mm
• Pitch diameter : 202.35 mm
• Outside diameter + flange : -
• Teeth : 80
• Type of bush : 3020
• Belt width : 85 mm
• Type of pulley : 7
• Material : Cast iron
• Flange : Without flanges 

• HTD pulleys have a different design from the traditional toothed pulleys. The axial grooves are designed to allow the beltteeth to catch the pulley teeth with negligible triction. HTD Pulleys are available with full hub and for assembly with SER-SIT taper bushing.
•  
• Product detail 
• Type of belt : 14 M 
• Pitch :  `14 mm
• Pitch diameter : 398.28 mm
• Outside diameter + flange : -
• Teeth : 90
• Type of bush : 3535
• Belt width : 115 mm
• Type of pulley : 14
• Material : Cast iron
• Flange : Without flanges 

• HTD pulleys have a different design from the traditional toothed pulleys. The axial grooves are designed to allow the beltteeth to catch the pulley teeth with negligible triction. HTD Pulleys are available with full hub and for assembly with SER-SIT taper bushing.
•  
• Product detail 
• Type of belt : 14 M 
• Pitch :  `14 mm
• Pitch diameter : 398.28 mm
• Outside diameter + flange : -
• Teeth : 90
• Type of bush : 4040 
• Belt width : 170 mm
• Type of pulley : 14
• Material : Cast iron
• Flange : Without flanges 

• HTD pulleys have a different design from the traditional toothed pulleys. The axial grooves are designed to allow the beltteeth to catch the pulley teeth with negligible triction. HTD Pulleys are available with full hub and for assembly with SER-SIT taper bushing.
•  
• Product detail 
• Type of belt : 14 M 
• Pitch :  `14 mm
• Pitch diameter : 398.28 mm
• Outside diameter + flange : -
• Teeth : 90
• Type of bush : 3020
• Belt width : 40 mm
• Type of pulley : 14
• Material : Cast iron
• Flange : Without flanges 

• HTD pulleys have a different design from the traditional toothed pulleys. The axial grooves are designed to allow the beltteeth to catch the pulley teeth with negligible triction. HTD Pulleys are available with full hub and for assembly with SER-SIT taper bushing.
•  
• Product detail 
• Type of belt : 14 M 
• Pitch :  `14 mm
• Pitch diameter : 398.28 mm
• Outside diameter + flange : -
• Teeth : 90
• Type of bush : 3020
• Belt width : 55 mm
• Type of pulley : 14
• Material : Cast iron
• Flange : Without flanges 

• HTD pulleys have a different design from the traditional toothed pulleys. The axial grooves are designed to allow the beltteeth to catch the pulley teeth with negligible triction. HTD Pulleys are available with full hub and for assembly with SER-SIT taper bushing.
•  
• Product detail 
• Type of belt : 14 M 
• Pitch :  `14 mm
• Pitch diameter : 398.28 mm
• Outside diameter + flange : -
• Teeth : 90
• Type of bush : 3535
• Belt width : 85 mm
• Type of pulley : 14
• Material : Cast iron
• Flange : Without flanges 

HTD pulleys have a different design from the traditional toothed pulleys. The axial grooves are designed to allow the beltteeth to catch the pulley teeth with negligible triction. HTD Pulleys are available with full hub and for assembly with taper bushing.

• HTD pulleys have a different design from the traditional toothed pulleys. The axial grooves are designed to allow the beltteeth to catch the pulley teeth with negligible triction. HTD Pulleys are available with full hub and for assembly with SER-SIT taper bushing.
•  
• Product detail 
• Type of belt : 5 M 
• Pitch :  `5 mm
• Pitch diameter : 142.10 mm
• Outside diameter + flange : -
• Teeth : 90
• Type of bush : 1610
• Belt width : 15 mm
• Type of pulley : 15
• Material : Cast iron
• Flange : Without flanges 

No description for this product yet.

• HTD pulleys have a different design from the traditional toothed pulleys. The axial grooves are designed to allow the beltteeth to catch the pulley teeth with negligible triction. HTD Pulleys are available with full hub and for assembly with SER-SIT taper bushing.
•  
• Product detail 
• Type of belt : 8 M 
• Pitch :  8 mm
• Pitch diameter : 227.81 mm
• Outside diameter + flange : -
• Teeth : 90
• Type of bush : 2012
• Belt width : 20 mm
• Type of pulley : 12
• Material : Cast iron
• Flange : Without flanges 

• HTD pulleys have a different design from the traditional toothed pulleys. The axial grooves are designed to allow the beltteeth to catch the pulley teeth with negligible triction. HTD Pulleys are available with full hub and for assembly with SER-SIT taper bushing.
•  
• Product detail 
• Type of belt : 8 M 
• Pitch :  8 mm
• Pitch diameter : 227.81 mm
• Outside diameter + flange : -
• Teeth : 90
• Type of bush : 2517
• Belt width : 30 mm
• Type of pulley : 12
• Material : Cast iron
• Flange : Without flanges 

• HTD pulleys have a different design from the traditional toothed pulleys. The axial grooves are designed to allow the beltteeth to catch the pulley teeth with negligible triction. HTD Pulleys are available with full hub and for assembly with SER-SIT taper bushing.
•  
• Product detail 
• Type of belt : 8 M 
• Pitch :  8 mm
• Pitch diameter : 227.81 mm
• Outside diameter + flange : -
• Teeth : 90
• Type of bush : 3020
• Belt width : 50 mm
• Type of pulley : 7
• Material : Cast iron
• Flange : Without flanges