SIT-LOCK 14 are shrink discs for external, series "14", are characterised by a single tapered ring instead of opposite tapers of the 3 pieces shrink discs SIT-LOCK series "11". The SIT-LOCK 14 Shrink discs offer a better concentricity and centering and very good balancing. These features make the series highly suitable for mid-high speed applications.
SIT-LOCK 14 are manufactured in five different types :
- 14-21 for mid torque transmission
- 14-22 for high torque transmission
- 14-81 for very high torque transmission
- 14-23 eqivalent in size to the type 14-22 but able to transmit an extra 20-30% of torque
- 14-83 eqivalent in size to the type 14-81 but able to transmit an extra 20-30% of torque
SIT-LOCK® locking assembly unit consists of four pieces with two inside double-one rings joined through a set of tightening screws. It is recomended for medium torques. Although it is not self centering, it can be easily assembled and diassembled.
Here are the dimensions of product :
Inner Diameter : refer to numbers writen after "F" in every product name. For example, CAL1F20/47; so, the inner diameter is 20 mm.
Outside Diameter : refer to the last number in every product name. For example, CAL1F20/47; so, the outside diameter is 47 mm.
SIT-LOCK 14 are shrink discs for external, series "14", are characterised by a single tapered ring instead of opposite tapers of the 3 pieces shrink discs SIT-LOCK series "11". The SIT-LOCK 14 Shrink discs offer a better concentricity and centering and very good balancing. These features make the series highly suitable for mid-high speed applications.
SIT-LOCK 14 are manufactured in five different types :
- 14-21 for mid torque transmission
- 14-22 for high torque transmission
- 14-81 for very high torque transmission
- 14-23 eqivalent in size to the type 14-22 but able to transmit an extra 20-30% of torque
- 14-83 eqivalent in size to the type 14-81 but able to transmit an extra 20-30% of torque
SIT-LOCK® locking assembly unit consists of four pieces with two inside double-one rings joined through a set of tightening screws. It is recomended for medium torques. Although it is not self centering, it can be easily assembled and diassembled.
Here are the dimensions of product :
Inner Diameter : refer to numbers writen after "F" in every product name. For example, CAL1F20/47; so, the inner diameter is 20 mm.
Outside Diameter : refer to the last number in every product name. For example, CAL1F20/47; so, the outside diameter is 47 mm.
SIT-LOCK 14 are shrink discs for external, series "14", are characterised by a single tapered ring instead of opposite tapers of the 3 pieces shrink discs SIT-LOCK series "11". The SIT-LOCK 14 Shrink discs offer a better concentricity and centering and very good balancing. These features make the series highly suitable for mid-high speed applications.
SIT-LOCK 14 are manufactured in five different types :
- 14-21 for mid torque transmission
- 14-22 for high torque transmission
- 14-81 for very high torque transmission
- 14-23 eqivalent in size to the type 14-22 but able to transmit an extra 20-30% of torque
- 14-83 eqivalent in size to the type 14-81 but able to transmit an extra 20-30% of torque
POWERLOCK locking assembly unit consists of four pieces with two inside double-one rings joined through a set of tightening screws. It is recomended for medium torques. Although it is not self centering, it can be easily assembled and diassembled.
POWERLOCK locking assembly unit consists of four pieces with two inside double-one rings joined through a set of tightening screws. It is recomended for medium torques. Although it is not self centering, it can be easily assembled and diassembled.
Shrink discs are external locking devices which are installed over hub projections. By locking the screws, radial pressures act on the hub allowing an effective and solid connection.
Recommended for medium and high torque. For SIT-LOCK® is also available in "SPLIT" and "HALF" for special applications.
For the dimension of the product, please download the catalog in the document section
POWERLOCK locking assembly unit consists of four pieces with two inside double-one rings joined through a set of tightening screws. It is recomended for medium torques. Although it is not self centering, it can be easily assembled and diassembled.
Locking assembly with single taper design. Consists of two tapered rings and a spacer. It has minimum overall dimensions in virtue of the reduced thickness of the cones.
SIT-LOCK® 3 is suitable for the applications where small hubs are requested. It is recommended for mid-high torques and is self centering.
For the dimension of the product, please download the catalog in the document section
Locking assembly with single taper design. Consists of two tapered rings and a spacer. It has minimum overall dimensions in virtue of the reduced thickness of the cones.
SIT-LOCK® 3 is suitable for the applications where small hubs are requested. It is recommended for mid-high torques and is self centering.
For the dimension of the product, please download the catalog in the document section
SIT-LOCK® locking assembly unit consists of four pieces with two inside double-one rings joined through a set of tightening screws. It is recomended for medium torques. Although it is not self centering, it can be easily assembled and diassembled.
POWERLOCK locking assembly unit consists of four pieces with two inside double-one rings joined through a set of tightening screws. It is recomended for medium torques. Although it is not self centering, it can be easily assembled and diassembled.