All Products 20223
Call us
.png)
SIT
PBT Pulleys - for mounting taper bushing SER-SIT
Material: cast iron DIN 1691 GG-20/GG25
Finishing: protective surface treatment.
V-groove pulleys suitable for use with the following belts:
-SPZ-Z-3V
-SPA-A
-SPB-B-5V
-SPC-C
[Please login to see price]
Ask Quote
Call us
.png)
SIT
PBT Pulleys - for mounting taper bushing SER-SIT
Material: cast iron DIN 1691 GG-20/GG25
Finishing: protective surface treatment.
V-groove pulleys suitable for use with the following belts:
-SPZ-Z-3V
-SPA-A
-SPB-B-5V
-SPC-C
[Please login to see price]
Ask Quote
Call us
SIT
PBT Pulleys - for mounting taper bushing SER-SIT
Material: cast iron DIN 1691 GG-20/GG25
Finishing: protective surface treatment.
V-groove pulleys suitable for use with the following belts:
-SPZ-Z-3V
-SPA-A
-SPB-B-5V
-SPC-C
[Please login to see price]
Ask Quote
Call us
SIT
- SITEX® gear couplings consist of two toothed hubs which are connected with one internally toothed sleeve. The hubs are made of steel and the teeth, which are both profiled and section crowned, are obtained from milling. The sleeve is manufactured from stabilized 6.6 superpolymade resin.
- Here are the dimensions of product :
- Outside diameter of sleeve : : 40 mm
- Outside diameter of the hub : 24.5 mm
- Total length : 50 mm
- Length of sleeve : 37 mm
[Please login to see price]
Ask Quote
Call us
SIT
- SITEX® gear couplings consist of two toothed hubs which are connected with one internally toothed sleeve. The hubs are made of steel and the teeth, which are both profiled and section crowned, are obtained from milling. The sleeve is manufactured from stabilized 6.6 superpolymade resin.
- Here are the dimensions of product :
- Outside diameter of sleeve : : 100 mm
- Outside diameter of the hub : 68 mm
- Total length : 104 mm
- Length of sleeve : 50 mm
[Please login to see price]
Ask Quote
Call us
SIT
- SITEX® gear couplings consist of two toothed hubs which are connected with one internally toothed sleeve. The hubs are made of steel and the teeth, which are both profiled and section crowned, are obtained from milling. The sleeve is manufactured from stabilized 6.6 superpolymade resin.
- Here are the dimensions of product :
- Outside diameter of sleeve : : 48 mm
- Outside diameter of the hub : 30 mm
- Total length : 54 mm
- Length of sleeve : 37 mm
[Please login to see price]
Ask Quote
Call us
SIT
- SITEX® gear couplings consist of two toothed hubs which are connected with one internally toothed sleeve. The hubs are made of steel and the teeth, which are both profiled and section crowned, are obtained from milling. The sleeve is manufactured from stabilized 6.6 superpolymade resin.
- Here are the dimensions of product :
- Outside diameter of sleeve : : 52 mm
- Outside diameter of the hub : 35 mm
- Total length : 56 mm
- Length of sleeve : 41 mm
[Please login to see price]
Ask Quote
Call us
SIT
- SITEX® gear couplings consist of two toothed hubs which are connected with one internally toothed sleeve. The hubs are made of steel and the teeth, which are both profiled and section crowned, are obtained from milling. The sleeve is manufactured from stabilized 6.6 superpolymade resin.
- Here are the dimensions of product :
- Outside diameter of sleeve : : 66 mm
- Outside diameter of the hub : 43 mm
- Total length : 84 mm
- Length of sleeve : 47mm
[Please login to see price]
Ask Quote
Call us
SIT
- SITEX® gear couplings consist of two toothed hubs which are connected with one internally toothed sleeve. The hubs are made of steel and the teeth, which are both profiled and section crowned, are obtained from milling. The sleeve is manufactured from stabilized 6.6 superpolymade resin.
- Here are the dimensions of product :
- Outside diameter of sleeve : : 142 mm
- Outside diameter of the hub : 96 mm
- Total length : 144 mm
- Length of sleeve : 73 mm
[Please login to see price]
Ask Quote
Call us
SIT
- SITEX® gear couplings consist of two toothed hubs which are connected with one internally toothed sleeve. The hubs are made of steel and the teeth, which are both profiled and section crowned, are obtained from milling. The sleeve is manufactured from stabilized 6.6 superpolymade resin.
- Here are the dimensions of product :
- Outside diameter of sleeve : : 76mm
- Outside diameter of the hub : 50mm
- Total length : 84mm
- Length of sleeve : 48mm
[Please login to see price]
Ask Quote
Call us
SIT
- SITEX® gear couplings consist of two toothed hubs which are connected with one internally toothed sleeve. The hubs are made of steel and the teeth, which are both profiled and section crowned, are obtained from milling. The sleeve is manufactured from stabilized 6.6 superpolymade resin.
- Here are the dimensions of product :
- Outside diameter of sleeve : : 83 mm
- Outside diameter of the hub : 58mm
- Total length : 84mm
- Length of sleeve : 48mm
[Please login to see price]
Ask Quote
Call us
SIT
- SITEX® gear couplings consist of two toothed hubs which are connected with one internally toothed sleeve. The hubs are made of steel and the teeth, which are both profiled and section crowned, are obtained from milling. The sleeve is manufactured from stabilized 6.6 superpolymade resin.
- Here are the dimensions of product :
- Outside diameter of sleeve : : 92mm
- Outside diameter of the hub : 65mm
- Total length : 88mm
- Length of sleeve : 51mm
[Please login to see price]
Ask Quote
Call us
SIT
SITEX gear couplings of two toothed hubs which are connected with one internally toothed sleeve. The hubs are made of steel and teeth, which are both profiled and section crowned, are milled. The sleeve is manufactured from stabilized 6.6 superpolymade resin.
[Please login to see price]
Ask Quote
Call us
SIT
STANDART PULLEYS
These pulleys have equally spared grooves machined into the outside diameter, to give correct meshing with the bell teeth.
The pulley grooves are of a special design to give this correct meshing of the belt teeth with minimal friction. all pulleys manufactured have correct minimum meshing tolerancer built in. The pitch diameter is always larger than the outside diameter. The pulleys are normally stocked in a wide range of various diameter (no. of teeth) and standart widths.
These pulleys have equally spared grooves machined into the outside diameter, to give correct meshing with the bell teeth.
The pulley grooves are of a special design to give this correct meshing of the belt teeth with minimal friction. all pulleys manufactured have correct minimum meshing tolerancer built in. The pitch diameter is always larger than the outside diameter. The pulleys are normally stocked in a wide range of various diameter (no. of teeth) and standart widths.
[Please login to see price]
Ask Quote
Call us
SIT
STANDART PULLEYS
These pulleys have equally spared grooves machined into the outside diameter, to give correct meshing with the bell teeth.
The pulley grooves are of a special design to give this correct meshing of the belt teeth with minimal friction. all pulleys manufactured have correct minimum meshing tolerancer built in. The pitch diameter is always larger than the outside diameter. The pulleys are normally stocked in a wide range of various diameter (no. of teeth) and standart widths.
These pulleys have equally spared grooves machined into the outside diameter, to give correct meshing with the bell teeth.
The pulley grooves are of a special design to give this correct meshing of the belt teeth with minimal friction. all pulleys manufactured have correct minimum meshing tolerancer built in. The pitch diameter is always larger than the outside diameter. The pulleys are normally stocked in a wide range of various diameter (no. of teeth) and standart widths.
[Please login to see price]
Ask Quote
Call us
SIT
STANDART PULLEYS
These pulleys have equally spared grooves machined into the outside diameter, to give correct meshing with the bell teeth.
The pulley grooves are of a special design to give this correct meshing of the belt teeth with minimal friction. all pulleys manufactured have correct minimum meshing tolerancer built in. The pitch diameter is always larger than the outside diameter. The pulleys are normally stocked in a wide range of various diameter (no. of teeth) and standart widths.
These pulleys have equally spared grooves machined into the outside diameter, to give correct meshing with the bell teeth.
The pulley grooves are of a special design to give this correct meshing of the belt teeth with minimal friction. all pulleys manufactured have correct minimum meshing tolerancer built in. The pitch diameter is always larger than the outside diameter. The pulleys are normally stocked in a wide range of various diameter (no. of teeth) and standart widths.
[Please login to see price]
Ask Quote
Call us
SIT
STANDART PULLEYS
These pulleys have equally spared grooves machined into the outside diameter, to give correct meshing with the bell teeth.
The pulley grooves are of a special design to give this correct meshing of the belt teeth with minimal friction. all pulleys manufactured have correct minimum meshing tolerancer built in. The pitch diameter is always larger than the outside diameter. The pulleys are normally stocked in a wide range of various diameter (no. of teeth) and standart widths.
These pulleys have equally spared grooves machined into the outside diameter, to give correct meshing with the bell teeth.
The pulley grooves are of a special design to give this correct meshing of the belt teeth with minimal friction. all pulleys manufactured have correct minimum meshing tolerancer built in. The pitch diameter is always larger than the outside diameter. The pulleys are normally stocked in a wide range of various diameter (no. of teeth) and standart widths.
[Please login to see price]
Ask Quote
Call us
.jpg)
SIT
STANDART PULLEYS
These pulleys have equally spared grooves machined into the outside diameter, to give correct meshing with the bell teeth.
The pulley grooves are of a special design to give this correct meshing of the belt teeth with minimal friction. all pulleys manufactured have correct minimum meshing tolerancer built in. The pitch diameter is always larger than the outside diameter. The pulleys are normally stocked in a wide range of various diameter (no. of teeth) and standart widths.
These pulleys have equally spared grooves machined into the outside diameter, to give correct meshing with the bell teeth.
The pulley grooves are of a special design to give this correct meshing of the belt teeth with minimal friction. all pulleys manufactured have correct minimum meshing tolerancer built in. The pitch diameter is always larger than the outside diameter. The pulleys are normally stocked in a wide range of various diameter (no. of teeth) and standart widths.
[Please login to see price]
Ask Quote
Call us
.png)
SIT
- TRASCO flexible couplings is the flexible and omocinetic coupling that assures the best performance in relation to the physical space occupied in its class. It has a very compact design and allows safe power transmision by absorbing peak loads and torsional vibrations.
- Product detail
- Outside diameter : 40 mm
- Max bore : 24 mm
- Material : Aluminum
- Color of spider : Red
- Shore of spider : 98 Sh.A
- Compound of spider : Polyurethane
- Admissible Temperature [°C] of spider : the rang is between -30 and +90°C
- Approved according to EC standard ATEX 94/9/EC.
[Please login to see price]
Ask Quote
Call us
.png)
SIT
- TRASCO flexible couplings is the flexible and omocinetic coupling that assures the best performance in relation to the physical space occupied in its class. It has a very compact design and allows safe power transmision by absorbing peak loads and torsional vibrations.
- Product detail
- Outside diameter : 40 mm
- Max bore : 24 mm
- Material : Aluminum
- Color of spider : Yellow
- Shore of spider : 92 Sh.A
- Compound of spider : Polyurethane
- Admissible Temperature [°C] of spider : the rang is between -40 and +90°C
- Approved according to EC standard ATEX 94/9/EC.
[Please login to see price]
Ask Quote
Call us
SIT
- TRASCO flexible couplings is the flexible and omocinetic coupling that assures the best performance in relation to the physical space occupied in its class. It has a very compact design and allows safe power transmision by absorbing peak loads and torsional vibrations.
- Product detail
- Outside diameter : 55 mm
- Max bore : 24 mm
- Material : Aluminum
- Color of spider : Red
- Shore of spider : 98 Sh.A
- Compound of spider : Polyurethane
- Admissible Temperature [°C] of spider : the rang is between -30 and +90°C
- Approved according to EC standard ATEX 94/9/EC.
[Please login to see price]
Ask Quote
Call us
.png)
SIT
- TRASCO flexible couplings is the flexible and omocinetic coupling that assures the best performance in relation to the physical space occupied in its class. It has a very compact design and allows safe power transmision by absorbing peak loads and torsional vibrations.
- Product detail
- Outside diameter : 55 mm
- Max bore : 32 mm
- Material : Aluminum
- Color of spider : Yellow
- Shore of spider : 92 Sh.A
- Compound of spider : Polyurethane
- Admissible Temperature [°C] of spider : the rang is between -40 and +90°C
- Approved according to EC standard ATEX 94/9/EC.
[Please login to see price]
Ask Quote
Call us
SIT
- TRASCO flexible couplings is the flexible and omocinetic coupling that assures the best performance in relation to the physical space occupied in its class. It has a very compact design and allows safe power transmision by absorbing peak loads and torsional vibrations.
- Product detail
- Outside diameter : 55 mm
- Max bore : 32 mm
- Material : Aluminum
- Color of spider : Red
- Shore of spider : 98 Sh.A
- Compound of spider : Polyurethane
- Admissible Temperature [°C] of spider : the rang is between -30 and +90°C
- Approved according to EC standard ATEX 94/9/EC.
[Please login to see price]
Ask Quote
Call us
SIT
- TRASCO flexible couplings is the flexible and omocinetic coupling that assures the best performance in relation to the physical space occupied in its class. It has a very compact design and allows safe power transmision by absorbing peak loads and torsional vibrations.
- Product detail
- Outside diameter : 55 mm
- Max bore : 32 mm
- Material : Aluminum
- Color of spider : Yellow
- Shore of spider : 92 Sh.A
- Compound of spider : Polyurethane
- Admissible Temperature [°C] of spider : the rang is between -40 and +90°C
- Approved according to EC standard ATEX 94/9/EC.
[Please login to see price]
Ask Quote
