• JUBOFLEX® couplings has exceptional elastic properties, in fact it allows for : 
•  
• - An excellent dampening effect of the load peaks;
• - High safety factor and a very high resistance to alternating deformation, thanks to pre-compression;
• possibility of bearing misaligment values rarely possible with other couplings. 
•  
• Here are the dimensions of product :
• Outside diameter : 91 mm 
• Width : 28 mm 

• JUBOFLEX® couplings are made of :
•  
• - One elastic element made of pre-compressed, natural rubber, reinforced with steel to be fitted with fixing screws and a metallic band.
• - Two metallic hubs made of forged steel.
•  
• JUBOFLEX® couplings has exceptional elastic properties, in fact it allows for : 
•  
• - An excellent dampening effect of the load peaks;
• - High safety factor and a very high resistance to alternating deformation, thanks to pre-compression;
• possibility of bearing misaligment values rarely possible with other couplings. 
•  
• Here are the dimensions of product :
• Max bore : 30 mm 
• Full outside diamteter : 91 mm 
• Hub outside diameter : 42 mm 
• Length : 128 mm 

• JUBOFLEX® elastic coupling for mounting SERSIT® taper bushing, consist of : 
•  
• - One elastic element made of pre-compressed, natural rubber, reinforced with steel to be fitted with fixing screws and a metallic band.
• - Two metallic hubs made of forged steel.
• - Two SER-SIT® taper bush from size 4 to 25;
•  
• Here are the dimensions of product :
• Type of taper bushing : 1108 (28.20)
• Diameter of the bore : 9 - 22 mm 
• Full outside diamteter : 91 mm 
• Hub outside diameter : 48 mm 
• Length : 74 mm 

• METALDRIVE® couplings are fully made of steel and are used in all applications where high reliablity, precision, and no maintenance are required.
•  
• METALDRIVE® GMD typw "S" are standard version with single disc pack. The couplings allows axial and angular misalignment. No radial misalignment is allowed. 
•  
• Here are the dimension of the product :
• Outside diameter : 80 mm 
• Inner diameter : 32 mm 
• Length : 88 mm 
• Screw : 6 
• Type of screw : M5

• METALDRIVE® couplings are fully made of steel and are used in all applications where high reliablity, precision, and no maintenance are required.
•  
• METALDRIVE® GMD typw "S" are standard version with single disc pack. The couplings allows axial and angular misalignment. No radial misalignment is allowed. 
•  
• Here are the dimension of the product :
• Outside diameter : 92mm 
• Inner diameter : 38mm 
• Length : 98mm 
• Screw : 6 
• Type of screw : M5

• METALDRIVE® couplings are fully made of steel and are used in all applications where high reliablity, precision, and no maintenance are required.
•  
• METALDRIVE® GMD typw "S" are standard version with single disc pack. The couplings allows axial and angular misalignment. No radial misalignment is allowed. 
•  
• Here are the dimension of the product :
• Outside diameter : 112 mm 
• Inner diameter : 45 mm 
• Length : 100 mm 
• Screw : 6 
• Type of screw : M6

• METALDRIVE® couplings are fully made of steel and are used in all applications where high reliablity, precision, and no maintenance are required.
•  
• METALDRIVE® GMD typw "S" are standard version with single disc pack. The couplings allows axial and angular misalignment. No radial misalignment is allowed. 
•  
• Here are the dimension of the product :
• Outside diameter : 182 mm 
• Inner diameter : 80 mm 
• Length : 174 mm 
• Screw : 6 
• Type of screw : M10

• METALDRIVE® couplings are fully made of steel and are used in all applications where high reliablity, precision, and no maintenance are required.
•  
• METALDRIVE® GMD typw "S" are standard version with single disc pack. The couplings allows axial and angular misalignment. No radial misalignment is allowed. 
•  
• Here are the dimension of the product :
• Outside diameter : 206 mm 
• Inner diameter : 90 mm 
• Length : 175 mm 
• Screw : 6 
• Type of screw : M12

• METALDRIVE® couplings are fully made of steel and are used in all applications where high reliablity, precision, and no maintenance are required.
•  
• METALDRIVE® GMD typw "S" are standard version with single disc pack. The couplings allows axial and angular misalignment. No radial misalignment is allowed. 
•  
• Here are the dimension of the product :
• Outside diameter : 80 mm 
• Inner diameter : 32 mm 
• Length : 88 mm 
• Screw : 6 
• Type of screw : M5

• METALDRIVE® couplings are fully made of steel and are used in all applications where high reliablity, precision, and no maintenance are required.
•  
• METALDRIVE® GMD typw "S" are standard version with single disc pack. The couplings allows axial and angular misalignment. No radial misalignment is allowed. 
•  
• Here are the dimension of the product :
• Outside diameter : 92mm 
• Inner diameter : 38mm 
• Length : 98mm 
• Screw : 6 
• Type of screw : M5

• METALDRIVE® couplings are fully made of steel and are used in all applications where high reliablity, precision, and no maintenance are required.
•  
• METALDRIVE® GMD typw "S" are standard version with single disc pack. The couplings allows axial and angular misalignment. No radial misalignment is allowed. 
•  
• Here are the dimension of the product :
• Outside diameter : 112 mm 
• Inner diameter : 45 mm 
• Length : 100 mm 
• Screw : 6 
• Type of screw : M6

• METALDRIVE® couplings are fully made of steel and are used in all applications where high reliablity, precision, and no maintenance are required.
•  
• METALDRIVE® GMD typw "S" are standard version with single disc pack. The couplings allows axial and angular misalignment. No radial misalignment is allowed. 
•  
• Here are the dimension of the product :
• Outside diameter : 182 mm 
• Inner diameter : 80 mm 
• Length : 174 mm 
• Screw : 6 
• Type of screw : M10

• METALDRIVE® couplings are fully made of steel and are used in all applications where high reliablity, precision, and no maintenance are required.
•  
• METALDRIVE® GMD typw "S" are standard version with single disc pack. The couplings allows axial and angular misalignment. No radial misalignment is allowed. 
•  
• Here are the dimension of the product :
• Outside diameter : 206 mm 
• Inner diameter : 90 mm 
• Length : 175 mm 
• Screw : 6 
• Type of screw : M12

No description for this product yet.

• SIT-LOCK® locking assembly unit consists of four pieces with two inside double-one rings joined through a set of tightening screws. It is recomended for medium torques. Although it is not self centering, it can be easily assembled and diassembled.
•  
• Here are the dimensions of product :
• Inner Diameter : refer to numbers writen after "F" in every product name. For example, CAL1F20/47; so, the inner diameter is 20 mm. 
• Outside Diameter : refer to the last number in every product name. For example, CAL1F20/47; so, the outside diameter is 47 mm. 
• High : 20 mm
• Screws : 8
• Type of Screws : M6

• SIT-LOCK® locking assembly unit consists of four pieces with two inside double-one rings joined through a set of tightening screws. It is recomended for medium torques. Although it is not self centering, it can be easily assembled and diassembled.
•  
• Here are the dimensions of product :
• Inner Diameter : refer to numbers writen after "F" in every product name. For example, CAL1F20/47; so, the inner diameter is 20 mm. 
• Outside Diameter : refer to the last number in every product name. For example, CAL1F20/47; so, the outside diameter is 47 mm. 
• High : 20 mm
• Screws : 12
• Type of Screws : M6

• SIT-LOCK® locking assembly unit consists of four pieces with two inside double-one rings joined through a set of tightening screws. It is recomended for medium torques. Although it is not self centering, it can be easily assembled and diassembled.
•  
• Here are the dimensions of product :
• Inner Diameter : refer to numbers writen after "F" in every product name. For example, CAL1F20/47; so, the inner diameter is 20 mm. 
• Outside Diameter : refer to the last number in every product name. For example, CAL1F20/47; so, the outside diameter is 47 mm. 
• High : 24 mm
• Screws : 12
• Type of Screws : M8

• SIT-LOCK® locking assembly unit consists of four pieces with two inside double-one rings joined through a set of tightening screws. It is recomended for medium torques. Although it is not self centering, it can be easily assembled and diassembled.
•  
• Here are the dimensions of product :
• Inner Diameter : refer to numbers writen after "F" in every product name. For example, CAL1F20/47; so, the inner diameter is 20 mm. 
• Outside Diameter : refer to the last number in every product name. For example, CAL1F20/47; so, the outside diameter is 47 mm. 
• High : 24 mm
• Screws : 12
• Type of Screws : M8

• Locking elements consist of one internal and one external tapered rings. They are designed to work in combination with a clamp flange which can be bolted on a hub or shaft depending on application need. 
•  
• Here are the dimensions of product :
• Inner Diameter : refer to numbers writen after "F" in every product name. For example, CAL2F10/13; so, the inner diameter is 10 mm. 
• Outside Diameter : refer to the last number in every product name. For example, CAL2F10/13; so, the outside diameter is 13 mm. 
• Width : 4.5 mm

• Locking elements consist of one internal and one external tapered rings. They are designed to work in combination with a clamp flange which can be bolted on a hub or shaft depending on application need. 
•  
• Here are the dimensions of product :
• Inner Diameter : refer to numbers writen after "F" in every product name. For example, CAL2F10/13; so, the inner diameter is 10 mm. 
• Outside Diameter : refer to the last number in every product name. For example, CAL2F10/13; so, the outside diameter is 13 mm. 
• Width : 8 mm

• Locking assembly with single taper design. Consists of two tapered rings and a spacer. It has minimum overall dimensions in virtue of the reduced thickness of the cones.
• SIT-LOCK® 3 is suitable for the applications where small hubs are requested. It is recommended for mid-high torques and is self centering. 
•  
• For the dimension of the product, please download the catalog in the document section

• Locking assembly with single taper design. Consists of two tapered rings and a spacer. It has minimum overall dimensions in virtue of the reduced thickness of the cones.
• SIT-LOCK® 3 is suitable for the applications where small hubs are requested. It is recommended for mid-high torques and is self centering. 
•  
• For the dimension of the product, please download the catalog in the document section

• SIT-LOCK® 4 - Self-Centering is suitable for high torques and is self-centering. 
•  
• Recomended for applications that requires high transmission values and excellent centering capabilities such as belt drums.
•  
•  
• Here are the dimensions of product :
• Inner Diameter : refer to numbers writen after "F" in every product name. For example, CAL4F28/55 so, the inner diameter is 28 mm. 
• Outside Diameter : refer to the last number in every product name. For example, CAL4F28/55; so, the outside diameter is 55 mm. 
• High : 45 mm
• Screws : 8
• Type of Screws : M6

• SIT-LOCK® 4 - Self-Centering is suitable for high torques and is self-centering. 
•  
• Recomended for applications that requires high transmission values and excellent centering capabilities such as belt drums.
•  
• Here are the dimensions of product :
• Inner Diameter : refer to numbers writen after "F" in every product name. For example, CAL4F48/80; so, the inner diameter is 48 mm. 
• Outside Diameter : refer to the last number in every product name. For example, CAL4F48/80; so, the outside diameter is 80 mm. 
• High : 62 mm
• Screws : 8
• Type of Screws : M8