• The special OPTIGEAR profile allows very high torque transmission and the compensation of axal, angular and radial misalignment (only in the version with 2 hubs). The maximum recommended working temperature is -10 °C a + 80 °C.
•  
• SITEX® ST type "C" are standard type with 2 hubs and one sleeve. Offers compact, powerful design, and easy assembly. 
•  
• Here are the dimension of product : 
• Outside diameter of sleeve : : 95 mm 
• Length of sleeve : 82 mm 

• The special OPTIGEAR profile allows very high torque transmission and the compensation of axal, angular and radial misalignment (only in the version with 2 hubs). The maximum recommended working temperature is -10 °C a + 80 °C.
•  
• SITEX® ST type "C" are standard type with 2 hubs and one sleeve. Offers compact, powerful design, and easy assembly. 
•  
• Here are the dimension of product : 
• Outside diameter of sleeve : : 120 mm 
• Length of sleeve : 90 mm 

• The special OPTIGEAR profile allows very high torque transmission and the compensation of axal, angular and radial misalignment (only in the version with 2 hubs). The maximum recommended working temperature is -10 °C a + 80 °C.
•  
• SITEX® ST type "C" are standard type with 2 hubs and one sleeve. Offers compact, powerful design, and easy assembly. 
•  
• Here are the dimension of product : 
• Outside diameter of sleeve : : 145 mm 
• Length of sleeve : 96 mm 

• The special OPTIGEAR profile allows very high torque transmission and the compensation of axal, angular and radial misalignment (only in the version with 2 hubs). The maximum recommended working temperature is -10 °C a + 80 °C.
•  
• SITEX® ST type "C" are standard type with 2 hubs and one sleeve. Offers compact, powerful design, and easy assembly. 
•  
• Here are the dimension of product : 
• Outside diameter of sleeve : : 175 mm 
• Length of sleeve : 113 mm 

• The special OPTIGEAR profile allows very high torque transmission and the compensation of axal, angular and radial misalignment (only in the version with 2 hubs). The maximum recommended working temperature is -10 °C a + 80 °C.
•  
• SITEX® ST type "C" are standard type with 2 hubs and one sleeve. Offers compact, powerful design, and easy assembly. 
•  
• Here are the dimension of product : 
• Outside diameter of sleeve : : 198 mm 
• Length of sleeve : 130 mm 

• SITEX® gear couplings consist of two toothed hubs which are connected with one internally toothed sleeve. The hubs are made of steel and the teeth, which are both profiled and section crowned, are obtained from milling. The sleeve is manufactured from stabilized 6.6 superpolymade resin.
•  
• Coupling are available from stock, both the standard and the "long" hub execution, which entirely covers the motor shaft.
•  
• Here are the dimensions of couplings with"long" hub execution :
• Outside diameter of sleeve : : 142 mm 
• Outside diameter of the hub : 96 mm 
• Total length : 284 mm 
• Length of sleeve : 73 mm 

SITEX gear couplings of two toothed hubs which are connected with one internally toothed sleeve. The hubs are made of steel and teeth, which are both profiled and section crowned, are milled. The sleeve is manufactured from stabilized 6.6 superpolymade resin.

• SITEX® gear couplings consist of two toothed hubs which are connected with one internally toothed sleeve. The hubs are made of steel and the teeth, which are both profiled and section crowned, are obtained from milling. The sleeve is manufactured from stabilized 6.6 superpolymade resin.
•  
• The torsional rigidity of the sleeve prevents angular speed variation. The combination of steel hubs with polyamide sleeve makes the coupling maintenance and lubrication free. 
•  
• The particular toothed profile prevents contact of tooth edged with the sleeve, ensuring long life of the coupling.
•  
• Here are the dimensions of product :
• Outside diameter of sleeve : : 210 mm 
• Outside diameter of the hub : 152 mm 
• Total length : 228 mm 
• Length of sleeve : 102 mm 

• SITEX® gear couplings consist of two toothed hubs which are connected with one internally toothed sleeve. The hubs are made of steel and the teeth, which are both profiled and section crowned, are obtained from milling. The sleeve is manufactured from stabilized 6.6 superpolymade resin.
•  
• Here are the dimensions of product :
• Outside diameter of sleeve : : 270 mm 
• Outside diameter of the hub : 192 mm 
• Total length : 290 mm 
• Length of sleeve : 134 mm 

• SITEX® gear couplings consist of two toothed hubs which are connected with one internally toothed sleeve. The hubs are made of steel and the teeth, which are both profiled and section crowned, are obtained from milling. The sleeve is manufactured from stabilized 6.6 superpolymade resin.
•  
• Here are the dimensions of product :
• Outside diameter of sleeve : : 175 mm 
• Outside diameter of the hub : 124 mm 
• Total length : 186 mm 
• Length of sleeve : 93 mm 

• The special OPTIGEAR profile allows very high torque transmission and the compensation of axal, angular and radial misalignment (only in the version with 2 hubs). The maximum recommended working temperature is -10 °C a + 80 °C.
•  
• SITEX® ST type "C" are standard type with 2 hubs and one sleeve. Offers compact, powerful design, and easy assembly. 
•  
• Here are the dimension of product : 
• Outside diameter of the hub : 40 mm 
• Outside diameter of the sleeve : 70 mm 
• Full length : 85 mm 
• Length of sleeve : 61 mm 

The special OPTIGEAR profile allows very high torque transmission and the compensation of axal, angular and radial misalignment (only in the version with 2 hubs). The maximum recommended working temperature is -10 °C a + 80 °C.

SITEX® ST type "C" are standard type with 2 hubs and one sleeve. Offers compact, powerful design, and easy assembly. 

Here are the dimension of product : 

• Outside diameter of the hub : 55 mm 
• Outside diameter of the sleeve : 85 mm 
• Full length : 100 mm 
• Length of sleeve : 65 mm 

The special OPTIGEAR profile allows very high torque transmission and the compensation of axal, angular and radial misalignment (only in the version with 2 hubs). The maximum recommended working temperature is -10 °C a + 80 °C.

SITEX® ST type "C" are standard type with 2 hubs and one sleeve. Offers compact, powerful design, and easy assembly. 

Here are the dimension of product : 

• Outside diameter of the hub : 65 mm 
• Outside diameter of the sleeve : 95 mm 
• Full length : 115 mm 
• Length of sleeve : 82 mm 

• The special OPTIGEAR profile allows very high torque transmission and the compensation of axal, angular and radial misalignment (only in the version with 2 hubs). The maximum recommended working temperature is -10 °C a + 80 °C.
•  
• SITEX® ST type "C" are standard type with 2 hubs and one sleeve. Offers compact, powerful design, and easy assembly. 
•  
• Here are the dimension of product : 
• Outside diameter of the hub : 85 mm 
• Outside diameter of the sleeve : 120 mm 
• Full length : 140 mm 
• Length of sleeve : 68 mm 

• The special OPTIGEAR profile allows very high torque transmission and the compensation of axal, angular and radial misalignment (only in the version with 2 hubs). The maximum recommended working temperature is -10 °C a + 80 °C.
•  
• SITEX® ST type "C" are standard type with 2 hubs and one sleeve. Offers compact, powerful design, and easy assembly. 
•  
• Here are the dimension of product : 
• Outside diameter of the hub : 110 mm 
• Outside diameter of the sleeve : 145 mm 
• Full length : 153 mm 
• Length of sleeve : 96 mm 

• The special OPTIGEAR profile allows very high torque transmission and the compensation of axal, angular and radial misalignment (only in the version with 2 hubs). The maximum recommended working temperature is -10 °C a + 80 °C.
•  
• SITEX® ST type "C" are standard type with 2 hubs and one sleeve. Offers compact, powerful design, and easy assembly. 
•  
• Here are the dimension of product : 
• Outside diameter of the hub : 130 mm 
• Outside diameter of the sleeve : 175  mm 
• Full length : 170 mm 
• Length of sleeve : 113 mm 

• The special OPTIGEAR profile allows very high torque transmission and the compensation of axal, angular and radial misalignment (only in the version with 2 hubs). The maximum recommended working temperature is -10 °C a + 80 °C.
•  
• SITEX® ST type "C" are standard type with 2 hubs and one sleeve. Offers compact, powerful design, and easy assembly. 
•  
• Here are the dimension of product : 
• Outside diameter of the hub : 150 mm 
• Outside diameter of the sleeve : 198 mm 
• Full length : 216 mm 
• Length of sleeve : 130 mm 

• SITEX® gear couplings consist of two toothed hubs which are connected with one internally toothed sleeve. The sleeve is manufactured from stabilized 6.6 superpolyamide resin. 
•  
• The torsional rigidity of the sleeve prevents angular speed variation. The combination of steel hubs with polyamide sleeve makes the coupling maintenance and lubrication free. 
•  
• The particular toothed profile prevents contact of tooth edged with the sleeve, ensuring long life of the coupling.
•  
• Here are the dimensions of product : 
• Outside diameter : 210 mm
• Length : 102 mm 

• SITEX® gear couplings consist of two toothed hubs which are connected with one internally toothed sleeve. The sleeve is manufactured from stabilized 6.6 superpolyamide resin. 
•  
• The torsional rigidity of the sleeve prevents angular speed variation. The combination of steel hubs with polyamide sleeve makes the coupling maintenance and lubrication free. 
•  
• The particular toothed profile prevents contact of tooth edged with the sleeve, ensuring long life of the coupling.
•  
• Here are the dimensions of product : 
• Outside diameter : 270 mm
• Length : 134 mm 

• SITEX® gear couplings consist of two toothed hubs which are connected with one internally toothed sleeve. The hubs are made of steel and the teeth, which are both profiled and section crowned, are obtained from milling. The sleeve is manufactured from stabilized 6.6 superpolymade resin.
•  
• Here are the dimensions of product :
• Outside diameter of the hub : 152 mm 
• Length hub : 110 mm

• SITEX® gear couplings consist of two toothed hubs which are connected with one internally toothed sleeve. The hubs are made of steel and the teeth, which are both profiled and section crowned, are obtained from milling. The sleeve is manufactured from stabilized 6.6 superpolymade resin.
•  
• Here are the dimensions of product :
• Outside diameter of sleeve : : 270 mm 
• Outside diameter of the hub : 192 mm 
• Total length : 290 mm 
• Length of sleeve : 134 mm 

No description for this product yet.

No description for this product yet.

No description for this product yet.