• SIT - WEDGE belts are manufactured in accordance with American standards RMA and MPTA. Available in two different ranges : 
• - MC range (Raw Edge and Moulded Cog) : up to 2995 mm length 
• - E range (Envelope) : over 2995 mm length. 
•  
• The product size 
• For example, CW8V1000
• - 8V = Section, with belt width 25.4 mm and high belt 23 mm 
• - 1000 = Effective length x 10 (inches)

• SIT EXCELITE® ES - Narrow V-Belts are manufactured in accordance with ISO 4184 -and DIN 7753.
•  
• Our high performance narrow v-belts have been specially designed for heavy-duty applications to deliver up to 50% more power than classical v-belts. Can be used in a wide range of industrial and agricultural fields such as compressor, fans, pumps and the other heavy-duty equipment.
•  
• Here are the product dimension : 
• - Belt width : 10 mm 
• - High belt : 8 mm
• - Inside length : refer to the last number in every product names, for example : CLSPZ487, so the inside length is 487 mm.

• SIT EXCELITE® ES belts are manufactured in according with ISO 4184 and DIN 2215.
•  
• Due to the special insulation filler and the treatment of the tensile members, we are able to achieve a strong adhesion between cords and rubber base.
•  
• For this reason EXCELITE® ES belts can be used in a wide range of industrial and agricultural applications and guarantee high reliability and long lifetime. 
•  
• Here are the product dimension : 
• - Belt width : 16 mm 
• - High belt : 11 mm
• - Inside length : refer to the last number in every product names, for example : CLB23, so the inside length is 23inches

No description for this product yet.

• The CLASSICA® synchronous belt, being designed with imperial pitch, is a valid and economical altenative solution in low/medium torque transmission systems. 
•  
• Reduced elongation, no need of lubrication and low wearing makes this belt an economic and reliable option. 
•  
• How to measure the size of a product : 
• For example, CD210L075
• - 210 = pitch length x 10 (inches) 
• - L = pitch 
• - 75 = belt width x 100 (inches) 

• The CLASSICA® synchronous belt, being designed with imperial pitch, is a valid and economical altenative solution in low/medium torque transmission systems. 
•  
• Reduced elongation, no need of lubrication and low wearing makes this belt an economic and reliable option. 
•  
• How to measure the size of a product : 
• For example, CD210L075
• - 210 = pitch length x 10 (inches) 
• - L = pitch 
• - 75 = belt width x 100 (inches) 

No description for this product yet.

No description for this product yet.

• TOP DRIVE® HTD belt is an evolution of standard positive drive belts. The tooth shape is the HTD profile according to ISO 13050.
•  
• This profile has been used for many years in a wide range of applications and it is well known for its outstanding performances. Power transmission is much higher compared to the classic inch trapezodial profile. 
•  
• The circular-arc tooth provides superior tooth jump resistance and provides a smooth tooth engagement. The noise level is remarkably reduced if compared to the classic trapezodial belts.
•  
• How to measure the size of a product : 
• For example, CHD1064-8M20 
• - 1640 = pitch length (mm)
• - 8M = pitch 
• - 20 = belt width (mm)

• TOP DRIVE® HTD belt is an evolution of standard positive drive belts. The tooth shape is the HTD profile according to ISO 13050.
•  
• This profile has been used for many years in a wide range of applications and it is well known for its outstanding performances. Power transmission is much higher compared to the classic inch trapezodial profile. 
•  
• The circular-arc tooth provides superior tooth jump resistance and provides a smooth tooth engagement. The noise level is remarkably reduced if compared to the classic trapezodial belts.
•  
• How to measure the size of a product : 
• For example, CHD1064-8M20 
• - 1640 = pitch length (mm)
• - 8M = pitch 
• - 20 = belt width (mm)

No description for this product yet.

No description for this product yet.

• SIT-LOCK® 10 are shrink disk couplings with double taper design. They offer easy engular timing and axial adjustment of shaft ends. 
•  
• Transmit high torque and bending moment without keys and offer a low cost solution for shaft to shaft rigid connection. 
•  
• Here are the dimensions of product :
• Inner Diameter : refer to numbers writen after "F" in every product name. For example, CAL10F17/45; so, the inner diameter is 17 mm. 
• Outside Diameter : refer to the last number in every product name. For example, CAL10F17/45; so, the outside diameter is 45 mm. 
• High : 50 mm
• Screws : 4
• Type of Screws : M6

No description for this product yet.

No description for this product yet.

No description for this product yet.

No description for this product yet.

No description for this product yet.

• Our pulleys can be used for application with a speed up to 35m/s. The pulley dimensions are very accurate as they are manufactured only by means of CNC or automatic lathes. 
•  
• For higher speed is strongly recomended to use steel as material of construction. Our PBT pulleys are satically balanced according to ISO. 
•  
• The PT pulleys are not balanced, as they do not have a finished bores.
•  
• Here are the dimensions of "PBT" SPZ with taper bush 1108 :
• - Belt type : SPZ
• - Taperbush : 1108
• - Shaft diameter range : 11 - 28 mm
• - Pitch diameter : refer to numbers writen after "PBT" in every product name. 
• For example, product name : PBT063SPZ2 (1108); so, the pitch diameter is 63 mm
• - Outside diameter : you can add the pitch diameter with 4 to know the length of outside diameter. 
• For example, the product is PBT063SPZ2 (1108); so the outside diameter is 63 + 4 = 67 mm
• - Groove : refer to the last number in every product name. 
• For example for PBT063SPZ2; so, the groove is 2 
•  
• See recomendation taperbush below.

• Type of belt : L
• Pitch : 9252 mm
• Pitch diameter : 150.83 mm
• Outside diameter + flange: -
• Teeth : 50
• Belt width : 0.75 inch
• Type of pulley : 3
• Material : Cast iron
• Flange : Without flanges

• Of this series both single and double joints are available.Types E are with sliding bushes while type H has needle roller bearings. 
•  
• Joints with plain bearings are available in 2 versions :
• - Types E to DIN 808;
• - Type EB to DIN 808/7551
•  
• Precision joint series "E" (DIN 808) wear resistant sliding bushes from cemented and hardened steel. Strong, precise, and versatile; wide application field.
• Max. angel : 45° type "E", 90° type "ED". Max. speed 1.000 rpm.  
•  
• Here are the dimension of product : 
• Outside diameter : 80 mm
• Inner diameter : 40 mm
• Length of half joint : 80 mm
• Full length : 245 mm 

• Inner Diameter : 340 mm
• Outside Diameter : 425 mm
• High : 177 mm
• Screws : 24
• Type of Screws : M20

No description for this product yet.

No description for this product yet.