All Products 20223
.png)
Call us
[Please login to see price]
Call us
[Please login to see price]
Call us
Call us
SIT
- TOP DRIVE® HTD belt is an evolution of standard positive drive belts. The tooth shape is the HTD profile according to ISO 13050.
- This profile has been used for many years in a wide range of applications and it is well known for its outstanding performances. Power transmission is much higher compared to the classic inch trapezodial profile.
- The circular-arc tooth provides superior tooth jump resistance and provides a smooth tooth engagement. The noise level is remarkably reduced if compared to the classic trapezodial belts.
- How to measure the size of a product :
- For example, CHD1064-8M20
- - 1640 = pitch length (mm)
- - 8M = pitch
- - 20 = belt width (mm)
[Please login to see price]
Ask Quote
Call us
SIT
- TOP DRIVE® HTD belt is an evolution of standard positive drive belts. The tooth shape is the HTD profile according to ISO 13050.
- This profile has been used for many years in a wide range of applications and it is well known for its outstanding performances. Power transmission is much higher compared to the classic inch trapezodial profile.
- The circular-arc tooth provides superior tooth jump resistance and provides a smooth tooth engagement. The noise level is remarkably reduced if compared to the classic trapezodial belts.
- How to measure the size of a product :
- For example, CHD1064-8M20
- - 1640 = pitch length (mm)
- - 8M = pitch
- - 20 = belt width (mm)
[Please login to see price]
Ask Quote
Call us
Call us
SIT
- Locking assembly with single taper design. Consists of two tapered rings and a spacer. It has minimum overall dimensions in virtue of the reduced thickness of the cones.
- SIT-LOCK® 3 is suitable for the applications where small hubs are requested. It is recommended for mid-high torques and is self centering.
- For the dimension of the product, please download the catalog in the document section
[Please login to see price]
Ask Quote
Call us
.png)
SIT
- SIT-LOCK® 10 are shrink disk couplings with double taper design. They offer easy engular timing and axial adjustment of shaft ends.
- Transmit high torque and bending moment without keys and offer a low cost solution for shaft to shaft rigid connection.
- Here are the dimensions of product :
- Inner Diameter : refer to numbers writen after "F" in every product name. For example, CAL10F17/45; so, the inner diameter is 17 mm.
- Outside Diameter : refer to the last number in every product name. For example, CAL10F17/45; so, the outside diameter is 45 mm.
- High : 85 mm
- Screws : 6
- Type of Screws : M8
[Please login to see price]
Ask Quote
Call us
Call us
Call us
Call us
Call us
SIT
- Type of belt : L
- Pitch : 9252 mm
- Pitch diameter : 156.90 mm
- Outside diameter + flange: -
- Teeth : 52
- Type of bush : 1610; max bore : 42 mm
- Belt width : 1.00 inch
- Type of pulley : 11
- Material : Cast iron
- Flange : Without flanges
[Please login to see price]
Ask Quote
Call us
.png)
SIT
- Type of belt : AT10
- Pitch : 10 mm
- Pitch diameter : 84.10 mm
- Outside diameter + flange: 88 mm
- Teeth : 27
- Belt width : 16 mm
- Type of pulley : 2
- Material : Aluminium
[Please login to see price]
Ask Quote
Call us
SIT
- Of this series both single and double joints are available.Types E are with sliding bushes while type H has needle roller bearings.
- Joints with plain bearings are available in 2 versions :
- - Types E to DIN 808;
- - Type EB to DIN 808/7551
- Precision joint series "E" (DIN 808) wear resistant sliding bushes from cemented and hardened steel. Strong, precise, and versatile; wide application field.
- Here are the dimension of product :
- Outside diameter : 70 mm
- Inner diameter : 40 mm
- Length of half joint : 83 mm
- Full length : 238 mm
[Please login to see price]
Ask Quote
Call us
Call us
Call us
Call us
Call us
Call us
Call us
