• TORQUE-FLEX® - Classical high performance belts are manufactured in accordance with European standards ISO 4184 and DIN 7753. 
•  
• Designed for operating at high speeds over small diameter pulleys and short center distances. Also for use in multiple v-belt drives where high shock load and heavy-duty loads are encountered; compressors, industrial fans, textile machinery, woodworking machinery, and construction equipment. 
•  
• Here are the product dimensions : 
• - Section : CX
• - Belt width : 22 mm
• - High belt : 14 mm
• - Inside length : refer to the last number in every product names, for example : CTCX100, so the inside length is 100 inches. 

• TORQUE-FLEX® - Classical high performance belts are manufactured in accordance with European standards ISO 4184 and DIN 7753. 
•  
• Designed for operating at high speeds over small diameter pulleys and short center distances. Also for use in multiple v-belt drives where high shock load and heavy-duty loads are encountered; compressors, industrial fans, textile machinery, woodworking machinery, and construction equipment. 
•  
• Here are the product dimensions : 
• - Section : BX
• - Belt width : 17 mm
• - High belt : 11 mm
• - Inside length : refer to the last number in every product names, for example : CTBX100, so the inside length is 100 inches. 

• SIT EXCELITE® ES - Narrow V-Belts are manufactured in accordance with ISO 4184 -and DIN 7753.
•  
• Our high performance narrow v-belts have been specially designed for heavy-duty applications to deliver up to 50% more power than classical v-belts. Can be used in a wide range of industrial and agricultural fields such as compressor, fans, pumps and the other heavy-duty equipment.
•  
• Here are the product dimension : 
• - Belt width : 22 mm 
• - High belt : 18 mm
• - Inside length : refer to the last number in every product names, for example : CLSPC2000, so the inside length is 2000 mm.

• SIT EXCELITE® ES belts are manufactured in according with ISO 4184 and DIN 2215.
•  
• Due to the special insulation filler and the treatment of the tensile members, we are able to achieve a strong adhesion between cords and rubber base.
•  
• For this reason EXCELITE® ES belts can be used in a wide range of industrial and agricultural applications and guarantee high reliability and long lifetime. 
•  
• Here are the product dimension : 
• - Belt width : 16 mm 
• - High belt : 11 mm
• - Inside length : refer to the last number in every product names, for example : CLB23, so the inside length is 23inches

No description for this product yet.

• The CLASSICA® synchronous belt, being designed with imperial pitch, is a valid and economical altenative solution in low/medium torque transmission systems. 
•  
• Reduced elongation, no need of lubrication and low wearing makes this belt an economic and reliable option. 
•  
• How to measure the size of a product : 
• For example, CD210L075
• - 210 = pitch length x 10 (inches) 
• - L = pitch 
• - 75 = belt width x 100 (inches) 

• The CLASSICA® synchronous belt, being designed with imperial pitch, is a valid and economical altenative solution in low/medium torque transmission systems. 
•  
• Reduced elongation, no need of lubrication and low wearing makes this belt an economic and reliable option. 
•  
• How to measure the size of a product : 
• For example, CD210L075
• - 210 = pitch length x 10 (inches) 
• - L = pitch 
• - 75 = belt width x 100 (inches) 

• Hi-Performance Pd® Plus synchronous belts provide a reliable, economical, and trouble-free alternative to transmit power and reduce drive weight and cost when compared to classic V-belts. Lubrication and tensioning devices are not needed thus creating a cleaner, maintenance free synchronous drive. 
•  
• Hi-Performance Pd® Plus belts have been designed for performance exceeding the traditional limitation of the first generation of HTD belt drives. 
•  
• The product size : Example for HPPD 1040 P8M 20
• - !040 = Pitch length (mm)
• - P8M = Pitch 
• - 20 = Belt width (mm)

No description for this product yet.

• TOP DRIVE® HTD belt is an evolution of standard positive drive belts. The tooth shape is the HTD profile according to ISO 13050.
•  
• This profile has been used for many years in a wide range of applications and it is well known for its outstanding performances. Power transmission is much higher compared to the classic inch trapezodial profile. 
•  
• The circular-arc tooth provides superior tooth jump resistance and provides a smooth tooth engagement. The noise level is remarkably reduced if compared to the classic trapezodial belts.
•  
• How to measure the size of a product : 
• For example, CHD1064-8M20 
• - 1640 = pitch length (mm)
• - 8M = pitch 
• - 20 = belt width (mm)

No description for this product yet.

• SIT TAPER LOCK BUSHING is designed to give the following:
• 1. Perfect assembly
• 2. rapid dismantling of the pulley and other transmission equipment
• 3. No special tools requirement except hexagonal key
•  
• The large range of finished bores available ensures that an immediate assembly can be made thus avoiding costly factory down-time.
•  
• Here are the dimensions of Taper Bushing with type 1008 (25.20)
• - Bore : we provide taper bushing with minimal bore 9 mm and 3/8 inches; for the max bore you can look at the number writen after "BC" in every product name. 
• for example, BC2520F09 (1008X09MM), so the max bore is 25 mm.
• - Width : the numbers writen in every product name before "F" is width size.
• for example, BC2520F09 (1008X09MM), so the width is 20 mm.
• - Bore size : look at the last number in every product name. 
• for example, BC2520F09, so the bore size is 9.

• Type of belt : 14 M 
• Pitch :  14 mm
• Pitch diameter : 1173.67 mm
• Outside diameter + flange : -
• Teeth : 264
• Type of bush : 3030
• Belt width : 40 mm
• Type of pulley :12
• Material : Cast iron
• Flange : Without flanges 

• SIT-LOCK® 4 - Self-Centering is suitable for high torques and is self-centering. 
•  
• Recomended for applications that requires high transmission values and excellent centering capabilities such as belt drums.
•  
• Here are the dimensions of product :
• Inner Diameter : 45 mm 
• Outside Diameter : 75 mm 
• High : 45 mm
• Screws : 8
• Type of Screws : M6

• Shrink discs are external locking devices which are installed over hub projections. By locking the screws, radial pressures act on the hub allowing an effective and solid connection.
• Recommended for medium and high torque. For SIT-LOCK® is also available in "SPLIT" and "HALF" for special applications.
•  
• For the dimension of the product, please download the catalog in the document section

No description for this product yet.

No description for this product yet.

No description for this product yet.

No description for this product yet.

No description for this product yet.

• Type of belt : L
• Pitch : 9525 mm
• Pitch diameter : 156.90 mm
• Outside diameter + flange: -
• Teeth : 52
• Belt width : 1.00 inch
• Type of pulley : 3
• Material : Cast iron
• Flange : Without flanges

• Extensible transmissions series "E" (DIN 808)
•  
• Joints series "E" type "EA" with wear resistant sliding bushes and special execution upon request.
•  
• Here are the dimension of product : 
• outside diameter : 70 mm
• inner diameter : 35 mm 
• Length of half joint : 140 mm
• Full length : Min and Max. length upon reques

No description for this product yet.

No description for this product yet.