• The CLASSICA® synchronous belt, being designed with imperial pitch, is a valid and economical altenative solution in low/medium torque transmission systems. 
•  
• Reduced elongation, no need of lubrication and low wearing makes this belt an economic and reliable option. 
•  
• How to measure the size of a product : 
• For example, CD210L075
• - 210 = pitch length x 10 (inches) 
• - L = pitch 
• - 75 = belt width x 100 (inches) 

• Hi-Performance Pd® Plus synchronous belts provide a reliable, economical, and trouble-free alternative to transmit power and reduce drive weight and cost when compared to classic V-belts. Lubrication and tensioning devices are not needed thus creating a cleaner, maintenance free synchronous drive. 
•  
• Hi-Performance Pd® Plus belts have been designed for performance exceeding the traditional limitation of the first generation of HTD belt drives. 
•  
• The product size : Example for HPPD 1040 P8M 20
• - !040 = Pitch length (mm)
• - P8M = Pitch 
• - 20 = Belt width (mm)

No description for this product yet.

• TOP DRIVE® HTD belt is an evolution of standard positive drive belts. The tooth shape is the HTD profile according to ISO 13050.
•  
• This profile has been used for many years in a wide range of applications and it is well known for its outstanding performances. Power transmission is much higher compared to the classic inch trapezodial profile. 
•  
• The circular-arc tooth provides superior tooth jump resistance and provides a smooth tooth engagement. The noise level is remarkably reduced if compared to the classic trapezodial belts.
•  
• How to measure the size of a product : 
• For example, CHD1064-8M20 
• - 1640 = pitch length (mm)
• - 8M = pitch 
• - 20 = belt width (mm)

No description for this product yet.

• Type of belt : 14 M 
• Pitch : 14 mm
• Pitch diameter : 353.71 mm
• Outside diameter + flange : -
• Teeth : 80
• Belt width : 115 mm
• Type of pulley : 11
• Material : Cast iron
• Flange : Without flanges 

• HTD pulleys have a different design from the traditional toothed pulleys. The axial grooves are designed to allow the beltteeth to catch the pulley teeth with negligible triction. HTD Pulleys are available with full hub and for assembly with SER-SIT taper bushing.
•  
• Product detail 
• Type of belt : 14 M 
• Pitch :  14 mm
• Pitch diameter : 353.71 mm
• Outside diameter + flange : -
• Teeth : 80
• Type of bush : 3020 
• Belt width : 55 mm
• Type of pulley :14
• Material : Cast iron
• Flange : Without flanges 

• SIT-LOCK® 4 - Self-Centering is suitable for high torques and is self-centering. 
•  
• Recomended for applications that requires high transmission values and excellent centering capabilities such as belt drums.
•  
• Here are the dimensions of product :
• Inner Diameter : refer to numbers writen after "F" in every product name. For example, CAL4F60/90; so, the inner diameter is 60 mm. 
• Outside Diameter : refer to the last number in every product name. For example, CAL4F60/90; so, the outside diameter is 90 mm. 
• High : 62 mm
• Screws : 10 
• Type of Screws : M8

• Shrink discs are external locking devices which are installed over hub projections. By locking the screws, radial pressures act on the hub allowing an effective and solid connection.
• Recommended for medium and high torque. For SIT-LOCK® is also available in "SPLIT" and "HALF" for special applications.
•  
• For the dimension of the product, please download the catalog in the document section

No description for this product yet.

No description for this product yet.

No description for this product yet.

No description for this product yet.

No description for this product yet.

No description for this product yet.

• Type of belt : L
• Pitch : 9525 mm
• Pitch diameter : 196.31 mm
• Outside diameter + flange: -
• Teeth : 65
• Belt width : 1.00 inch
• Type of pulley : 3
• Material : Cast iron
• Flange : Without flanges

• Type of belt : H
• Pitch : 12700 mm
• Pitch diameter : 115.86mm
• Outside diameter + flange: 121 mm
• Teeth : 29
• Type of bush : 1610; max bore : 42 mm
• Belt width : 1.00 inch
• Type of pulley : 4
• Material : Cast iron
• Flange : With flanges

• Extensible transmissions series "E" (DIN 808)
•  
• Joints series "E" type "EA" with wear resistant sliding bushes and special execution upon request.
•  
• Here are the dimension of product : 
• outside diameter : 16 mm
• inner diameter : 10 mm 
• Length of half joint : 52 mm
• Full length : Min and Max. length upon request 

No description for this product yet.

No description for this product yet.

No description for this product yet.

No description for this product yet.

No description for this product yet.

No description for this product yet.