All Products 20241
Call us
[Please login to see price]
Call us
Call us
Call us
Call us
Call us
Call us
Call us
Call us
Call us
SIT
STANDART PULLEYS
These pulleys have equally spared grooves machined into the outside diameter, to give correct meshing with the bell teeth.
The pulley grooves are of a special design to give this correct meshing of the belt teeth with minimal friction. all pulleys manufactured have correct minimum meshing tolerancer built in. The pitch diameter is always larger than the outside diameter. The pulleys are normally stocked in a wide range of various diameter (no. of teeth) and standart widths.
These pulleys have equally spared grooves machined into the outside diameter, to give correct meshing with the bell teeth.
The pulley grooves are of a special design to give this correct meshing of the belt teeth with minimal friction. all pulleys manufactured have correct minimum meshing tolerancer built in. The pitch diameter is always larger than the outside diameter. The pulleys are normally stocked in a wide range of various diameter (no. of teeth) and standart widths.
[Please login to see price]
Ask Quote
Call us
.png)
SIT
- Taper Bush :5050
- Shaft Diameter Range : 70 - 125 mm
- Pitch Diameter : 400 mm
- Outside Diameter : 409.6 mm
- Groove : 8
[Please login to see price]
Ask Quote
Call us
Call us
Call us
Call us
Call us
SIT
- TORQUE-FLEX® - Narrow "XP" high performance belts are manufactured in accordance with European standards ISO 4184, DIN 7753 and are approved by API (American Petroleum Institute).
- The belt structure guarantees high transmittable power while the moulded cog profile provides higher flexibility with small diameters pulleys.
- Here are the product dimension :
- - Section : XPZ
- - Belt width : 10 mm
- - High belt : 8 mm
- - Datum length : refer to the last number in every product names, for example : CSXPZ512, so the datum length is 512 mm,
[Please login to see price]
Ask Quote
Call us
SIT
- TORQUE-FLEX® - Classical high performance belts are manufactured in accordance with European standards ISO 4184 and DIN 7753.
- Designed for operating at high speeds over small diameter pulleys and short center distances. Also for use in multiple v-belt drives where high shock load and heavy-duty loads are encountered; compressors, industrial fans, textile machinery, woodworking machinery, and construction equipment.
- Here are the product dimensions :
- - Section : AX
- - Belt width : 13 mm
- - High belt : 8 mm
- - Inside length : refer to the last number in every product names, for example : CTAX100, so the inside length is 100 inches.
[Please login to see price]
Ask Quote
Call us
SIT
- TORQUE-FLEX® - Classical high performance belts are manufactured in accordance with European standards ISO 4184 and DIN 7753.
- Designed for operating at high speeds over small diameter pulleys and short center distances. Also for use in multiple v-belt drives where high shock load and heavy-duty loads are encountered; compressors, industrial fans, textile machinery, woodworking machinery, and construction equipment.
- Here are the product dimensions :
- - Section : ZX
- - Belt width : 10 mm
- - High belt : 6 mm
- - Inside length : refer to the last number in every product names, for example : CTZX18, so the inside length is 18 inches.
[Please login to see price]
Ask Quote
Call us
SIT
- SIT EXCELITE® ES - Narrow V-Belts are manufactured in accordance with ISO 4184 -and DIN 7753.
- Our high performance narrow v-belts have been specially designed for heavy-duty applications to deliver up to 50% more power than classical v-belts. Can be used in a wide range of industrial and agricultural fields such as compressor, fans, pumps and the other heavy-duty equipment.
- Here are the product dimension :
- - Belt width : 13 mm
- - High belt : 10 mm
- - Inside length : refer to the last number in every product names, for example : CLSPA1000, so the inside length is 1000 mm.
[Please login to see price]
Ask Quote
Call us
SIT
- The CLASSICA® synchronous belt, being designed with imperial pitch, is a valid and economical altenative solution in low/medium torque transmission systems.
- Reduced elongation, no need of lubrication and low wearing makes this belt an economic and reliable option.
- How to measure the size of a product :
- For example, CD210L075
- - 210 = pitch length x 10 (inches)
- - L = pitch
- - 75 = belt width x 100 (inches)
[Please login to see price]
Ask Quote
Call us
SIT
- The CLASSICA® synchronous belt, being designed with imperial pitch, is a valid and economical altenative solution in low/medium torque transmission systems.
- Reduced elongation, no need of lubrication and low wearing makes this belt an economic and reliable option.
- How to measure the size of a product :
- For example, CD210L075
- - 210 = pitch length x 10 (inches)
- - L = pitch
- - 75 = belt width x 100 (inches)
[Please login to see price]
Ask Quote
Call us
SIT
- Hi-Performance Pd® Plus synchronous belts provide a reliable, economical, and trouble-free alternative to transmit power and reduce drive weight and cost when compared to classic V-belts. Lubrication and tensioning devices are not needed thus creating a cleaner, maintenance free synchronous drive.
- Hi-Performance Pd® Plus belts have been designed for performance exceeding the traditional limitation of the first generation of HTD belt drives.
- The product size : Example for HPPD 1040 P8M 20
- - !040 = Pitch length (mm)
- - P8M = Pitch
- - 20 = Belt width (mm)
[Please login to see price]
Ask Quote
