• TOP DRIVE® HTD belt is an evolution of standard positive drive belts. The tooth shape is the HTD profile according to ISO 13050.
•  
• This profile has been used for many years in a wide range of applications and it is well known for its outstanding performances. Power transmission is much higher compared to the classic inch trapezodial profile. 
•  
• The circular-arc tooth provides superior tooth jump resistance and provides a smooth tooth engagement. The noise level is remarkably reduced if compared to the classic trapezodial belts.
•  
• How to measure the size of a product : 
• For example, CHD1064-8M20 
• - 1640 = pitch length (mm)
• - 8M = pitch 
• - 20 = belt width (mm)

• TOP DRIVE® HTD belt is an evolution of standard positive drive belts. The tooth shape is the HTD profile according to ISO 13050.
•  
• This profile has been used for many years in a wide range of applications and it is well known for its outstanding performances. Power transmission is much higher compared to the classic inch trapezodial profile. 
•  
• The circular-arc tooth provides superior tooth jump resistance and provides a smooth tooth engagement. The noise level is remarkably reduced if compared to the classic trapezodial belts.
•  
• How to measure the size of a product : 
• For example, CHD1064-8M20 
• - 1640 = pitch length (mm)
• - 8M = pitch 
• - 20 = belt width (mm)

No description for this product yet.

• SIT TAPER LOCK BUSHING is designed to give the following:
• 1. Perfect assembly
• 2. rapid dismantling of the pulley and other transmission equipment
• 3. No special tools requirement except hexagonal key
•  
• The large range of finished bores available ensures that an immediate assembly can be made thus avoiding costly factory down-time.
•  
•  
• Here are the dimensions of Taper Bushing with type 3039 (75.75)
•  
• - Bore : we provide taper bushing with minimal bore 25 mm and 1-1/4 inches; for the max bore you can look at the number writen after "BC" in every product name. 
• for example, BC7575F25 (3030X25MM), so the max bore is 75 mm.
• - Width : the numbers writen in every product name before "F" is width size.
• for example,BC7575F25 (3030X25MM), so the width is 75 mm.
• - Bore size : look at the last number in every product name. 
• for example, BC7575F25, so the bore size is 25.

• Type of belt : S 8 M 
• Pitch :  8 mm
• Pitch diameter : 202.35 mm
• Outside diameter + flange : - 
• Teeth : 80
• Belt width : refer to the last number in product name (for example, ST80-ST80-S8M20, so, the belt width is 20mm) 
• Type of pulley : 8
• Material : Cast iron
• Flange : Without flanges 

• METALDRIVE® couplings are fully made of steel and are used in all applications where high reliablity, precision, and no maintenance are required.
•  
• METALDRIVE® GMD typw "S" are standard version with single disc pack. The couplings allows axial and angular misalignment. No radial misalignment is allowed. 
•  
• Here are the dimension of the product :
• Outside diameter : 352 mm 
• Inner diameter : 155 mm 
• Length : 332 mm 
• Screw : 8 
• Type of screw : M24

• Locking assembly with single taper design. It is suitable for high torques. Provide good concentricity and self centring. 
• It is recommended for medium torques and is self-centering. The flange design prevent axial movement during installation. 
•  
• For the dimension of the product, please download the catalog in the document section.

• SIT-LOCK® 12 is self-centering unit and convenient series. It is suggested for large quantities in applications with medium torques.
•  
• Here are the dimensions of product :
• Inner Diameter : refer to numbers writen after "F" in every product name. For example, CAL12F18/40; so, the inner diameter is 18 mm. 
• Outside Diameter : refer to the last number in every product name. For example, CAL12F18/40; so, the outside diameter is 40 mm. 
• High : 30 mm
• Screws : 8
• Type of Screws : M6

No description for this product yet.

No description for this product yet.

No description for this product yet.

No description for this product yet.

No description for this product yet.

No description for this product yet.

No description for this product yet.

• Type of belt : H
• Pitch : 12700 mm
• Pitch diameter : 99.69 mm
• Outside diameter + flange: 104 mm 
• Teeth : 25
• Belt width : 2.00 inch
• Type of pulley : 1
• Material : Steel
• Flange : With flanges

• Type of belt : H
• Pitch : 12700 mm
• Pitch diameter : 176.50 mm
• Outside diameter + flange: 191 mm
• Teeth : 44
• Type of bush : 2517; max bore : 65 mm
• Belt width : 3.00 inch
• Type of pulley : 5
• Material : Cast iron
• Flange : With flanges

No description for this product yet.

• Stainless steel joints series "X" (DIN 808)
• - Max. angel : 45° type "X", 90° type "XD". 
• - Special executions upon request.
•  
• Here are the dimension of product : 
• Outside diameter : 58 mm
• Inner diameter : 30 mm
• Length of half joint : 61 mm
• Full length : 122 mm 

No description for this product yet.

No description for this product yet.

• TOP DRIVE® HTD belt is an evolution of standard positive drive belts. The tooth shape is the HTD profile according to ISO 13050.
•  
• This profile has been used for many years in a wide range of applications and it is well known for its outstanding performances. Power transmission is much higher compared to the classic inch trapezodial profile. 
•  
• The circular-arc tooth provides superior tooth jump resistance and provides a smooth tooth engagement. The noise level is remarkably reduced if compared to the classic trapezodial belts.
•  
• How to measure the size of a product : 
• For example, CHD1064-8M20 
• - 1640 = pitch length (mm)
• - 8M = pitch 
• - 20 = belt width (mm)

No description for this product yet.

No description for this product yet.