All Products 20241
Call us
[Please login to see price]
Call us
[Please login to see price]
Call us
[Please login to see price]
Call us
Call us
SIT
- SIT TAPER LOCK BUSHING is designed to give the following:
- 1. Perfect assembly
- 2. rapid dismantling of the pulley and other transmission equipment
- 3. No special tools requirement except hexagonal key
- The large range of finished bores available ensures that an immediate assembly can be made thus avoiding costly factory down-time.
- Here are the dimensions of Taper Bushing with type 3039 (75.75)
- - Bore : we provide taper bushing with minimal bore 25 mm and 1-1/4 inches; for the max bore you can look at the number writen after "BC" in every product name.
- for example, BC7575F25 (3030X25MM), so the max bore is 75 mm.
- - Width : the numbers writen in every product name before "F" is width size.
- for example,BC7575F25 (3030X25MM), so the width is 75 mm.
- - Bore size : look at the last number in every product name.
- for example, BC7575F25, so the bore size is 25.
[Please login to see price]
Ask Quote
Call us
SIT
- Type of belt : S 8M
- Pitch : 8 mm
- Pitch diameter : 283.83 mm
- Outside diameter + flange : -
- Teeth : 112
- Belt width : 50 mm
- Type of pulley : 11
- Material : Cast iron
- Flange : Without flanges
[Please login to see price]
Ask Quote
Call us
SIT
- METALDRIVE® couplings are fully made of steel and are used in all applications where high reliablity, precision, and no maintenance are required.
- METALDRIVE® GMD typw "S" are standard version with single disc pack. The couplings allows axial and angular misalignment. No radial misalignment is allowed.
- Here are the dimension of the product :
- Outside diameter : 456 mm
- Inner diameter : 205 mm
- Length : 452 mm
- Screw : 8
- Type of screw : M33
[Please login to see price]
Ask Quote
Call us
SIT
- Locking assembly with single taper design. It is suitable for high torques. Provide good concentricity and self centring.
- It is recommended for medium torques and is self-centering. The flange design prevent axial movement during installation.
- For the dimension of the product, please download the catalog in the document section.
[Please login to see price]
Ask Quote
Call us
SIT
- SIT-LOCK® 12 is self-centering unit and convenient series. It is suggested for large quantities in applications with medium torques.
- Here are the dimensions of product :
- Inner Diameter : refer to numbers writen after "F" in every product name. For example, CAL12F18/40; so, the inner diameter is 18 mm.
- Outside Diameter : refer to the last number in every product name. For example, CAL12F18/40; so, the outside diameter is 40 mm.
- High : 30 mm
- Screws : 8
- Type of Screws : M6
[Please login to see price]
Ask Quote
Call us
Call us
Call us
Call us
Call us
SIT
- Type of belt : H
- Pitch : 12700 mm
- Pitch diameter : 196.71 mm
- Outside diameter + flange: -
- Teeth : 49
- Type of bush : 2517; max bore : 65 mm
- Belt width : 3.00 inch
- Type of pulley : 12
- Material : Cast iron
- Flange : Without flanges
[Please login to see price]
Ask Quote
Call us
Call us
SIT
- Stainless steel joints series "X" (DIN 808)
- - Max. angel : 45° type "X", 90° type "XD".
- - Special executions upon request.
- Here are the dimension of product :
- Outside diameter : 22 mm
- Inner diameter : 10 mm
- Length of half joint : 24 mm
- Full length : 74 mm
[Please login to see price]
Ask Quote
Call us
Call us
Call us
Call us
Call us
Call us
Call us
Call us
