• TOP DRIVE® HTD belt is an evolution of standard positive drive belts. The tooth shape is the HTD profile according to ISO 13050.
•  
• This profile has been used for many years in a wide range of applications and it is well known for its outstanding performances. Power transmission is much higher compared to the classic inch trapezodial profile. 
•  
• The circular-arc tooth provides superior tooth jump resistance and provides a smooth tooth engagement. The noise level is remarkably reduced if compared to the classic trapezodial belts.
•  
• How to measure the size of a product : 
• For example, CHD1064-8M20 
• - 1640 = pitch length (mm)
• - 8M = pitch 
• - 20 = belt width (mm)

• TOP DRIVE® HTD belt is an evolution of standard positive drive belts. The tooth shape is the HTD profile according to ISO 13050.
•  
• This profile has been used for many years in a wide range of applications and it is well known for its outstanding performances. Power transmission is much higher compared to the classic inch trapezodial profile. 
•  
• The circular-arc tooth provides superior tooth jump resistance and provides a smooth tooth engagement. The noise level is remarkably reduced if compared to the classic trapezodial belts.
•  
• How to measure the size of a product : 
• For example, CHD1064-8M20 
• - 1640 = pitch length (mm)
• - 8M = pitch 
• - 20 = belt width (mm)

No description for this product yet.

No description for this product yet.

• SIT TAPER LOCK BUSHING is designed to give the following:
• 1. Perfect assembly
• 2. rapid dismantling of the pulley and other transmission equipment
• 3. No special tools requirement except hexagonal key
•  
• The large range of finished bores available ensures that an immediate assembly can be made thus avoiding costly factory down-time.
•  
• Here are the dimensions of Taper Bushing with type 4040 (100.100)
• - Bore : we provide taper bushing with minimal bore 40 mm; for the max bore you can look at the number writen after "BC" in every product name. 
• for example, BC100100F100 (4040X100MM), so the max bore is 100 mm.
• - Width : the numbers writen in every product name before "F" is width size.
• for example, BC100100F100 (4040X100MM), so the width is 100 mm.
• - Bore size : look at the last number in every product name. 
• for example, BC100100F100, so the bore size is 100.

• Type of belt : S 8 M 
• Pitch :  8 mm
• Pitch diameter : 181.97 mm
• Outside diameter + flange : 191 mm 
• Teeth : 72
• Belt width : 85 mm 
• Type of pulley : 8
• Material : Cast iron
• Flange : With flanges 

• SIT-LOCK® locking assembly unit consists of four pieces with two inside double-one rings joined through a set of tightening screws. It is recomended for medium torques. Although it is not self centering, it can be easily assembled and diassembled.
•  
• Here are the dimensions of product :
• Inner Diameter : refer to numbers writen after "F" in every product name. For example, CAL1F20/47; so, the inner diameter is 20 mm. 
• Outside Diameter : refer to the last number in every product name. For example, CAL1F20/47; so, the outside diameter is 47 mm. 
• High : 20 mm
• Screws : 10
• Type of Screws : M6

• Locking assembly with single taper design. Provides good concentricity and is self centering. 
• SITLOCK® 6 is suitable for applications with medium torques.
•  
• For the dimension of the product, please download the catalog in the document section.

• SIT-LOCK® 13 is very close to the standard type SIT-LOCK® 9, but it is manufactured in a longer execution. It is made of two tapered rings and locking nut. 
•  
• For the dimension of the product, please download the catalog in the document section

• Taper Bush : 4040
• Shaft Diameter Range : 55 - 100 mm
• Pitch Diameter : 560 mm
• Outside Diameter : 567 mm
• Groove : 6

No description for this product yet.

No description for this product yet.

No description for this product yet.

No description for this product yet.

No description for this product yet.

No description for this product yet.

• Type of belt : H
• Pitch : 12700 mm
• Pitch diameter : 55.23 mm
• Outside diameter + flange: 62
• Teeth : 14
• Belt width : 3.00 inch
• Type of pulley : 1
• Material : Steel
• Flange : With flanges

• TRASCO flexible couplings is the flexible and omocinetic coupling that assures the best performance in relation to the physical space occupied in its class. It has a very compact design and allows safe power transmision by absorbing peak loads and torsional vibrations.
•  
• Spider detail 
• Color : Green
• Shore : 64 Sh.D
• Compound : Polyurethane 
• Admissible Temperature [°C] : from - 30 to + 110 (on work)
•  

No description for this product yet.

No description for this product yet.

No description for this product yet.

No description for this product yet.

No description for this product yet.

No description for this product yet.