All Products 20223
Call us
SIT
- The CLASSICA® synchronous belt, being designed with imperial pitch, is a valid and economical altenative solution in low/medium torque transmission systems.
- Reduced elongation, no need of lubrication and low wearing makes this belt an economic and reliable option.
- How to measure the size of a product :
- For example, CD210L075
- - 210 = pitch length x 10 (inches)
- - L = pitch
- - 75 = belt width x 100 (inches)
[Please login to see price]
Ask Quote
Call us
Call us
.png)
SIT
- TOP DRIVE® HTD belt is an evolution of standard positive drive belts. The tooth shape is the HTD profile according to ISO 13050.
- This profile has been used for many years in a wide range of applications and it is well known for its outstanding performances. Power transmission is much higher compared to the classic inch trapezodial profile.
- The circular-arc tooth provides superior tooth jump resistance and provides a smooth tooth engagement. The noise level is remarkably reduced if compared to the classic trapezodial belts.
- How to measure the size of a product :
- For example, CHD1064-8M20
- - 1640 = pitch length (mm)
- - 8M = pitch
- - 20 = belt width (mm)
[Please login to see price]
Ask Quote
Call us
SIT
- TOP DRIVE® HTD belt is an evolution of standard positive drive belts. The tooth shape is the HTD profile according to ISO 13050.
- This profile has been used for many years in a wide range of applications and it is well known for its outstanding performances. Power transmission is much higher compared to the classic inch trapezodial profile.
- The circular-arc tooth provides superior tooth jump resistance and provides a smooth tooth engagement. The noise level is remarkably reduced if compared to the classic trapezodial belts.
- How to measure the size of a product :
- For example, CHD1064-8M20
- - 1640 = pitch length (mm)
- - 8M = pitch
- - 20 = belt width (mm)
[Please login to see price]
Ask Quote
Call us
Call us
SIT
- SIT TAPER LOCK BUSHING is designed to give the following:
- 1. Perfect assembly
- 2. rapid dismantling of the pulley and other transmission equipment
- 3. No special tools requirement except hexagonal key
- The large range of finished bores available ensures that an immediate assembly can be made thus avoiding costly factory down-time.
- Here are the dimensions of Taper Bushing with type 4040 (100.100)
- - Bore : we provide taper bushing with minimal bore 40 mm; for the max bore you can look at the number writen after "BC" in every product name.
- for example, BC100100F100 (4040X100MM), so the max bore is 100 mm.
- - Width : the numbers writen in every product name before "F" is width size.
- for example, BC100100F100 (4040X100MM), so the width is 100 mm.
- - Bore size : look at the last number in every product name.
- for example, BC100100F100, so the bore size is 100.
[Please login to see price]
Ask Quote
Call us
SIT
- Type of belt : S 8 M
- Pitch : 8 mm
- Pitch diameter : 212.53 mm
- Outside diameter + flange : -
- Teeth : 84
- Belt width : refer to the last number in product name (for example, ST80-ST80-S8M20, so, the belt width is 20mm)
- Type of pulley : 9
- Material : Cast iron
- Flange : Without flanges
[Please login to see price]
Ask Quote
Call us
SIT
- SIT-LOCK® locking assembly unit consists of four pieces with two inside double-one rings joined through a set of tightening screws. It is recomended for medium torques. Although it is not self centering, it can be easily assembled and diassembled.
- Here are the dimensions of product :
- Inner Diameter : refer to numbers writen after "F" in every product name. For example, CAL1F20/47; so, the inner diameter is 20 mm.
- Outside Diameter : refer to the last number in every product name. For example, CAL1F20/47; so, the outside diameter is 47 mm.
- High : 20 mm
- Screws : 12
- Type of Screws : M6
[Please login to see price]
Ask Quote
Call us
SIT
- Locking assembly with single taper design. Provides good concentricity and is self centering.
- SITLOCK® 6 is suitable for applications with medium torques.
- For the dimension of the product, please download the catalog in the document section.
[Please login to see price]
Ask Quote
Call us
.png)
SIT
- SIT-LOCK® 13 is very close to the standard type SIT-LOCK® 9, but it is manufactured in a longer execution. It is made of two tapered rings and locking nut.
- For the dimension of the product, please download the catalog in the document section
[Please login to see price]
Ask Quote
Call us
Call us
Call us
Call us
Call us
Call us
Call us
