All Products 20212
Call us
Call us
Call us
Call us
Call us
SIT
- HTD pulleys have a different design from the traditional toothed pulleys. The axial grooves are designed to allow the beltteeth to catch the pulley teeth with negligible triction. HTD Pulleys are available with full hub and for assembly with SER-SIT taper bushing.
- Product detail :
- Type of belt : 14 M
- Pitch : 14 mm
- Pitch diameter : 193.28 mm
- Outside diameter + flange : 209 mm
- Teeth : 44
- Type of bush : 3020
- Belt width : 85 mm
- Type of pulley :2
- Material : Cast iron
- Flange : With flanges
[Please login to see price]
Ask Quote
Call us
Call us
Call us
Call us
Call us
SIT
- SITEX® gear couplings consist of two toothed hubs which are connected with one internally toothed sleeve. The hubs are made of steel and the teeth, which are both profiled and section crowned, are obtained from milling. The sleeve is manufactured from stabilized 6.6 superpolymade resin.
- Here are the dimensions of product :
- Outside diameter of sleeve : : 142 mm
- Outside diameter of the hub : 96 mm
- Total length : 144 mm
- Length of sleeve : 73 mm
[Please login to see price]
Ask Quote
Call us
Call us
SIT
- SIT EXCELITE® ES - Narrow V-Belts are manufactured in accordance with ISO 4184 -and DIN 7753.
- Our high performance narrow v-belts have been specially designed for heavy-duty applications to deliver up to 50% more power than classical v-belts. Can be used in a wide range of industrial and agricultural fields such as compressor, fans, pumps and the other heavy-duty equipment.
- Here are the product dimension :
- - Belt width : 16 mm
- - High belt : 13 mm
- - Inside length : refer to the last number in every product names, for example : CLSPB1175, so the inside length is 1175 mm.
[Please login to see price]
Ask Quote
Call us
SIT
- SIT TAPER LOCK BUSHING is designed to give the following:
- 1. Perfect assembly
- 2. rapid dismantling of the pulley and other transmission equipment
- 3. No special tools requirement except hexagonal key
- The large range of finished bores available ensures that an immediate assembly can be made thus avoiding costly factory down-time.
- Here are the dimensions of Taper Bushing with type 2517 (65.45)
- - Bore : we provide taper bushing with minimal bore 16 mm and 3/4 inches; for the max bore you can look at the number writen after "BC" in every product name.
- for example, BC6545F16 (2517X16MM), so the max bore is 65 mm.
- - Width : the numbers writen in every product name before "F" is width size.
- for example, BC6545F16 (2517X16MM), so the width is 45 mm.
- - Bore size : look at the last number in every product name.
- for example, BC6545F16, so the bore size is 16.
[Please login to see price]
Ask Quote
Call us
STARKZ
Our pulleys can be used for application with a speed up to 35m/s. The pulley dimensions are very accurate as they are manufactured only by means of CNC or automatic lathes. For higher speed is strongly recomended to use steel as material of construction.
Our PBT pulleys are statically balanced according to ISO.
The PT pulleys are not balanced, as they do not have a finished bores.
[Please login to see price]
Ask Quote
Call us
SIT
- SIT EXCELITE® ES - Narrow V-Belts are manufactured in accordance with ISO 4184 -and DIN 7753.
- Our high performance narrow v-belts have been specially designed for heavy-duty applications to deliver up to 50% more power than classical v-belts. Can be used in a wide range of industrial and agricultural fields such as compressor, fans, pumps and the other heavy-duty equipment.
- Here are the product dimension :
- - Belt width : 16 mm
- - High belt : 13 mm
- - Inside length : refer to the last number in every product names, for example : CLSPB1175, so the inside length is 1175 mm.
[Please login to see price]
Ask Quote
Call us
SIT
- Type of belt : H
- Pitch : 12700 mm
- Pitch diameter : 338.20 mm
- Outside diameter + flange: -
- Teeth : 84
- Type of bush : 2517; max bore : 65 mm
- Belt width : 2.00 inch
- Type of pulley : 15
- Material : Cast iron
- Flange : Without flanges
[Please login to see price]
Ask Quote
Call us
Call us
Call us
Call us
Call us
.png)
SIT
- Taper Bush : 2012
- Shaft Diameter Range : 15 - 50 mm
- Pitch Diameter : 132 mm
- Outside Diameter : 136 mm
- Groove : 3
[Please login to see price]
Ask Quote
Call us
STARKZ
Our pulleys can be used for application with a speed up to 35m/s. The pulley dimensions are very accurate as they are manufactured only by means of CNC or automatic lathes. For higher speed is strongly recomended to use steel as material of construction.
Our PBT pulleys are statically balanced according to ISO.
The PT pulleys are not balanced, as they do not have a finished bores.
[Please login to see price]
Ask Quote
Call us
.png)
DIAMOND
Diamond Chain British Standard Series Chains are manufactured to International Standards Organization metric dimensions (IS 606, BS228, DIN 8187) for dimensions, interoperability, and sprocket fit
[Please login to see price]
Ask Quote
Call us
.png)
SIT
- Our pulleys can be used for application with a speed up to 35m/s. The pulley dimensions are very accurate as they are manufactured only by means of CNC or automatic lathes.
- For higher speed is strongly recomended to use steel as material of construction. Our PBT pulleys are satically balanced according to ISO.
- The PT pulleys are not balanced, as they do not have a finished bores.
- Here are the dimensions of "PBT" SPC with taper bush 5050 :
- - Belt type : SPC
- - Taperbush : 5050
- - Shaft diameter range : 70 - 125 mm
- - Pitch diameter : refer to numbers writen after "PBT" in every product name.
- For example, product name : PBT1000SPC3 (5050); so, the pitch diameter is 1000 mm
- - Outside diameter : you can add the pitch diameter with 9.6 to know the length of outside diameter.
- For example, the product is PBT1000SPC3 (5050); so the outside diameter is 1000 + 9.6 = 1009.6 mm
- - Groove : refer to the last number in every product name.
- For example for PBT1000SPC3; so, the groove is 3
- See recomendation taperbush below.
[Please login to see price]
Ask Quote
