• Type of belt : AT10
• Pitch : 10 mm
• Pitch diameter : 125. 45 mm
• Outside diameter + flange: 129 mm
• Teeth : 40
• Belt width : 32 mm
• Type of pulley : 4
• Material : Aluminium

PBT Pulleys - for mounting taper bushing SER-SIT

Material: cast iron DIN 1691 GG-20/GG25

Finishing: protective surface treatment.

V-groove pulleys suitable for use with the following belts:

-SPZ-Z-3V

-SPA-A

-SPB-B-5V

-SPC-C

• The CLASSICA® synchronous belt, being designed with imperial pitch, is a valid and economical altenative solution in low/medium torque transmission systems. 
•  
• Reduced elongation, no need of lubrication and low wearing makes this belt an economic and reliable option. 
•  
• How to measure the size of a product : 
• For example, CD210L075
• - 210 = pitch length x 10 (inches) 
• - L = pitch 
• - 75 = belt width x 100 (inches) 

No description for this product yet.

No description for this product yet.

No description for this product yet.

No description for this product yet.

• Locking assembly with single taper design. It is suitable for high torques. Provide good concentricity and self centring. 
•  
• For the dimension of the product, please download the catalog in the document section.

No description for this product yet.

• Type of belt : H
• Pitch : 12,700 mm
• Pitch diameter : 127.99 mm
• Outside diameter + flange: 137 mm 
• Teeth : 32
• Belt width : 2.00 inch
• Type of pulley : 1
• Material : Cast iron
• Flange : With flanges

• Type of belt : H
• Pitch : 12,700 mm
• Pitch diameter : 140.12 mm
• Outside diameter + flange: 145 mm 
• Teeth : 35
• Belt width : 2.00 inch
• Type of pulley : 2
• Material : Cast iron
• Flange : With flanges

No description for this product yet.

• Type of belt : H
• Pitch : 12,700 mm
• Pitch diameter : 176.50 mm
• Outside diameter + flange: 191 mm 
• Teeth : 44
• Belt width : 2.00 inch
• Type of pulley : 2
• Material : Cast iron
• Flange : With flanges

• Our pulleys can be used for application with a speed up to 35m/s. The pulley dimensions are very accurate as they are manufactured only by means of CNC or automatic lathes. 
•  
• For higher speed is strongly recomended to use steel as material of construction. Our PBT pulleys are satically balanced according to ISO. 
•  
• The PT pulleys are not balanced, as they do not have a finished bores.
•  
• Here are the dimensions of "PBT" SPA with taper bush 1610 :
• - Belt type : SPA
• - Taperbush : 1610
• - Shaft diameter range : 12 - 42 mm
• - Pitch diameter : refer to numbers writen after "PBT" in every product name. 
• For example, product name : PBT095SPA2 (1610); so, the pitch diameter is 95 mm
• - Outside diameter : you can add the pitch diameter with 5.6 to know the length of outside diameter. 
• For example, the product is PBT095SPA2 (1610); so the outside diameter is 95 + 5.6 = 100.6 mm
• - Groove : refer to the last number in every product name. 
• For example for PBT095SPA2; so, the groove is 2 
•  
• See recomendation taperbush below.

• Taper Bush : 3020
• Shaft Diameter Range : 25 - 75 mm
• Pitch Diameter : 265 mm
• Outside Diameter : 274.6 mm
• Groove : 3

• Our pulleys can be used for application with a speed up to 35m/s. The pulley dimensions are very accurate as they are manufactured only by means of CNC or automatic lathes. 
•  
• For higher speed is strongly recomended to use steel as material of construction. Our PBT pulleys are satically balanced according to ISO. 
•  
• The PT pulleys are not balanced, as they do not have a finished bores.
•  
• Here are the dimensions of "PBT" SPA with taper bush 2012 :
• - Belt type : SPA
• - Taperbush : 2012
• - Shaft diameter range : 15 - 50 mm
• - Pitch diameter : refer to numbers writen after "PBT" in every product name. 
• For example, product name : PBT106SPA4 (2012); so, the pitch diameter is 106 mm
• - Outside diameter : you can add the pitch diameter with 5.6 to know the length of outside diameter. 
• For example, the product is PBT106SPA4 (2012); so the outside diameter is 106 + 5.6 = 111.6 mm
• - Groove : refer to the last number in every product name. 
• For example for PBT106SPA4; so, the groove is 4 
•  
• See recomendation taperbush below.

• Type of belt : H
• Pitch : 12700 mm
• Pitch diameter : 338.20 mm
• Outside diameter + flange: -
• Teeth : 84
• Belt width : 2.00 inch
• Type of pulley : 5
• Material : Cast iron
• Flange : Without flanges

• SIT TAPER LOCK BUSHING is designed to give the following:
• 1. Perfect assembly
• 2. rapid dismantling of the pulley and other transmission equipment
• 3. No special tools requirement except hexagonal key
•  
• The large range of finished bores available ensures that an immediate assembly can be made thus avoiding costly factory down-time.
•  
• Here are the dimensions of Taper Bushing with type 4040 (100.100)
• - Bore : we provide taper bushing with minimal bore 40 mm; for the max bore you can look at the number writen after "BC" in every product name. 
• for example, BC100100F100 (4040X100MM), so the max bore is 100 mm.
• - Width : the numbers writen in every product name before "F" is width size.
• for example, BC100100F100 (4040X100MM), so the width is 100 mm.
• - Bore size : look at the last number in every product name. 
• for example, BC100100F100, so the bore size is 100.