Taper Bush : 3535

Shaft Diameter Range : 45 - 90 mm

Pitch Diameter : 355 mm

Outside Diameter : 362 mm

Groove : 8

No description for this product yet.

• Type of belt : H
• Pitch : 12.700 mm
• Pitch diameter : 83.52mm
• Outside diameter + flange : 94 mm
• Teeth : 21
• Type of bush : 1210; max bore : 32 mm
• Belt width : 1.00 inch
• Type of pulley : 4
• Material : Cast iron
• Flange : With flange 

No description for this product yet.

• Taper Bush : 2012
• Shaft Diameter Range : 15 - 50 mm
• Pitch Diameter : 250 mm
• Outside Diameter : 254 mm
• Groove : 1

• METALDRIVE® couplings are fully made of steel and are used in all applications where high reliablity, precision, and no maintenance are required.
•  
• METALDRIVE® GMD typw "S" are standard version with single disc pack. The couplings allows axial and angular misalignment. No radial misalignment is allowed. 
•  
• Here are the dimension of the product :
• Outside diameter : 206 mm 
• Inner diameter : 90 mm 
• Length : 175 mm 
• Screw : 6 
• Type of screw : M12

• Type of belt : L
• Pitch : 9525 mm
• Pitch diameter : 253.92 mm
• Outside diameter + flange: -
• Teeth : 84
• Belt width : 1.00 inch
• Type of pulley : 3
• Material : Cast iron
• Flange : Without flanges

• TORQUE-FLEX® - Narrow "XP" high performance belts are manufactured in accordance with European standards ISO 4184, DIN 7753 and are approved by API (American Petroleum Institute). 
•  
• The belt structure guarantees high transmittable power while the moulded cog profile provides higher flexibility with small diameters pulleys. 
•  
• Here are the product dimension : 
• - Section : XPA
• - Belt width : 13 mm 
• - High belt : 10 mm
• - Datum length : refer to the last number in every product names, for example : CSXPA1000, so the inside length is 1000 mm, 

No description for this product yet.

• Taper Bush : 3535
• Shaft Diameter Range : 45 - 90 mm
• Pitch Diameter : 450 mm
• Outside Diameter : 457 mm
• Groove : 5

No description for this product yet.

No description for this product yet.

• SIT-LOCK® locking assembly unit consists of four pieces with two inside double-one rings joined through a set of tightening screws. It is recomended for medium torques. Although it is not self centering, it can be easily assembled and diassembled.
•  
• Here are the dimensions of product :
• Inner Diameter : refer to numbers writen after "F" in every product name. For example, CAL1F20/47; so, the inner diameter is 20 mm. 
• Outside Diameter : refer to the last number in every product name. For example, CAL1F20/47; so, the outside diameter is 47 mm. 
• High : 24 mm
• Screws : 12
• Type of Screws : M8

No description for this product yet.

No description for this product yet.

No description for this product yet.

• Locking assembly with single taper design. Consists of two tapered rings and a spacer. It has minimum overall dimensions in virtue of the reduced thickness of the cones.
• SIT-LOCK® 3 is suitable for the applications where small hubs are requested. It is recommended for mid-high torques and is self centering. 
•  
• For the dimension of the product, please download the catalog in the document section

• Type of belt : AT10
• Pitch : 10 mm
• Pitch diameter : 49.05 mm
• Outside diameter + flange: 55 mm
• Teeth : 16
• Belt width : 25 mm
• Type of pulley : 2
• Material : Aluminium

No description for this product yet.

• High speed precision joints with needle roller bearings series "H"(DIN 808) 
• - Roller bearings lubricated for life. No maintenance required.
• - Precise and versatile, silent and smooth running; wide application field.
• - Max. angel : 45° type "H",90° type "HD", max. speed 4.000 rpm.
• - Special executions upon request. 
•  
• Here are the dimension of product : 
• Outside diameter : 70 mm
• Inner diameter :  35 mm
• Length of half joint : 70 mm
• Full length : 140 mm

• SIT TAPER LOCK BUSHING is designed to give the following:
• 1. Perfect assembly
• 2. rapid dismantling of the pulley and other transmission equipment
• 3. No special tools requirement except hexagonal key
•  
• The large range of finished bores available ensures that an immediate assembly can be made thus avoiding costly factory down-time.
•  
•  
• Here are the dimensions of Taper Bushing with type 1210 (30.25)
• - Bore : we provide taper bushing with minimal bore 12 mm and 5/8 inches; for the max bore you can look at the number writen after "BC" in every product name. 
• for example, BC3025F12 (1210X12MM), so the max bore is 30 mm.
• - Width : the numbers writen in every product name before "F" is width size.
• for example, BC3025F12 (1210X12MM), so the width is 25 mm.
• - Bore size : look at the last number in every product name. 
• for example, BC3025F12, so the bore size is 12.

• HTD pulleys have a different design from the traditional toothed pulleys. The axial grooves are designed to allow the beltteeth to catch the pulley teeth with negligible triction. HTD Pulleys are available with full hub and for assembly with SER-SIT taper bushing.
•  
•  
• Product detail : 
•  
• Type of belt : 14 M 
• Pitch :  14  mm
• Pitch diameter : 193.28 mm
• Outside diameter + flange : 209 mm
• Teeth : 44
• Type of bush : 3030
• Belt width : 115 mm
• Type of pulley :2
• Material : Cast iron
• Flange : With flanges 

No description for this product yet.

• Taper Bush : 3030 
• Shaft Diameter Range : 45 - 90 mm
• Pitch Diameter : 630 mm
• Outside Diameter : 637 mm
• Groove : 2