No description for this product yet.

No description for this product yet.

• Taper Bush : 4040
• Shaft Diameter Range : 55 - 100 mm
• Pitch Diameter : 630 mm
• Outside Diameter : 637 mm
• Groove : 5

• Taper Bush : 4040
• Shaft Diameter Range : 55 - 100 mm
• Pitch Diameter : 630 mm
• Outside Diameter : 637 mm
• Groove : 6

No description for this product yet.

No description for this product yet.

• SIT TAPER LOCK BUSHING is designed to give the following:
• 1. Perfect assembly
• 2. rapid dismantling of the pulley and other transmission equipment
• 3. No special tools requirement except hexagonal key
•  
• The large range of finished bores available ensures that an immediate assembly can be made thus avoiding costly factory down-time.
•  
•  
• Here are the dimensions of Taper Bushing with type 3039 (75.75)
•  
• - Bore : we provide taper bushing with minimal bore 25 mm and 1-1/4 inches; for the max bore you can look at the number writen after "BC" in every product name. 
• for example, BC7575F25 (3030X25MM), so the max bore is 75 mm.
• - Width : the numbers writen in every product name before "F" is width size.
• for example,BC7575F25 (3030X25MM), so the width is 75 mm.
• - Bore size : look at the last number in every product name. 
• for example, BC7575F25, so the bore size is 25.

• SIT TAPER LOCK BUSHING is designed to give the following:
• 1. Perfect assembly
• 2. rapid dismantling of the pulley and other transmission equipment
• 3. No special tools requirement except hexagonal key
•  
• The large range of finished bores available ensures that an immediate assembly can be made thus avoiding costly factory down-time.
•  
•  
• Here are the dimensions of Taper Bushing with type 1215 (30.40)
• - Bore : we provide taper bushing with minimal bore 11 mm and 1 inches; for the max bore you can look at the number writen after "BC" in every product name. 
• for example, BC3040F11 (1215X11MM), so the max bore is 30 mm.
• - Width : the numbers writen in every product name before "F" is width size.
• for example, BC3040F11 (1215X11MM), so the width is 40 mm.
• - Bore size : look at the last number in every product name. 
• for example, BC3040F11, so the bore size is 11.

PBT Pulleys - for mounting taper bushing SER-SIT

Material: cast iron DIN 1691 GG-20/GG25

Finishing: protective surface treatment.

V-groove pulleys suitable for use with the following belts:

-SPZ-Z-3V

-SPA-A

-SPB-B-5V

-SPC-C

• Taper Bush : 3535
• Shaft Diameter Range : 45 - 90 mm
• Pitch Diameter : 800 mm
• Outside Diameter : 807 mm
• Groove : 3

• Taper Bush : 4040
• Shaft Diameter Range : 55 - 100 mm
• Pitch Diameter : 800 mm
• Outside Diameter : 807 mm
• Groove : 4

No description for this product yet.

No description for this product yet.

No description for this product yet.

No description for this product yet.

• Type of belt : AT10
• Pitch : 10 mm
• Pitch diameter : 125. 45 mm
• Outside diameter + flange: 129 mm
• Teeth : 40
• Belt width : 32 mm
• Type of pulley : 4
• Material : Aluminium

• The CLASSICA® synchronous belt, being designed with imperial pitch, is a valid and economical altenative solution in low/medium torque transmission systems. 
•  
• Reduced elongation, no need of lubrication and low wearing makes this belt an economic and reliable option. 
•  
• How to measure the size of a product : 
• For example, CD210L075
• - 210 = pitch length x 10 (inches) 
• - L = pitch 
• - 75 = belt width x 100 (inches) 

No description for this product yet.

No description for this product yet.

• Locking assembly with single taper design. It is suitable for high torques. Provide good concentricity and self centring. 
•  
• For the dimension of the product, please download the catalog in the document section.

No description for this product yet.