All Products 20194
- Type of belt : H
- Pitch : 12700mm
- Pitch diameter : 127.99 mm
- Outside diameter + flange: 137 mm
- Teeth : 32
- Type of bush : 1610; max bore : 42 mm
- Belt width : 1.50 inch
- Type of pulley : 8
- Material : Cast iron
- Flange : With flanges
Dimensions in milimeters:
Keyways are British Standard Metric B S 4235. Part 1: 1972 DIN 6885 and conform to ISO recomendations with the exception of those marked, which are shallower. Where a key is to be used it should be parallel and side fitting, with top clearance. Depth of keyway is measured at the CENTRE
.png)
- Our pulleys can be used for application with a speed up to 35m/s. The pulley dimensions are very accurate as they are manufactured only by means of CNC or automatic lathes.
- For higher speed is strongly recomended to use steel as material of construction. Our PBT pulleys are satically balanced according to ISO.
- The PT pulleys are not balanced, as they do not have a finished bores.
- Here are the dimensions of "PBT" SPB with taper bush 1210 :
- - Belt type : SPB
- - Taperbush : 1210
- - Shaft diameter range : 15 - 50 mm
- - Pitch diameter : refer to numbers writen after "PBT" in every product name.
- For example, product name : PBT090SPB1 (1210); so, the pitch diameter is 90 mm
- - Outside diameter : you can add the pitch diameter with 7 to know the length of outside diameter.
- For example, the product is PBT090SPB1 (1210); so the outside diameter is 90 + 7 = 97 mm
- - Groove : refer to the last number in every product name.
- For example for PBT090SPB1; so, the groove is 1
- See recomendation taperbush below.
- Type of belt : H
- Pitch : 12.700 mm
- Pitch diameter : 79.48 mm
- Outside diameter + flange: 88 mm
- Teeth : 20
- Type of bush : 1610; max bore : 42 mm
- Belt width : 2.00 inch
- Type of pulley : 4
- Material : Cast iron
- Flange : With flange
Dimensions in milimeters:
Keyways are British Standard Metric B S 4235. Part 1: 1972 DIN 6885 and conform to ISO recomendations with the exception of those marked, which are shallower. Where a key is to be used it should be parallel and side fitting, with top clearance. Depth of keyway is measured at the CENTRE
.png)
- Type of belt : T5
- Pitch : 5 mm
- Pitch diameter : 40.60 mm
- Outside diameter + flange: 46 mm
- Teeth : 26
- Belt width : 10 mm
- Type of pulley : 2
- Material : Aluminium
%20(1).png)
- Taper Bush : 5050
- Shaft Diameter Range : 70 - 125 mm
- Pitch Diameter : 710 mm
- Outside Diameter : 719.6 mm
- Groove : 6
Dimensions in milimeters:
Keyways are British Standard Metric B S 4235. Part 1: 1972 DIN 6885 and conform to ISO recomendations with the exception of those marked, which are shallower. Where a key is to be used it should be parallel and side fitting, with top clearance. Depth of keyway is measured at the CENTRE
Idler Sprockets : Ball bearing idler sprocket have sealed ball bearing with extended inner race and setscrews for securing to shaft.
Ready Sprockets : An assortment of sprockets and hubs drilled and tapped for simple, convertient assembly with standard hex head cap screws.
Finished Bore Sprockets : No. 35 through No. 80 with standard keyway and setscrew. Many sizes stocked both with and without induction hardened teeth.
- Type of belt : H
- Pitch : 12700 mm
- Pitch diameter : 160.33 mm
- Outside diameter + flange: 168 mm
- Teeth : 40
- Type of bush : 2012; max bore : 50 mm
- Belt width : 2.00 inch
- Type of pulley : 8
- Material : Cast iron
- Flange : With flanges
- Type of belt : H
- Pitch : 12700 mm
- Pitch diameter : 192.67 mm
- Outside diameter + flange: 199 mm
- Teeth : 48
- Type of bush : 2517; max bore : 65 mm
- Belt width : 2.00inch
- Type of pulley : 8
- Material : Cast iron
- Flange : With flanges
Dimensions in milimeters:
Keyways are British Standard Metric B S 4235. Part 1: 1972 DIN 6885 and conform to ISO recomendations with the exception of those marked, which are shallower. Where a key is to be used it should be parallel and side fitting, with top clearance. Depth of keyway is measured at the CENTRE
.png)
- Taper Bush : 2517
- Shaft Diameter Range : 18 - 65 mm
- Pitch Diameter : 280 mm
- Outside Diameter : 285.6 mm
- Groove : 3
- Type of belt : T5
- Pitch : 5 mm
- Pitch diameter : 62.85 mm
- Outside diameter + flange: 67 mm
- Teeth : 40
- Belt width : 16 mm
- Type of pulley : 2
- Material : Aluminium
Sprocket for chain according to DIN 8187 - ISO/R 606
De : External Diameter mm
Dp : Pitch Diameter mm
Dm : Hub Diameter mm
W : Weight kg
