• Type of belt : H
• Pitch : 12700 mm
• Pitch diameter : 176.50 mm
• Outside diameter + flange: 191 mm
• Teeth : 44
• Type of bush : 2012; max bore : 50 mm
• Belt width : 1.50 inch
• Type of pulley : 8
• Material : Cast iron
• Flange : With flanges

No description for this product yet.

No description for this product yet.

No description for this product yet.

• Inner Diameter : 95 mm
• Outside Diameter : 135 mm
• High : 40 mm
• Screws : 10
• Type of Screws : M10

No description for this product yet.

• Type of belt : AT10
• Pitch : 10 mm
• Pitch diameter : 150.95 mm
• Outside diameter + flange: -
• Teeth : 48
• Belt width : 32 mm
• Type of pulley : 5
• Material : Aluminium

• Our pulleys can be used for application with a speed up to 35m/s. The pulley dimensions are very accurate as they are manufactured only by means of CNC or automatic lathes. 
•  
• For higher speed is strongly recomended to use steel as material of construction. Our PBT pulleys are satically balanced according to ISO. 
•  
• The PT pulleys are not balanced, as they do not have a finished bores.
•  
• Here are the dimensions of "PBT" SPZ with taper bush 1610 :
• - Belt type : SPZ
• - Taperbush : 1610
• - Shaft diameter range : 12 - 42 mm
• - Pitch diameter : refer to numbers writen after "PBT" in every product name. 
• For example, product name : PBT085SPZ2 (1610); so, the pitch diameter is 85 mm
• - Outside diameter : you can add the pitch diameter with 4 to know the length of outside diameter. 
• For example, the product is PBT085SPZ2 (1610); so the outside diameter is 85 + 4 = 89 mm
• - Groove : refer to the last number in every product name. 
• For example for PBT085SPZ2; so, the groove is 2 
•  
• See recomendation taperbush below.

• TORQUE-FLEX® - Narrow "XP" high performance belts are manufactured in accordance with European standards ISO 4184, DIN 7753 and are approved by API (American Petroleum Institute). 
•  
• The belt structure guarantees high transmittable power while the moulded cog profile provides higher flexibility with small diameters pulleys. 
•  
• Here are the product dimension : 
• - Section : XPA
• - Belt width : 13 mm 
• - High belt : 10 mm
• - Datum length : refer to the last number in every product names, for example : CSXPA1000, so the inside length is 1000 mm, 

• Type of belt : H
• Pitch : 12700 mm
• Pitch diameter : 107.78 mm
• Outside diameter + flange: 113 mm 
• Teeth : 27
• Belt width : 2.00 inch
• Type of pulley : 1
• Material : Cast iron
• Flange : With flanges

No description for this product yet.

• SIT EXCELITE® ES - Narrow V-Belts are manufactured in accordance with ISO 4184 -and DIN 7753.
•  
• Our high performance narrow v-belts have been specially designed for heavy-duty applications to deliver up to 50% more power than classical v-belts. Can be used in a wide range of industrial and agricultural fields such as compressor, fans, pumps and the other heavy-duty equipment.
•  
• Here are the product dimension : 
• - Belt width : 16 mm 
• - High belt : 13 mm
• - Inside length : refer to the last number in every product names, for example : CLSPB1175, so the inside length is 1175 mm. 

• Type of belt : AT10
• Pitch : 10 mm
• Pitch diameter : 100.00 mm
• Outside diameter + flange: 108 mm
• Teeth : 32
• Belt width : 50 mm
• Type of pulley : 2
• Material : Aluminium

• SIT TAPER LOCK BUSHING is designed to give the following:
• 1. Perfect assembly
• 2. rapid dismantling of the pulley and other transmission equipment
• 3. No special tools requirement except hexagonal key
•  
• The large range of finished bores available ensures that an immediate assembly can be made thus avoiding costly factory down-time.
•  
• Here are the dimensions of Taper Bushing with type 4040 (100.100)
• - Bore : we provide taper bushing with minimal bore 40 mm; for the max bore you can look at the number writen after "BC" in every product name. 
• for example, BC100100F100 (4040X100MM), so the max bore is 100 mm.
• - Width : the numbers writen in every product name before "F" is width size.
• for example, BC100100F100 (4040X100MM), so the width is 100 mm.
• - Bore size : look at the last number in every product name. 
• for example, BC100100F100, so the bore size is 100.

• Our pulleys can be used for application with a speed up to 35m/s. The pulley dimensions are very accurate as they are manufactured only by means of CNC or automatic lathes. 
•  
• For higher speed is strongly recomended to use steel as material of construction. Our PBT pulleys are satically balanced according to ISO. 
•  
• The PT pulleys are not balanced, as they do not have a finished bores.
•  
• Here are the dimensions of "PBT" SPZ with taper bush 2012 :
• - Belt type : SPZ
• - Taperbush : 2012
• - Shaft diameter range : 15 - 50 mm
• - Pitch diameter : refer to numbers writen after "PBT" in every product name. 
• For example, product name : PBT100SPZ5 (2012); so, the pitch diameter is 100 mm
• - Outside diameter : you can add the pitch diameter with 4 to know the length of outside diameter. 
• For example, the product is PBT100SPZ5 (2012); so the outside diameter is 100 + 4 = 104 mm
• - Groove : refer to the last number in every product name. 
• For example for PBT100SPZ5; so, the groove is 5
•  
• See recomendation taperbush below.

No description for this product yet.

No description for this product yet.