All Products 20194
- Taper Bush : 1610
- Shaft Diameter Range : 12 - 42 mm
- Pitch Diameter : 112 mm
- Outside Diameter : 117.6 mm
- Groove : 2
Sprocket for chain according to DIN 8187 - ISO/R 606
De : External Diameter mm
Dp : Pitch Diameter mm
Dm : Hub Diameter mm
W : Weight kg
.png)
- Taper Bush : 2012
- Shaft Diameter Range : 15 - 50 mm
- Pitch Diameter : 132 mm
- Outside Diameter : 137.6 mm
- Groove : 2
.png)
- Taper Bush : 2012
- Shaft Diameter Range : 15 - 50 mm
- Pitch Diameter : 140 mm
- Outside Diameter : 144 mm
- Groove : 3
.png)
- Taper Bush : 2012
- Shaft Diameter Range : 15 - 50 mm
- Pitch Diameter : 150 mm
- Outside Diameter : 154 mm
- Groove : 2
.png)
- Taper Bush : 2517
- Shaft Diameter Range : 18 - 65 mm
- Pitch Diameter : 140 mm
- Outside Diameter : 145.6 mm
- Groove : 3
.png)
PBT Pulleys - for mounting taper bushing SER-SIT
Material: cast iron DIN 1691 GG-20/GG25
Finishing: protective surface treatment.
V-groove pulleys suitable for use with the following belts:
-SPZ-Z-3V
-SPA-A
-SPB-B-5V
-SPC-C
- Type of belt : H
- Pitch : 12.700 mm
- Pitch diameter : 71.40 mm
- Outside diameter + flange: 80 mm
- Teeth : 18
- Type of bush : 1210; max bore : 32 mm
- Belt width : 1.00 inch
- Type of pulley : 4
- Material : Cast iron
- Flange : With flange
- Type of belt : H
- Pitch : 12.700 mm
- Pitch diameter : 79.48 mm
- Outside diameter + flange: 88 mm
- Teeth : 20
- Type of bush : 1210; max bore : 32 mm
- Belt width : 1.00 inch
- Type of pulley : 4
- Material : Cast iron
- Flange : With flange
Sprocket for chain according to DIN 8187 - ISO/R 606
De : External Diameter mm
Dp : Pitch Diameter mm
Dm : Hub Diameter mm
W : Weight kg
.png)
PBT Pulleys - for mounting taper bushing SER-SIT
Material: cast iron DIN 1691 GG-20/GG25
Finishing: protective surface treatment.
V-groove pulleys suitable for use with the following belts:
-SPZ-Z-3V
-SPA-A
-SPB-B-5V
-SPC-C
- SIT-LOCK® locking assembly unit consists of four pieces with two inside double-one rings joined through a set of tightening screws. It is recomended for medium torques. Although it is not self centering, it can be easily assembled and diassembled.
- Here are the dimensions of product :
- Inner Diameter : refer to numbers writen after "F" in every product name. For example, CAL1F20/47; so, the inner diameter is 20 mm.
- Outside Diameter : refer to the last number in every product name. For example, CAL1F20/47; so, the outside diameter is 47 mm.
- High : 20 mm
- Screws : 14
- Type of Screws : M6
Idler Sprockets : Ball bearing idler sprocket have sealed ball bearing with extended inner race and setscrews for securing to shaft.
Ready Sprockets : An assortment of sprockets and hubs drilled and tapped for simple, convertient assembly with standard hex head cap screws.
Finished Bore Sprockets : No. 35 through No. 80 with standard keyway and setscrew. Many sizes stocked both with and without induction hardened teeth.
Dimensions in milimeters:
Keyways are British Standard Metric B S 4235. Part 1: 1972 DIN 6885 and conform to ISO recomendations with the exception of those marked, which are shallower. Where a key is to be used it should be parallel and side fitting, with top clearance. Depth of keyway is measured at the CENTRE
.jpg)
- Type of belt : T5
- Pitch : 5 mm
- Pitch diameter : 29.40 mm
- Outside diameter + flange: 33 mm
- Teeth : 19
- Belt width : 10 mm
- Type of pulley : 2
- Material : Aluminium
- The special OPTIGEAR profile allows very high torque transmission and the compensation of axal, angular and radial misalignment (only in the version with 2 hubs). The maximum recommended working temperature is -10 °C a + 80 °C.
- SITEX® ST type "C" are standard type with 2 hubs and one sleeve. Offers compact, powerful design, and easy assembly.
- Here are the dimension of product :
- Outside diameter of the hub : 55 mm
- Length of hub : 48.5 mm
- The special OPTIGEAR profile allows very high torque transmission and the compensation of axal, angular and radial misalignment (only in the version with 2 hubs). The maximum recommended working temperature is -10 °C a + 80 °C.
- SITEX® ST type "C" are standard type with 2 hubs and one sleeve. Offers compact, powerful design, and easy assembly.
- Here are the dimension of product :
- Outside diameter of the hub : 65 mm
- Length hub : 56 mm
- The special OPTIGEAR profile allows very high torque transmission and the compensation of axal, angular and radial misalignment (only in the version with 2 hubs). The maximum recommended working temperature is -10 °C a + 80 °C.
- SITEX® ST type "C" are standard type with 2 hubs and one sleeve. Offers compact, powerful design, and easy assembly.
- Here are the dimension of product :
- Outside diameter of the hub : 130 mm
- Length hub : 82.5 mm
- Taper Bush : 3020
- Shaft Diameter Range : 25 - 75 mm
- Pitch Diameter : 400 mm
- Outside Diameter : 405.6 mm
- Groove : 4
Sprocket for chain according to DIN 8187 - ISO/R 606
De : External Diameter mm
Dp : Pitch Diameter mm
Dm : Hub Diameter mm
W : Weight kg
