No description for this product yet.

No description for this product yet.

• Taper Bush : 2012
• Shaft Diameter Range : 15 - 50 mm
• Pitch Diameter : 132 mm
• Outside Diameter : 139 mm
• Groove : 3

• Taper Bush : 2012
• Shaft Diameter Range : 15 - 50 mm
• Pitch Diameter : 140 mm
• Outside Diameter : 147 mm
• Groove : 3

• SIT TAPER LOCK BUSHING is designed to give the following:
• 1. Perfect assembly
• 2. rapid dismantling of the pulley and other transmission equipment
• 3. No special tools requirement except hexagonal key
•  
• The large range of finished bores available ensures that an immediate assembly can be made thus avoiding costly factory down-time.
•  
• Here are the dimensions of Taper Bushing with type 1108 (28.20)
• - Bore : we provide taper bushing with minimal bore 9 mm and 3/8 inches; for the max bore you can look at the number writen after "BC" in every product name. 
• for example, BC2820F10 (1108X10MM), so the max bore is 28 mm.
• - Width : the numbers writen in every product name before "F" is width size.
• for example, BC2820F10 (1108X10MM), so the width is 20 mm.
• - Bore size : look at the last number in every product name. 
• for example, BC2820F10, so the bore size is 10.

• SIT TAPER LOCK BUSHING is designed to give the following:
• 1. Perfect assembly
• 2. rapid dismantling of the pulley and other transmission equipment
• 3. No special tools requirement except hexagonal key
•  
• The large range of finished bores available ensures that an immediate assembly can be made thus avoiding costly factory down-time.
•  
•  
• Here are the dimensions of Taper Bushing with type 1210 (30.25)
• - Bore : we provide taper bushing with minimal bore 12 mm and 5/8 inches; for the max bore you can look at the number writen after "BC" in every product name. 
• for example, BC3025F12 (1210X12MM), so the max bore is 30 mm.
• - Width : the numbers writen in every product name before "F" is width size.
• for example, BC3025F12 (1210X12MM), so the width is 25 mm.
• - Bore size : look at the last number in every product name. 
• for example, BC3025F12, so the bore size is 12.

• Type of belt : 8 M 
• Pitch :  8 mm
• Pitch diameter : 54.65  mm
• Outside diameter + flange : 62 mm
• Teeth : 22
• Type of bush : 1008
• Belt width : 30 mm
• Type of pulley :4
• Material : Cast iron
• Flange : With flanges 

Sprocket for chain according to DIN 8187 - ISO/R 606

D_e : External Diameter   mm

D_p : Pitch Diameter        mm

D_m : Hub Diameter        mm

W  :  Weight                  kg

• Type of belt : 8 M 
• Pitch : 8 mm
• Pitch diameter : 161.60 mm
• Outside diameter + flange : 168 mm
• Teeth : 64
• Belt width : 50 mm
• Type of pulley : 8
• Material : Cast iron
• Flange : With flanges 

No description for this product yet.

No description for this product yet.

No description for this product yet.

No description for this product yet.

No description for this product yet.

• SIT TAPER LOCK BUSHING is designed to give the following:
• 1. Perfect assembly
• 2. rapid dismantling of the pulley and other transmission equipment
• 3. No special tools requirement except hexagonal key
•  
• The large range of finished bores available ensures that an immediate assembly can be made thus avoiding costly factory down-time.
•  
•  
• Here are the dimensions of Taper Bushing with type 1610 (40.25)
• - Bore : we provide taper bushing with minimal bore 12 mm and 3/8 inches; for the max bore you can look at the number writen after "BC" in every product name. 
• for example, BC4025F12 (1610X12MM), so the max bore is 40 mm.
• - Width : the numbers writen in every product name before "F" is width size.
• for example, BC4025F12 (1610X12MM), so the width is 25 mm.
• - Bore size : look at the last number in every product name. 
• for example, BC4025F12, so the bore size is 12.

• TRASCO® couplings are dimensionally manufactured to hub types "A" and "B", the difference being the maximum shaft diameter which hubs can accpet (corresponding respectively to the first and second code number). The long hub execution "L" (allows full coverage of the motor shaft) is available in both "A" and "B" execution.
•  
• Product detail 
• Outside diameter : 95 mm
• Max bore : 55 mm
• Length : 246 mm 
• Material : Cast iron grade GG25 
•  
• Approved according to EC standard ATEX 94/9/EC

Sprocket for chain according to DIN 8187 - ISO/R 606

D_e : External Diameter   mm

D_p : Pitch Diameter        mm

D_m : Hub Diameter        mm

W  :  Weight                  kg

POWERLOCK locking assembly unit consists of four pieces with two inside double-one rings joined through a set of tightening screws. It is recomended for medium torques. Although it is not self centering, it can be easily assembled and diassembled.

No description for this product yet.

• SIT TAPER LOCK BUSHING is designed to give the following:
• 1. Perfect assembly
• 2. rapid dismantling of the pulley and other transmission equipment
• 3. No special tools requirement except hexagonal key
•  
• The large range of finished bores available ensures that an immediate assembly can be made thus avoiding costly factory down-time.
•  
•  
• Here are the dimensions of Taper Bushing with type 1615 (40.40)
• - Bore : we provide taper bushing with minimal bore 12 mm and 1/2 inches; for the max bore you can look at the number writen after "BC" in every product name. 
• for example, BC4040F12 (1615X12MM), so the max bore is 40 mm.
• - Width : the numbers writen in every product name before "F" is width size.
• for example, BC4040F12 (1615X12MM), so the width is 40 mm.
• - Bore size : look at the last number in every product name. 
• for example, BC4040F12, so the bore size is 12.

Sprocket for chain according to DIN 8187 - ISO/R 606

D_e : External Diameter   mm

D_p : Pitch Diameter        mm

D_m : Hub Diameter        mm

W  :  Weight                  kg

• TRASCO flexible couplings is the flexible and omocinetic coupling that assures the best performance in relation to the physical space occupied in its class. It has a very compact design and allows safe power transmision by absorbing peak loads and torsional vibrations.
•  
• Product detail 
• Outside diameter : 290 mm
• Max bore : 145 mm
• Material : Cast iron grade GG25 
•  
• Approved according to EC standard ATEX 94/9/EC

• TOP DRIVE® HTD belt is an evolution of standard positive drive belts. The tooth shape is the HTD profile according to ISO 13050.
•  
• This profile has been used for many years in a wide range of applications and it is well known for its outstanding performances. Power transmission is much higher compared to the classic inch trapezodial profile. 
•  
• The circular-arc tooth provides superior tooth jump resistance and provides a smooth tooth engagement. The noise level is remarkably reduced if compared to the classic trapezodial belts.
•  
• How to measure the size of a product : 
• For example, CHD1064-8M20 
• - 1640 = pitch length (mm)
• - 8M = pitch 
• - 20 = belt width (mm)

• SIT TAPER LOCK BUSHING is designed to give the following:
• 1. Perfect assembly
• 2. rapid dismantling of the pulley and other transmission equipment
• 3. No special tools requirement except hexagonal key
•  
• The large range of finished bores available ensures that an immediate assembly can be made thus avoiding costly factory down-time.
•  
•  
• Here are the dimensions of Taper Bushing with type 2012 (50.30)
• - Bore : we provide taper bushing with minimal bore 14 mm and 5/8 inches; for the max bore you can look at the number writen after "BC" in every product name. 
• for example, BC5030F14 (2012X14MM), so the max bore is 50 mm.
• - Width : the numbers writen in every product name before "F" is width size.
• for example, BC5030F14 (2012X14MM), so the width is 30 mm.
• - Bore size : look at the last number in every product name. 
• for example, BC5030F14, so the bore size is 14.