All Products 20194
- SIT TAPER LOCK BUSHING is designed to give the following:
- 1. Perfect assembly
- 2. rapid dismantling of the pulley and other transmission equipment
- 3. No special tools requirement except hexagonal key
- The large range of finished bores available ensures that an immediate assembly can be made thus avoiding costly factory down-time.
- Here are the dimensions of Taper Bushing with type 3535 (90.90)
- - Bore : we provide taper bushing with minimal bore 25 mm; for the max bore you can look at the number writen after "BC" in every product name.
- for example, BC9090F25 (3535X25MM) so the max bore is 90 mm.
- - Width : the numbers writen in every product name before "F" is width size.
- for example, BC9090F25 (3535X25MM), so the width is 90 mm.
- - Bore size : look at the last number in every product name.
- for example, BC9090F25, so the bore size is 25.
- Locking assembly with single taper design. It is suitable for high torques. Provide good concentricity and self centring.
- For the dimension of the product, please download the catalog in the document section.
Sprocket for chain according to DIN 8187 - ISO/R 606
De : External Diameter mm
Dp : Pitch Diameter mm
Dm : Hub Diameter mm
W : Weight kg
.png)
- Taper Bush : 2012
- Shaft Diameter Range : 15 - 50 mm
- Pitch Diameter : 140 mm
- Outside Diameter : 145.6 mm
- Groove : 2
Dimensions in milimeters:
Keyways are British Standard Metric B S 4235. Part 1: 1972 DIN 6885 and conform to ISO recomendations with the exception of those marked, which are shallower. Where a key is to be used it should be parallel and side fitting, with top clearance. Depth of keyway is measured at the CENTRE
.jpg)
- Type of belt : T5
- Pitch : 5 mm
- Pitch diameter : 39.00 mm
- Outside diameter + flange: 46 mm
- Teeth : 25
- Belt width : 10 mm
- Type of pulley : 2
- Material : Aluminium
Sprocket for chain according to DIN 8187 - ISO/R 606
De : External Diameter mm
Dp : Pitch Diameter mm
Dm : Hub Diameter mm
W : Weight kg
Sprocket for chain according to DIN 8187 - ISO/R 606
De : External Diameter mm
Dp : Pitch Diameter mm
Dm : Hub Diameter mm
W : Weight kg
Sprocket for chain according to DIN 8187 - ISO/R 606
De : External Diameter mm
Dp : Pitch Diameter mm
Dm : Hub Diameter mm
W : Weight kg
Sprocket for chain according to DIN 8187 - ISO/R 606
De : External Diameter mm
Dp : Pitch Diameter mm
Dm : Hub Diameter mm
W : Weight kg
- Type of belt : T10
- Pitch : 10 mm
- Pitch diameter : 150.95 mm
- Outside diameter + flange: -
- Teeth : 48
- Belt width : 25 mm
- Type of pulley : 5
- Material : Aluminium
Sprocket for chain according to DIN 8187 - ISO/R 606
De : External Diameter mm
Dp : Pitch Diameter mm
Dm : Hub Diameter mm
W : Weight kg
.png)
- Taper Bush : 2517
- Shaft Diameter Range : 18 - 65 mm
- Pitch Diameter : 190 mm
- Outside Diameter : 197 mm
- Groove : 3
Sprocket for chain according to DIN 8187 - ISO/R 606
De : External Diameter mm
Dp : Pitch Diameter mm
Dm : Hub Diameter mm
W : Weight kg
.jpg)
POWERLOCK locking assembly unit consists of four pieces with two inside double-one rings joined through a set of tightening screws. It is recomended for medium torques. Although it is not self centering, it can be easily assembled and diassembled.
- TRASCO flexible couplings is the flexible and omocinetic coupling that assures the best performance in relation to the physical space occupied in its class. It has a very compact design and allows safe power transmision by absorbing peak loads and torsional vibrations.
- Product detail
- Outside diameter : 65 mm
- Max bore : 38 mm
- Material : Cast iron grade GG25
- Approved according to EC standard ATEX 94/9/EC
.png)
- Taper Bush : 3535
- Shaft Diameter Range : 45 - 90 mm
- Pitch Diameter : 315 mm
- Outside Diameter : 322 mm
- Groove : 5
- SIT TAPER LOCK BUSHING is designed to give the following:
- 1. Perfect assembly
- 2. rapid dismantling of the pulley and other transmission equipment
- 3. No special tools requirement except hexagonal key
- The large range of finished bores available ensures that an immediate assembly can be made thus avoiding costly factory down-time.
- Here are the dimensions of Taper Bushing with type 2517 (65.45)
- - Bore : we provide taper bushing with minimal bore 16 mm and 3/4 inches; for the max bore you can look at the number writen after "BC" in every product name.
- for example, BC6545F16 (2517X16MM), so the max bore is 65 mm.
- - Width : the numbers writen in every product name before "F" is width size.
- for example, BC6545F16 (2517X16MM), so the width is 45 mm.
- - Bore size : look at the last number in every product name.
- for example, BC6545F16, so the bore size is 16.
- Of this series both single and double joints are available.Types E are with sliding bushes while type H has needle roller bearings.
- Joints with plain bearings are available in 2 versions :
- - Types E to DIN 808;
- - Type EB to DIN 808/7551
- Precision joint series "E" (DIN 808) wear resistant sliding bushes from cemented and hardened steel. Strong, precise, and versatile; wide application field.
- Here are the dimension of product :
- Outside diameter : 25 mm
- Inner diameter : 12 mm
- Length of half joint : 28 mm
- Full length : 56 mm
- Inner Diameter : 35 mm
- Outside Diameter : 60 mm
- High : 28 mm
- Screws : 8
- Type of Screws : M6
- SIT TAPER LOCK BUSHING is designed to give the following:
- 1. Perfect assembly
- 2. rapid dismantling of the pulley and other transmission equipment
- 3. No special tools requirement except hexagonal key
- The large range of finished bores available ensures that an immediate assembly can be made thus avoiding costly factory down-time.
- Here are the dimensions of Taper Bushing with type 3535 (90.90)
- - Bore : we provide taper bushing with minimal bore 25 mm; for the max bore you can look at the number writen after "BC" in every product name.
- for example, BC9090F25 (3535X25MM) so the max bore is 90 mm.
- - Width : the numbers writen in every product name before "F" is width size.
- for example, BC9090F25 (3535X25MM), so the width is 90 mm.
- - Bore size : look at the last number in every product name.
- for example, BC9090F25, so the bore size is 25.
