• SIT TAPER LOCK BUSHING is designed to give the following:
• 1. Perfect assembly
• 2. rapid dismantling of the pulley and other transmission equipment
• 3. No special tools requirement except hexagonal key
•  
• The large range of finished bores available ensures that an immediate assembly can be made thus avoiding costly factory down-time.
•  
•  
• Here are the dimensions of Taper Bushing with type 1210 (30.25)
• - Bore : we provide taper bushing with minimal bore 12 mm and 5/8 inches; for the max bore you can look at the number writen after "BC" in every product name. 
• for example, BC3025F12 (1210X12MM), so the max bore is 30 mm.
• - Width : the numbers writen in every product name before "F" is width size.
• for example, BC3025F12 (1210X12MM), so the width is 25 mm.
• - Bore size : look at the last number in every product name. 
• for example, BC3025F12, so the bore size is 12.

POWERLOCK locking assembly unit consists of four pieces with two inside double-one rings joined through a set of tightening screws. It is recomended for medium torques. Although it is not self centering, it can be easily assembled and diassembled.

Sprocket for chain according to DIN 8187 - ISO/R 606

D_e : External Diameter   mm

D_p : Pitch Diameter        mm

D_m : Hub Diameter        mm

W  :  Weight                  kg

Sprocket for chain according to DIN 8187 - ISO/R 606

D_e : External Diameter   mm

D_p : Pitch Diameter        mm

D_m : Hub Diameter        mm

W  :  Weight                  kg

No description for this product yet.

• POWERLOCK locking assembly unit consists of four pieces with two inside double-one rings joined through a set of tightening screws. It is recomended for medium torques. Although it is not self centering, it can be easily assembled and diassembled.
•  
•  
• Inner Diameter : 48 mm
• Outside Diameter : 80 mm
• High : 24 mm
• Screws : 12 
• Type of Screws : M8

• The CLASSICA® synchronous belt, being designed with imperial pitch, is a valid and economical altenative solution in low/medium torque transmission systems. 
•  
• Reduced elongation, no need of lubrication and low wearing makes this belt an economic and reliable option. 
•  
• How to measure the size of a product : 
• For example, CD210L075
• - 210 = pitch length x 10 (inches) 
• - L = pitch 
• - 75 = belt width x 100 (inches) 

• Type of belt : AT5
• Pitch : 5 mm
• Pitch diameter : 46.55 mm
• Outside diameter + flange: 50 mm
• Teeth : 30
• Belt width : 16 mm
• Type of pulley : 2
• Material : Aluminium

• Type of belt : H
• Pitch : 12.700 mm
• Pitch diameter : 63.31 mm
• Outside diameter + flange: 67 mm
• Teeth : 16
• Type of bush : 1108; max bore : 28 mm
• Belt width : 1.50 inch
• Type of pulley : 4
• Material : Cast iron
• Flange : With flange 

• Inner Diameter : 55 mm
• Outside Diameter : 85 mm
• High : 33 mm
• Screws : 8
• Type of Screws : M8

Sprocket for chain according to DIN 8187 - ISO/R 606

D_e : External Diameter   mm

D_p : Pitch Diameter        mm

D_m : Hub Diameter        mm

W  :  Weight                  kg

Sprocket for chain according to DIN 8187 - ISO/R 606

D_e : External Diameter   mm

D_p : Pitch Diameter        mm

D_m : Hub Diameter        mm

W  :  Weight                  kg

No description for this product yet.

Sprocket for chain according to DIN 8187 - ISO/R 606

D_e : External Diameter   mm

D_p : Pitch Diameter        mm

D_m : Hub Diameter        mm

W  :  Weight                  kg

• Locking assembly with single taper design. Provides good concentricity and is self centering. 
• SITLOCK® 6 is suitable for applications with medium torques.
•  
• For the dimension of the product, please download the catalog in the document section.

• Type of belt : 8 M 
• Pitch : 8 mm
• Pitch diameter : 75.02 mm
• Outside diameter + flange : 84 mm 
• Teeth : 30
• Belt width : 30 mm
• Type of pulley : 1
• Material : Steel
• Flange : With flanges 

• SITEX® gear couplings consist of two toothed hubs which are connected with one internally toothed sleeve. The hubs are made of steel and the teeth, which are both profiled and section crowned, are obtained from milling. The sleeve is manufactured from stabilized 6.6 superpolymade resin.
•  
• Here are the dimensions of product :
• Outside diameter of sleeve : : 142 mm 
• Outside diameter of the hub : 96 mm 
• Total length : 144  mm 
• Length of sleeve : 73 mm 

• Type of belt : 8 M 
• Pitch :  8 mm
• Pitch diameter : 64.84 mm
• Outside diameter + flange : 73 mm
• Teeth : 26
• Type of bush : 1108
• Belt width : 30 mm
• Type of pulley :4
• Material : Cast iron
• Flange : With flanges 

No description for this product yet.