• SIT TAPER LOCK BUSHING is designed to give the following:
• 1. Perfect assembly
• 2. rapid dismantling of the pulley and other transmission equipment
• 3. No special tools requirement except hexagonal key
•  
• The large range of finished bores available ensures that an immediate assembly can be made thus avoiding costly factory down-time.
•  
•  
• Here are the dimensions of Taper Bushing with type 1210 (30.25)
• - Bore : we provide taper bushing with minimal bore 12 mm and 5/8 inches; for the max bore you can look at the number writen after "BC" in every product name. 
• for example, BC3025F12 (1210X12MM), so the max bore is 30 mm.
• - Width : the numbers writen in every product name before "F" is width size.
• for example, BC3025F12 (1210X12MM), so the width is 25 mm.
• - Bore size : look at the last number in every product name. 
• for example, BC3025F12, so the bore size is 12.

• Taper Bush : 2517
• Shaft Diameter Range : 18 - 65 mm
• Pitch Diameter : 150 mm
• Outside Diameter : 157 mm
• Groove : 4

• Type of belt : T10
• Pitch : 10 mm
• Pitch diameter : 87.25 mm
• Outside diameter + flange: 94 mm
• Teeth : 28
• Belt width : 32 mm
• Type of pulley : 2
• Material : Aluminium

• No Lubrication
• Easy Instalation
• No metal to metal contact
• Resistant to oil, dirt, sand, moisture, grease
• Easy inspection of load carrying spider
• Flexibility of angular or parallel misalignment of shafts by Bruna-N spider member permits smooth "power transmission"

• Taper Bush : 3020
• Shaft Diameter Range : 25 - 75 mm
• Pitch Diameter : 170 mm
• Outside Diameter : 177 mm
• Groove : 5

• Taper Bush : 2517 
• Shaft Diameter Range : 18 - 65 mm
• Pitch Diameter : 200 mm
• Outside Diameter : 207 mm
• Groove : 2

• Taper Bush : 2517
• Shaft Diameter Range : 18 - 65 mm
• Pitch Diameter : 236 mm
• Outside Diameter : 243 mm
• Groove : 2

No description for this product yet.

• Inner Diameter : 80 mm
• Outside Diameter : 120 mm
• High : 78 mm
• Screws : 12
• Type of Screws : M10

• SIT TAPER LOCK BUSHING is designed to give the following:
• 1. Perfect assembly
• 2. rapid dismantling of the pulley and other transmission equipment
• 3. No special tools requirement except hexagonal key
•  
• The large range of finished bores available ensures that an immediate assembly can be made thus avoiding costly factory down-time.
•  
•  
• Here are the dimensions of Taper Bushing with type 3020 (75.50)
• - Bore : we provide taper bushing with minimal bore 22 mm and 1-1/4 inches; for the max bore you can look at the number writen after "BC" in every product name. 
• for example, BC7550F22 (3020X22MM), so the max bore is 75 mm.
• - Width : the numbers writen in every product name before "F" is width size.
• for example, BC7550F22 (3020X22MM), so the width is 50 mm.
• - Bore size : look at the last number in every product name. 
• for example, BC7550F22, so the bore size is 22.

• Our pulleys can be used for application with a speed up to 35m/s. The pulley dimensions are very accurate as they are manufactured only by means of CNC or automatic lathes. 
•  
• For higher speed is strongly recomended to use steel as material of construction. Our PBT pulleys are satically balanced according to ISO. 
•  
• The PT pulleys are not balanced, as they do not have a finished bores.
•  
• Here are the dimensions of "PBT" SPZ with taper bush 1210 :
• - Belt type : SPZ
• - Taperbush : 1210
• - Shaft diameter range : 12 - 32 mm
• - Pitch diameter : refer to numbers writen after "PBT" in every product name. 
• For example, product name : PBT075SPZ2 (1210); so, the pitch diameter is 75 mm
• - Outside diameter : you can add the pitch diameter with 4 to know the length of outside diameter. 
• For example, the product is PBT075SPZ2 (1210); so the outside diameter is 75 + 4 = 79 mm
• - Groove : refer to the last number in every product name. 
• For example for PBT075SPZ2; so, the groove is 2 
•  
• See recomendation taperbush below.

• Our pulleys can be used for application with a speed up to 35m/s. The pulley dimensions are very accurate as they are manufactured only by means of CNC or automatic lathes. 
•  
• For higher speed is strongly recomended to use steel as material of construction. Our PBT pulleys are satically balanced according to ISO. 
•  
• The PT pulleys are not balanced, as they do not have a finished bores.
•  
• Here are the dimensions of "PBT" SPZ with taper bush 1210 :
• - Belt type : SPZ
• - Taperbush : 1210
• - Shaft diameter range : 12 - 32 mm
• - Pitch diameter : refer to numbers writen after "PBT" in every product name. 
• For example, product name : PBT075SPZ2 (1210); so, the pitch diameter is 75 mm
• - Outside diameter : you can add the pitch diameter with 4 to know the length of outside diameter. 
• For example, the product is PBT075SPZ2 (1210); so the outside diameter is 75 + 4 = 79 mm
• - Groove : refer to the last number in every product name. 
• For example for PBT075SPZ2; so, the groove is 2 
•  
• See recomendation taperbush below.

• SIT TAPER LOCK BUSHING is designed to give the following:
• 1. Perfect assembly
• 2. rapid dismantling of the pulley and other transmission equipment
• 3. No special tools requirement except hexagonal key
•  
• The large range of finished bores available ensures that an immediate assembly can be made thus avoiding costly factory down-time.
•  
•  
• Here are the dimensions of Taper Bushing with type 3535 (90.90)
•  
• - Bore : we provide taper bushing with minimal bore 25 mm; for the max bore you can look at the number writen after "BC" in every product name. 
• for example, BC9090F25 (3535X25MM) so the max bore is 90 mm.
• - Width : the numbers writen in every product name before "F" is width size.
• for example, BC9090F25 (3535X25MM), so the width is 90 mm.
• - Bore size : look at the last number in every product name. 
• for example, BC9090F25, so the bore size is 25.

No description for this product yet.

• SITEX® gear couplings consist of two toothed hubs which are connected with one internally toothed sleeve. The sleeve is manufactured from stabilized 6.6 superpolyamide resin. 
•  
• The torsional rigidity of the sleeve prevents angular speed variation. The combination of steel hubs with polyamide sleeve makes the coupling maintenance and lubrication free. 
•  
• The particular toothed profile prevents contact of tooth edged with the sleeve, ensuring long life of the coupling.
•  
• Here are the dimensions of product : 
• Outside diameter : 48 mm
• Length : 37 mm 

• SITEX® gear couplings consist of two toothed hubs which are connected with one internally toothed sleeve. The hubs are made of steel and the teeth, which are both profiled and section crowned, are obtained from milling. The sleeve is manufactured from stabilized 6.6 superpolymade resin.
•  
• Coupling are available from stock, both the standard and the "long" hub execution, which entirely covers the motor shaft.
•  
• Here are the dimensions of couplings with"long" hub execution :
• Outside diameter of sleeve : : 100 mm 
• Outside diameter of the hub : 68 mm 
• Total length : 224 mm 
• Length of sleeve : 50 mm 

Sprocket for chain according to DIN 8187 - ISO/R 606

D_e : External Diameter   mm

D_p : Pitch Diameter        mm

D_m : Hub Diameter        mm

W  :  Weight                  kg

Sprocket for chain according to DIN 8187 - ISO/R 606

D_e : External Diameter   mm

D_p : Pitch Diameter        mm

D_m : Hub Diameter        mm

W  :  Weight                  kg

• HTD pulleys have a different design from the traditional toothed pulleys. The axial grooves are designed to allow the beltteeth to catch the pulley teeth with negligible triction. HTD Pulleys are available with full hub and for assembly with SER-SIT taper bushing.
•  
•  
•  
• Product detail : 
•  
• Type of belt : 8 M 
• Pitch :  8  mm
• Pitch diameter : 100.49 mm
• Outside diameter + flange : 108 mm
• Teeth : 40
• Type of bush : 1610
• Belt width : 20 mm
• Type of pulley :4
• Material : Cast iron
• Flange : With flanges 

1. Type of belt : T10
2. Pitch : 10 mm
3. Pitch diameter : 68.15 mm
4. Outside diameter + flange: 73 mm
5. Teeth : 22
6. Belt width : 32 mm
7. Type of pulley : 2
8. Material : Aluminium

• Type of belt : AT10
• Pitch : 10 mm
• Pitch diameter : 77.70 mm
• Outside diameter + flange: 84 mm
• Teeth : 25
• Belt width : 32 mm
• Type of pulley : 2
• Material : Aluminium

No description for this product yet.