SIT TAPER LOCK BUSHING is designed to give the following:
1. Perfect assembly
2. rapid dismantling of the pulley and other transmission equipment
3. No special tools requirement except hexagonal key
The large range of finished bores available ensures that an immediate assembly can be made thus avoiding costly factory down-time.
Here are the dimensions of Taper Bushing with type 1610 (40.25)
- Bore : we provide taper bushing with minimal bore 12 mm and 3/8 inches; for the max bore you can look at the number writen after "BC" in every product name.
for example, BC4025F12 (1610X12MM), so the max bore is 40 mm.
- Width : the numbers writen in every product name before "F" is width size.
for example, BC4025F12 (1610X12MM), so the width is 25 mm.
- Bore size : look at the last number in every product name.
standard connecting links are used when roller chains are operated under normal conditions. for severe applications, press fit connecting links are suggested.
SIT TAPER LOCK BUSHING is designed to give the following:
1. Perfect assembly
2. rapid dismantling of the pulley and other transmission equipment
3. No special tools requirement except hexagonal key
The large range of finished bores available ensures that an immediate assembly can be made thus avoiding costly factory down-time.
Here are the dimensions of Taper Bushing with type 3020 (75.50)
- Bore : we provide taper bushing with minimal bore 22 mm and 1-1/4 inches; for the max bore you can look at the number writen after "BC" in every product name.
for example, BC7550F22 (3020X22MM), so the max bore is 75 mm.
- Width : the numbers writen in every product name before "F" is width size.
for example, BC7550F22 (3020X22MM), so the width is 50 mm.
- Bore size : look at the last number in every product name.
SITEX® gear couplings consist of two toothed hubs which are connected with one internally toothed sleeve. The sleeve is manufactured from stabilized 6.6 superpolyamide resin.
The torsional rigidity of the sleeve prevents angular speed variation. The combination of steel hubs with polyamide sleeve makes the coupling maintenance and lubrication free.
The particular toothed profile prevents contact of tooth edged with the sleeve, ensuring long life of the coupling.
HRC couplings offer a range of hub and element selection to meet the demand for a low cost, general purpose spacer type flexible coupling. They allow for incidental misalignment, absorb shock loads and dampen out small amplitude vibrations. They are offered in both pilot bore, finished bore, Finished bore, and Taper bushed with both face and hub mount.
SIT TAPER LOCK BUSHING is designed to give the following:
1. Perfect assembly
2. rapid dismantling of the pulley and other transmission equipment
3. No special tools requirement except hexagonal key
The large range of finished bores available ensures that an immediate assembly can be made thus avoiding costly factory down-time.
Here are the dimensions of Taper Bushing with type 1610 (40.25)
- Bore : we provide taper bushing with minimal bore 12 mm and 3/8 inches; for the max bore you can look at the number writen after "BC" in every product name.
for example, BC4025F12 (1610X12MM), so the max bore is 40 mm.
- Width : the numbers writen in every product name before "F" is width size.
for example, BC4025F12 (1610X12MM), so the width is 25 mm.
- Bore size : look at the last number in every product name.
SIT TAPER LOCK BUSHING is designed to give the following:
1. Perfect assembly
2. rapid dismantling of the pulley and other transmission equipment
3. No special tools requirement except hexagonal key
The large range of finished bores available ensures that an immediate assembly can be made thus avoiding costly factory down-time.
Here are the dimensions of Taper Bushing with type 2012 (50.30)
- Bore : we provide taper bushing with minimal bore 14 mm and 5/8 inches; for the max bore you can look at the number writen after "BC" in every product name.
for example, BC5030F14 (2012X14MM), so the max bore is 50 mm.
- Width : the numbers writen in every product name before "F" is width size.
for example, BC5030F14 (2012X14MM), so the width is 30 mm.
- Bore size : look at the last number in every product name.
TRASCO® ES is our zero backlash coupling designed to compensate for misalignment and vibration dampening for indexing applications. The compact design of TRASCO® ES makes it the right choice for all precise motion applications.
The TRASCO ES consist of two hubs, which are either made of high-strength aluminium (up to the 38/45 size) or steel (from size 42) that are connected with an elastic element.
Spider detail
Color : Red
Shore : 98 Sh.A
Compound : Polyurethane
Admissible Temperature [°C] : the rang is between -30 and +90°C
standard connecting links are used when roller chains are operated under normal conditions. for severe applications, press fit connecting links are suggested.
SIT TAPER LOCK BUSHING is designed to give the following:
1. Perfect assembly
2. rapid dismantling of the pulley and other transmission equipment
3. No special tools requirement except hexagonal key
The large range of finished bores available ensures that an immediate assembly can be made thus avoiding costly factory down-time.
Here are the dimensions of Taper Bushing with type 1610 (40.25)
- Bore : we provide taper bushing with minimal bore 12 mm and 3/8 inches; for the max bore you can look at the number writen after "BC" in every product name.
for example, BC4025F12 (1610X12MM), so the max bore is 40 mm.
- Width : the numbers writen in every product name before "F" is width size.
for example, BC4025F12 (1610X12MM), so the width is 25 mm.
- Bore size : look at the last number in every product name.
TRASCO flexible couplings is the flexible and omocinetic coupling that assures the best performance in relation to the physical space occupied in its class. It has a very compact design and allows safe power transmision by absorbing peak loads and torsional vibrations.