No description for this product yet.

• SIT-LOCK® locking assembly unit consists of four pieces with two inside double-one rings joined through a set of tightening screws. It is recomended for medium torques. Although it is not self centering, it can be easily assembled and diassembled.
•  
• Here are the dimensions of product :
• Inner Diameter : refer to numbers writen after "F" in every product name. For example, CAL1F20/47; so, the inner diameter is 20 mm. 
• Outside Diameter : refer to the last number in every product name. For example, CAL1F20/47; so, the outside diameter is 47 mm. 
• High : 20 mm
• Screws : 14
• Type of Screws : M6

Idler Sprockets : Ball bearing idler sprocket have sealed ball bearing with extended inner race and setscrews for securing to shaft.

Ready Sprockets : An assortment of sprockets and hubs drilled and tapped for simple, convertient assembly with standard hex head cap screws.

Finished Bore Sprockets : No. 35 through No. 80 with standard keyway and setscrew. Many sizes stocked both with and without induction hardened teeth.

• Type of belt : T5
• Pitch : 5 mm
• Pitch diameter : 34.25 mm
• Outside diameter + flange: 36 mm
• Teeth : 22
• Belt width : 16 mm
• Type of pulley : 2
• Material : Aluminium

• Type of belt : T5
• Pitch : 5 mm
• Pitch diameter : 29.40 mm
• Outside diameter + flange: 33 mm
• Teeth : 19
• Belt width : 10 mm
• Type of pulley : 2
• Material : Aluminium

• The special OPTIGEAR profile allows very high torque transmission and the compensation of axal, angular and radial misalignment (only in the version with 2 hubs). The maximum recommended working temperature is -10 °C a + 80 °C.
•  
• SITEX® ST type "C" are standard type with 2 hubs and one sleeve. Offers compact, powerful design, and easy assembly. 
•  
• Here are the dimension of product : 
• Outside diameter of the hub : 55 mm 
• Length of hub : 48.5 mm 

• The special OPTIGEAR profile allows very high torque transmission and the compensation of axal, angular and radial misalignment (only in the version with 2 hubs). The maximum recommended working temperature is -10 °C a + 80 °C.
•  
• SITEX® ST type "C" are standard type with 2 hubs and one sleeve. Offers compact, powerful design, and easy assembly. 
•  
• Here are the dimension of product : 
• Outside diameter of the hub : 65 mm 
• Length hub : 56 mm 

• The special OPTIGEAR profile allows very high torque transmission and the compensation of axal, angular and radial misalignment (only in the version with 2 hubs). The maximum recommended working temperature is -10 °C a + 80 °C.
•  
• SITEX® ST type "C" are standard type with 2 hubs and one sleeve. Offers compact, powerful design, and easy assembly. 
•  
• Here are the dimension of product : 
• Outside diameter of the hub : 130 mm 
• Length hub : 82.5 mm 

• Our pulleys can be used for application with a speed up to 35m/s. The pulley dimensions are very accurate as they are manufactured only by means of CNC or automatic lathes. 
•  
• For higher speed is strongly recomended to use steel as material of construction. Our PBT pulleys are satically balanced according to ISO. 
•  
• The PT pulleys are not balanced, as they do not have a finished bores.
•  
• Here are the dimensions of "PBT" SPB with taper bush 1610 :
• - Belt type : SPB
• - Taperbush : 1610
• - Shaft diameter range : 12 - 42 mm
• - Pitch diameter : refer to numbers writen after "PBT" in every product name. 
• For example, product name : PBT100SPB1 (1610); so, the pitch diameter is 100 mm
• - Outside diameter : you can add the pitch diameter with 7 to know the length of outside diameter. 
• For example, the product is PBT100SPB1 (1610); so the outside diameter is 100 + 7 = 107 mm
• - Groove : refer to the last number in every product name. 
• For example for PBT100SPB1; so, the groove is 1
•  
• See recomendation taperbush below.

No description for this product yet.

Sprocket for chain according to DIN 8187 - ISO/R 606

D_e : External Diameter   mm

D_p : Pitch Diameter        mm

D_m : Hub Diameter        mm

W  :  Weight                  kg

• Type of belt : XL
• Pitch : 5080 mm
• Pitch diameter : 72.26 mm
• Outside diameter + flange: -
• Teeth : 45
• Belt width : 0.37 inch
• Type of pulley : 1
• Material : Aluminium
• Flange : Without flanges

• SITEX® gear couplings consist of two toothed hubs which are connected with one internally toothed sleeve. The hubs are made of steel and the teeth, which are both profiled and section crowned, are obtained from milling. The sleeve is manufactured from stabilized 6.6 superpolymade resin.
•  
• Coupling are available from stock, both the standard and the "long" hub execution, which entirely covers the motor shaft.
•  
• Here are the dimensions of couplings with"long" hub execution :
• Outside diameter of sleeve : : 52 mm 
• Outside diameter of the hub : 35 mm 
• Total length : 104 mm 
• Length of sleeve : 41 mm 

• Type of belt : L
• Pitch : 9525 mm
• Pitch diameter : 29.56 mm
• Outside diameter + flange: 33
• Teeth : 10
• Belt width : 0.50 inch
• Type of pulley : 1
• Material : Steel
• Flange : With flanges

• Type of belt : L
• Pitch : 9525 mm
• Pitch diameter : 62.91 mm
• Outside diameter + flange: 67 mm 
• Teeth : 21
• Belt width : 0.50 inch
• Type of pulley : 1
• Material : Steel
• Flange : With flanges

• Type of belt : L
• Pitch : 9525 mm
• Pitch diameter : 75.04 mm
• Outside diameter + flange: 80 mm 
• Teeth : 25
• Belt width : 0.50 inch
• Type of pulley : 1
• Material : Steel
• Flange : With flanges

• Type of belt : T10
• Pitch : 10 mm
• Pitch diameter : 112.75 mm
• Outside diameter + flange: 118 mm
• Teeth : 36
• Belt width : 32 mm
• Type of pulley : 2
• Material : Aluminium

• Taper Bush : 3020
• Shaft Diameter Range : 25 - 75 mm
• Pitch Diameter : 190 mm
• Outside Diameter : 197 mm
• Groove : 5

• Type of belt : L
• Pitch : 9525 mm
• Pitch diameter : 32.59 mm
• Outside diameter + flange: 36
• Teeth : 11
• Belt width : 0.50 inch
• Type of pulley : 1
• Material : Steel
• Flange : With flanges

• Type of belt : L
• Pitch : 9525 mm
• Pitch diameter : 56.84 mm
• Outside diameter + flange: 62 mm 
• Teeth : 19
• Belt width : 0.75 inch
• Type of pulley : 1
• Material : Steel
• Flange : With flanges

• Type of belt : L
• Pitch : 9525 mm
• Pitch diameter : 59.88 mm
• Outside diameter + flange: 67 mm 
• Teeth : 20
• Belt width : 0.75 inch
• Type of pulley : 1
• Material : Steel
• Flange : With flanges

• Taper Bush : 3020
• Shaft Diameter Range : 25 - 75 mm
• Pitch Diameter : 200 mm
• Outside Diameter : 207 mm
• Groove : 5

• POWERLOCK locking assembly unit consists of four pieces with two inside double-one rings joined through a set of tightening screws. It is recomended for medium torques. Although it is not self centering, it can be easily assembled and diassembled.
•  
•  
• Inner Diameter : 32 mm
• Outside Diameter : 60 mm
• High : 20 mm
• Screws : 12
• Type of Screws : M6