• POWERLOCK locking assembly unit consists of four pieces with two inside double-one rings joined through a set of tightening screws. It is recomended for medium torques. Although it is not self centering, it can be easily assembled and diassembled.
•  
•  
• Inner Diameter : 95 mm
• Outside Diameter : 135 mm
• High : 28 mm
• Screws : 18
• Type of Screws : M10

Sprocket for chain according to DIN 8187 - ISO/R 606

D_e : External Diameter   mm

D_p : Pitch Diameter        mm

D_m : Hub Diameter        mm

W  :  Weight                  kg

Sprocket for chain according to DIN 8187 - ISO/R 606

D_e : External Diameter   mm

D_p : Pitch Diameter        mm

D_m : Hub Diameter        mm

W  :  Weight                  kg

No description for this product yet.

Sprocket for chain according to DIN 8187 - ISO/R 606

D_e : External Diameter   mm

D_p : Pitch Diameter        mm

D_m : Hub Diameter        mm

W  :  Weight                  kg

• Taper Bush : 2012
• Shaft Diameter Range : 15 - 50 mm
• Pitch Diameter : 118 mm
• Outside Diameter : 122 mm
• Groove : 4

Sprocket for chain according to DIN 8187 - ISO/R 606

D_e : External Diameter   mm

D_p : Pitch Diameter        mm

D_m : Hub Diameter        mm

W  :  Weight                  kg

No description for this product yet.

No description for this product yet.

No description for this product yet.

• Type of belt : H
• Pitch : 12700 mm
• Pitch diameter : 67.35 mm
• Outside diameter + flange: 77 mm 
• Teeth : 17
• Belt width : 2.00 inch
• Type of pulley : 1
• Material : Steel
• Flange : With flanges

• Inner Diameter : 50 mm
• Outside Diameter : 80 mm
• High : 62 mm
• Screws : 8
• Type of Screws : M8

• SIT TAPER LOCK BUSHING is designed to give the following:
• 1. Perfect assembly
• 2. rapid dismantling of the pulley and other transmission equipment
• 3. No special tools requirement except hexagonal key
•  
• The large range of finished bores available ensures that an immediate assembly can be made thus avoiding costly factory down-time.
•  
•  
• Here are the dimensions of Taper Bushing with type 2012 (50.30)
• - Bore : we provide taper bushing with minimal bore 14 mm and 5/8 inches; for the max bore you can look at the number writen after "BC" in every product name. 
• for example, BC5030F14 (2012X14MM), so the max bore is 50 mm.
• - Width : the numbers writen in every product name before "F" is width size.
• for example, BC5030F14 (2012X14MM), so the width is 30 mm.
• - Bore size : look at the last number in every product name. 
• for example, BC5030F14, so the bore size is 14.

No description for this product yet.

• Type of belt : XL
• Pitch : 5080 mm
• Pitch diameter : 35.06 mm
• Outside diameter + flange: 40 mm 
• Teeth : 22
• Belt width : 0.37 inch
• Type of pulley : 1
• Material : Aluminium
• Flange : With flanges

• SIT TAPER LOCK BUSHING is designed to give the following:
• 1. Perfect assembly
• 2. rapid dismantling of the pulley and other transmission equipment
• 3. No special tools requirement except hexagonal key
•  
• The large range of finished bores available ensures that an immediate assembly can be made thus avoiding costly factory down-time.
•  
•  
• Here are the dimensions of Taper Bushing with type 2517 (65.45)
• - Bore : we provide taper bushing with minimal bore 16 mm and 3/4 inches; for the max bore you can look at the number writen after "BC" in every product name. 
• for example, BC6545F16 (2517X16MM), so the max bore is 65 mm.
• - Width : the numbers writen in every product name before "F" is width size.
• for example, BC6545F16 (2517X16MM), so the width is 45 mm.
• - Bore size : look at the last number in every product name. 
• for example, BC6545F16, so the bore size is 16.

No description for this product yet.

No description for this product yet.

No description for this product yet.

Sprocket for chain according to DIN 8187 - ISO/R 606

D_e : External Diameter   mm

D_p : Pitch Diameter        mm

D_m : Hub Diameter        mm

W  :  Weight                  kg