Sprocket for chain according to DIN 8187 - ISO/R 606

D_e : External Diameter   mm

D_p : Pitch Diameter        mm

D_m : Hub Diameter        mm

W  :  Weight                  kg

• No Lubrication
• Easy Instalation
• No metal to metal contact
• Resistant to oil, dirt, sand, moisture, grease
• Easy inspection of load carrying spider
• Flexibility of angular or parallel misalignment of shafts by Bruna-N spider member permits smooth "power transmission"

• No Lubrication
• Easy Instalation
• No metal to metal contact
• Resistant to oil, dirt, sand, moisture, grease
• Easy inspection of load carrying spider
• Flexibility of angular or parallel misalignment of shafts by Bruna-N spider member permits smooth "power transmission"

No description for this product yet.

No description for this product yet.

• SIT TAPER LOCK BUSHING is designed to give the following:
• 1. Perfect assembly
• 2. rapid dismantling of the pulley and other transmission equipment
• 3. No special tools requirement except hexagonal key
•  
• The large range of finished bores available ensures that an immediate assembly can be made thus avoiding costly factory down-time.
•  
•  
• Here are the dimensions of Taper Bushing with type 2517 (65.45)
• - Bore : we provide taper bushing with minimal bore 16 mm and 3/4 inches; for the max bore you can look at the number writen after "BC" in every product name. 
• for example, BC6545F16 (2517X16MM), so the max bore is 65 mm.
• - Width : the numbers writen in every product name before "F" is width size.
• for example, BC6545F16 (2517X16MM), so the width is 45 mm.
• - Bore size : look at the last number in every product name. 
• for example, BC6545F16, so the bore size is 16.

No description for this product yet.

• TRASCO flexible couplings is the flexible and omocinetic coupling that assures the best performance in relation to the physical space occupied in its class. It has a very compact design and allows safe power transmision by absorbing peak loads and torsional vibrations.
•  
• Product detail 
• Outside diameter : 65 mm
• Max bore : 28 mm
• Material : Aluminium, die-casting 
•  
• Approved according to EC standard ATEX 94/9/EC

No description for this product yet.

Sprocket for chain according to DIN 8187 - ISO/R 606

D_e : External Diameter   mm

D_p : Pitch Diameter        mm

D_m : Hub Diameter        mm

W  :  Weight                  kg

No description for this product yet.

No description for this product yet.

• POWERLOCK locking assembly unit consists of four pieces with two inside double-one rings joined through a set of tightening screws. It is recomended for medium torques. Although it is not self centering, it can be easily assembled and diassembled.
•  
•  
• Inner Diameter : 50 mm
• Outside Diameter : 80 mm
• High : 24 mm
• Screws : 12
• Type of Screws : M8

Sprocket for chain according to DIN 8187 - ISO/R 606

D_e : External Diameter   mm

D_p : Pitch Diameter        mm

D_m : Hub Diameter        mm

W  :  Weight                  kg

• Taper Bush : 2517
• Shaft Diameter Range : 18 - 65 mm
• Pitch Diameter : 180 mm
• Outside Diameter : 185.6 mm
• Groove : 4

No description for this product yet.

No description for this product yet.

• Inner Diameter : 100 mm
• Outside Diameter : 145 mm
• High : 33 mm
• Screws : 14
• Type of Screws : M12

• Type of belt : H
• Pitch : 12700 mm
• Pitch diameter : 55.23 mm
• Outside diameter + flange: 62
• Teeth : 14
• Belt width : 1.00 inch
• Type of pulley : 1
• Material : Steel
• Flange : With flanges

• SIT TAPER LOCK BUSHING is designed to give the following:
• 1. Perfect assembly
• 2. rapid dismantling of the pulley and other transmission equipment
• 3. No special tools requirement except hexagonal key
•  
• The large range of finished bores available ensures that an immediate assembly can be made thus avoiding costly factory down-time.
•  
•  
• Here are the dimensions of Taper Bushing with type 2517 (65.45)
• - Bore : we provide taper bushing with minimal bore 16 mm and 3/4 inches; for the max bore you can look at the number writen after "BC" in every product name. 
• for example, BC6545F16 (2517X16MM), so the max bore is 65 mm.
• - Width : the numbers writen in every product name before "F" is width size.
• for example, BC6545F16 (2517X16MM), so the width is 45 mm.
• - Bore size : look at the last number in every product name. 
• for example, BC6545F16, so the bore size is 16.

• SIT TAPER LOCK BUSHING is designed to give the following:
• 1. Perfect assembly
• 2. rapid dismantling of the pulley and other transmission equipment
• 3. No special tools requirement except hexagonal key
•  
• The large range of finished bores available ensures that an immediate assembly can be made thus avoiding costly factory down-time.
•  
•  
• Here are the dimensions of Taper Bushing with type 2517 (65.45)
• - Bore : we provide taper bushing with minimal bore 16 mm and 3/4 inches; for the max bore you can look at the number writen after "BC" in every product name. 
• for example, BC6545F16 (2517X16MM), so the max bore is 65 mm.
• - Width : the numbers writen in every product name before "F" is width size.
• for example, BC6545F16 (2517X16MM), so the width is 45 mm.
• - Bore size : look at the last number in every product name. 
• for example, BC6545F16, so the bore size is 16.

• Type of belt : T5
• Pitch : 5 mm
• Pitch diameter : 24.60 mm
• Outside diameter + flange: 30 mm
• Teeth : 16
• Belt width : 10 mm
• Type of pulley : 2
• Material : Aluminium

No description for this product yet.

No description for this product yet.