No description for this product yet.

No description for this product yet.

• Type of belt : 8 M 
• Pitch :  8 mm
• Pitch diameter : 59.74 mm
• Outside diameter + flange : 67 mm
• Teeth : 24
• Type of bush : 1108
• Belt width : 30 mm
• Type of pulley :4
• Material : Cast iron
• Flange : With flanges 

No description for this product yet.

• SIT TAPER LOCK BUSHING is designed to give the following:
• 1. Perfect assembly
• 2. rapid dismantling of the pulley and other transmission equipment
• 3. No special tools requirement except hexagonal key
•  
• The large range of finished bores available ensures that an immediate assembly can be made thus avoiding costly factory down-time.
•  
•  
• Here are the dimensions of Taper Bushing with type 1215 (30.40)
• - Bore : we provide taper bushing with minimal bore 11 mm and 1 inches; for the max bore you can look at the number writen after "BC" in every product name. 
• for example, BC3040F11 (1215X11MM), so the max bore is 30 mm.
• - Width : the numbers writen in every product name before "F" is width size.
• for example, BC3040F11 (1215X11MM), so the width is 40 mm.
• - Bore size : look at the last number in every product name. 
• for example, BC3040F11, so the bore size is 11.

No description for this product yet.

• No Lubrication
• Easy Instalation
• No metal to metal contact
• Resistant to oil, dirt, sand, moisture, grease
• Easy inspection of load carrying spider
• Flexibility of angular or parallel misalignment of shafts by Bruna-N spider member permits smooth "power transmission"

• Taper Bush : 2517 
• Shaft Diameter Range : 18 - 65 mm
• Pitch Diameter : 200 mm
• Outside Diameter : 207 mm
• Groove : 2

• HTD pulleys have a different design from the traditional toothed pulleys. The axial grooves are designed to allow the beltteeth to catch the pulley teeth with negligible triction. HTD Pulleys are available with full hub and for assembly with SER-SIT taper bushing.
•  
•  
• Product detail : 
•  
• Type of belt : 14 M 
• Pitch :  14 mm
• Pitch diameter : 175.49 mm
• Outside diameter + flange : 186 mm
• Teeth : 40
• Type of bush : 2517
• Belt width : 40 mm
• Type of pulley :2
• Material : Cast iron
• Flange : With flanges 

• Type of belt : L
• Pitch : 9525 mm
• Pitch diameter : 132.64 mm
• Outside diameter + flange: 142 mm 
• Teeth : 44
• Belt width : 0.75 inch
• Type of pulley : 2
• Material : Cast iron
• Flange : With flanges

• Type of belt : 14 M 
• Pitch : 14 mm
• Pitch diameter : 122.12 mm
• Outside diameter + flange : 134 mm 
• Teeth : 28
• Belt width : 55 mm
• Type of pulley : 1
• Material : Cast iron 
• Flange : With flanges 

• Type of belt : 14 M 
• Pitch :  14 mm
• Pitch diameter : 122.12  mm
• Outside diameter + flange : 134 mm
• Teeth : 28 
• Type of bush : 2012
• Belt width : 55 mm
• Type of pulley :2
• Material : Cast iron
• Flange : With flanges 

• Type of belt : L
• Pitch : 9525 mm
• Pitch diameter : 59.88 mm
• Outside diameter + flange: 67 mm 
• Teeth : 20
• Belt width : 1.00 inch
• Type of pulley : 1
• Material : Steel
• Flange : With flanges

• Type of belt : H
• Pitch : 12700 mm
• Pitch diameter : 67.35 mm
• Outside diameter + flange: 77 mm 
• Teeth : 17
• Belt width : 1.00 inch
• Type of pulley : 1
• Material : Steel
• Flange : With flanges

• TRASCO flexible couplings is the flexible and omocinetic coupling that assures the best performance in relation to the physical space occupied in its class. It has a very compact design and allows safe power transmision by absorbing peak loads and torsional vibrations.
•  
• Spider detail 
• Color : Red
• Shore : 98 Sh.A 
• Compound : Polyurethane 
• Admissible Temperature [°C] : from - 30 to + 90 (on work) 

• TRASCO flexible couplings is the flexible and omocinetic coupling that assures the best performance in relation to the physical space occupied in its class. It has a very compact design and allows safe power transmision by absorbing peak loads and torsional vibrations.
•  
• Spider detail 
• Color : Yellow 
• Shore : 92 Sh.A 
• Compound : Polyurethane 
• Admissible Temperature [°C] : from - 40 to + 90 (on work)

• TRASCO® ES is our zero backlash coupling designed to compensate for misalignment and vibration dampening for indexing applications. The compact design of TRASCO® ES makes it the right choice for all precise motion applications.
•  
• The TRASCO ES consist of two hubs, which are either made of high-strength aluminium (up to the 38/45 size) or steel (from size 42) that are connected with an elastic element.
•  
• Spider detail 
• Color : Red
• Shore : 98 Sh.A
• Compound : Polyurethane 
• Admissible Temperature [°C] : the rang is between -30 and +90°C

• Inner Diameter : 180 mm
• Outside Diameter : 235 mm
• High : 146 mm
• Screws : 16  
• Type of Screws : M16 

• Inner Diameter : 190 mm
• Outside Diameter : 250 mm
• High : 146 mm
• Screws : 16 
• Type of Screws : M16

• Inner Diameter : 200 mm
• Outside Diameter : 260 mm
• High : 146 mm
• Screws : 16
• Type of Screws : M16

Sprocket for chain according to DIN 8187 - ISO/R 606

D_e : External Diameter   mm

D_p : Pitch Diameter        mm

D_m : Hub Diameter        mm

W  :  Weight                  kg

• Our pulleys can be used for application with a speed up to 35m/s. The pulley dimensions are very accurate as they are manufactured only by means of CNC or automatic lathes. 
•  
• For higher speed is strongly recomended to use steel as material of construction. Our PBT pulleys are satically balanced according to ISO. 
•  
• The PT pulleys are not balanced, as they do not have a finished bores.
•  
• Here are the dimensions of "PBT" SPZ with taper bush 1610 :
• - Belt type : SPZ
• - Taperbush : 1610
• - Shaft diameter range : 12 - 42 mm
• - Pitch diameter : refer to numbers writen after "PBT" in every product name. 
• For example, product name : PBT085SPZ2 (1610); so, the pitch diameter is 85 mm
• - Outside diameter : you can add the pitch diameter with 4 to know the length of outside diameter. 
• For example, the product is PBT085SPZ2 (1610); so the outside diameter is 85 + 4 = 89 mm
• - Groove : refer to the last number in every product name. 
• For example for PBT085SPZ2; so, the groove is 2 
•  
• See recomendation taperbush below.

• SIT TAPER LOCK BUSHING is designed to give the following:
• 1. Perfect assembly
• 2. rapid dismantling of the pulley and other transmission equipment
• 3. No special tools requirement except hexagonal key
•  
• The large range of finished bores available ensures that an immediate assembly can be made thus avoiding costly factory down-time.
•  
•  
• Here are the dimensions of Taper Bushing with type 3535 (90.90)
•  
• - Bore : we provide taper bushing with minimal bore 25 mm; for the max bore you can look at the number writen after "BC" in every product name. 
• for example, BC9090F25 (3535X25MM) so the max bore is 90 mm.
• - Width : the numbers writen in every product name before "F" is width size.
• for example, BC9090F25 (3535X25MM), so the width is 90 mm.
• - Bore size : look at the last number in every product name. 
• for example, BC9090F25, so the bore size is 25.