Currency change to United States Dollar
All Products 21140
.png)
Available
[Please login to see price]
Available
SIT
- SIT TAPER LOCK BUSHING is designed to give the following:
- 1. Perfect assembly
- 2. rapid dismantling of the pulley and other transmission equipment
- 3. No special tools requirement except hexagonal key
- The large range of finished bores available ensures that an immediate assembly can be made thus avoiding costly factory down-time.
- Here are the dimensions of Taper Bushing with type 3535 (90.90)
- - Bore : we provide taper bushing with minimal bore 25 mm; for the max bore you can look at the number writen after "BC" in every product name.
- for example, BC9090F25 (3535X25MM) so the max bore is 90 mm.
- - Width : the numbers writen in every product name before "F" is width size.
- for example, BC9090F25 (3535X25MM), so the width is 90 mm.
- - Bore size : look at the last number in every product name.
- for example, BC9090F25, so the bore size is 25.
[Please login to see price]
Ask Quote
Available
STARKZ
Sprocket for chain according to DIN 8187 - ISO/R 606
De : External Diameter mm
Dp : Pitch Diameter mm
Dm : Hub Diameter mm
W : Weight kg
[Please login to see price]
Ask Quote
Available
.png)
SIT
- Taper Bush : 2012
- Shaft Diameter Range : 15 - 50 mm
- Pitch Diameter : 140 mm
- Outside Diameter : 145.6 mm
- Groove : 2
[Please login to see price]
Ask Quote
Available
Available
SIT
- Type of belt : H
- Pitch : 12700 mm
- Pitch diameter : 95.65 mm
- Outside diameter + flange: 104 mm
- Teeth : 24
- Type of bush : 1610; max bore : 42 mm
- Belt width : 1.50 inch
- Type of pulley : 4
- Material : Cast iron
- Flange : With flange
[Please login to see price]
Ask Quote
Available
STARKZ
Dimensions in milimeters:
Keyways are British Standard Metric B S 4235. Part 1: 1972 DIN 6885 and conform to ISO recomendations with the exception of those marked, which are shallower. Where a key is to be used it should be parallel and side fitting, with top clearance. Depth of keyway is measured at the CENTRE
[Please login to see price]
Ask Quote
Available
SIT
- SITEX® gear couplings consist of two toothed hubs which are connected with one internally toothed sleeve. The hubs are made of steel and the teeth, which are both profiled and section crowned, are obtained from milling. The sleeve is manufactured from stabilized 6.6 superpolymade resin.
- Here are the dimensions of product :
- Outside diameter of sleeve : : 100 mm
- Outside diameter of the hub : 68 mm
- Total length : 104 mm
- Length of sleeve : 50 mm
[Please login to see price]
Ask Quote
Available
SIT
- TRASCO® ES is our zero backlash coupling designed to compensate for misalignment and vibration dampening for indexing applications. The compact design of TRASCO® ES makes it the right choice for all precise motion applications.
- The TRASCO ES consist of two hubs, which are either made of high-strength aluminium (up to the 38/45 size) or steel (from size 42) that are connected with an elastic element.
- Spider detail
- Color : Yellow
- Shore : 92 Sh.A
- Compound : Polyurethane
- Admissible Temperature [°C] :the range is between -40 and +90°C
[Please login to see price]
Ask Quote
Available
STARKZ
HRC couplings offer a range of hub and element selection to meet the demand for a low cost, general purpose spacer type flexible coupling. They allow for incidental misalignment, absorb shock loads and dampen out small amplitude vibrations. They are offered in both pilot bore, finished bore, Finished bore, and Taper bushed with both face and hub mount.
[Please login to see price]
Ask Quote
Available
Available
Available
Available
Available
Available
Available
Available
Available
SIT
- SIT TAPER LOCK BUSHING is designed to give the following:
- 1. Perfect assembly
- 2. rapid dismantling of the pulley and other transmission equipment
- 3. No special tools requirement except hexagonal key
- The large range of finished bores available ensures that an immediate assembly can be made thus avoiding costly factory down-time.
- Here are the dimensions of Taper Bushing with type 1210 (30.25)
- - Bore : we provide taper bushing with minimal bore 12 mm and 5/8 inches; for the max bore you can look at the number writen after "BC" in every product name.
- for example, BC3025F12 (1210X12MM), so the max bore is 30 mm.
- - Width : the numbers writen in every product name before "F" is width size.
- for example, BC3025F12 (1210X12MM), so the width is 25 mm.
- - Bore size : look at the last number in every product name.
- for example, BC3025F12, so the bore size is 12.
[Please login to see price]
Ask Quote
Available
.png)
SIT
- Taper Bush : 2012
- Shaft Diameter Range : 15 - 50 mm
- Pitch Diameter : 170 mm
- Outside Diameter : 177 mm
- Groove : 2
[Please login to see price]
Ask Quote
Available
SIT
- SIT TAPER LOCK BUSHING is designed to give the following:
- 1. Perfect assembly
- 2. rapid dismantling of the pulley and other transmission equipment
- 3. No special tools requirement except hexagonal key
- The large range of finished bores available ensures that an immediate assembly can be made thus avoiding costly factory down-time.
- Here are the dimensions of Taper Bushing with type 1610 (40.25)
- - Bore : we provide taper bushing with minimal bore 12 mm and 3/8 inches; for the max bore you can look at the number writen after "BC" in every product name.
- for example, BC4025F12 (1610X12MM), so the max bore is 40 mm.
- - Width : the numbers writen in every product name before "F" is width size.
- for example, BC4025F12 (1610X12MM), so the width is 25 mm.
- - Bore size : look at the last number in every product name.
- for example, BC4025F12, so the bore size is 12.
[Please login to see price]
Ask Quote
Available
Available
