• Of this series both single and double joints are available.Types E are with sliding bushes while type H has needle roller bearings. 
•  
• Joints with plain bearings are available in 2 versions :
• - Types E to DIN 808;
• - Type EB to DIN 808/7551
•  
• Precision joint series "E" (DIN 808) wear resistant sliding bushes from cemented and hardened steel. Strong, precise, and versatile; wide application field.
•  
• Here are the dimension of product : 
• Outside diameter : 22 mm
• Inner diameter : 10 mm
• Length of half joint : 24 mm
• Full length : 28  mm 

• TRASCO flexible couplings is the flexible and omocinetic coupling that assures the best performance in relation to the physical space occupied in its class. It has a very compact design and allows safe power transmision by absorbing peak loads and torsional vibrations.
•  
• Product detail 
• Outside diameter : 95 mm
• Max bore : 42 mm
• Material : Cast iron grade GG25 
•  
• Approved according to EC standard ATEX 94/9/EC

No description for this product yet.

No description for this product yet.

• SIT TAPER LOCK BUSHING is designed to give the following:
• 1. Perfect assembly
• 2. rapid dismantling of the pulley and other transmission equipment
• 3. No special tools requirement except hexagonal key
•  
• The large range of finished bores available ensures that an immediate assembly can be made thus avoiding costly factory down-time.
•  
•  
• Here are the dimensions of Taper Bushing with type 2012 (50.30)
• - Bore : we provide taper bushing with minimal bore 14 mm and 5/8 inches; for the max bore you can look at the number writen after "BC" in every product name. 
• for example, BC5030F14 (2012X14MM), so the max bore is 50 mm.
• - Width : the numbers writen in every product name before "F" is width size.
• for example, BC5030F14 (2012X14MM), so the width is 30 mm.
• - Bore size : look at the last number in every product name. 
• for example, BC5030F14, so the bore size is 14.

Sprocket for chain according to DIN 8187 - ISO/R 606

D_e : External Diameter   mm

D_p : Pitch Diameter        mm

D_m : Hub Diameter        mm

W  :  Weight                  kg

No description for this product yet.

• Inner Diameter : 75 mm
• Outside Diameter : 115 mm
• High : 78 mm
• Screws : 10
• Type of Screws : M10

• Inner Diameter : 85 mm
• Outside Diameter : 125 mm
• High : 78 mm
• Screws : 12
• Type of Screws : M10

• SIT TAPER LOCK BUSHING is designed to give the following:
• 1. Perfect assembly
• 2. rapid dismantling of the pulley and other transmission equipment
• 3. No special tools requirement except hexagonal key
•  
• The large range of finished bores available ensures that an immediate assembly can be made thus avoiding costly factory down-time.
•  
•  
• Here are the dimensions of Taper Bushing with type 2517 (65.45)
• - Bore : we provide taper bushing with minimal bore 16 mm and 3/4 inches; for the max bore you can look at the number writen after "BC" in every product name. 
• for example, BC6545F16 (2517X16MM), so the max bore is 65 mm.
• - Width : the numbers writen in every product name before "F" is width size.
• for example, BC6545F16 (2517X16MM), so the width is 45 mm.
• - Bore size : look at the last number in every product name. 
• for example, BC6545F16, so the bore size is 16.

POWERLOCK locking assembly unit consists of four pieces with two inside double-one rings joined through a set of tightening screws. It is recomended for medium torques. Although it is not self centering, it can be easily assembled and diassembled.

• METALDRIVE® couplings are fully made of steel and are used in all applications where high reliablity, precision, and no maintenance are required.
•  
• METALDRIVE® GMD typw "S" are standard version with single disc pack. The couplings allows axial and angular misalignment. No radial misalignment is allowed. 
•  
• Here are the dimension of the product :
• Outside diameter : 182 mm 
• Inner diameter : 80 mm 
• Length : 174 mm 
• Screw : 6 
• Type of screw : M10

No description for this product yet.

• SIT-LOCK® 8 has a very small axial dimension, is self centering and has been designed to suit various shaft diameters although the overall dimensions are the same. SIT-LOCK® 8 is recommended for applications with medium torques which need a good axial positioning. The limited number of screws make the installation fast.
•  
• For the dimension of the product, please download the catalog in the document section.

Sprocket for chain according to DIN 8187 - ISO/R 606

D_e : External Diameter   mm

D_p : Pitch Diameter        mm

D_m : Hub Diameter        mm

W  :  Weight                  kg

• Type of belt : H
• Pitch : 12,700 mm
• Pitch diameter : 160.33 mm
• Outside diameter + flange: 168 mm 
• Teeth : 40
• Belt width : 1.50 inch
• Type of pulley : 2
• Material : Cast iron
• Flange : With flanges

• Inner Diameter : 130 mm
• Outside Diameter : 180 mm
• High : 54 mm
• Screws : 12 
• Type of Screws : M12

• Taper Bush : 2012
• Shaft Diameter Range : 14 - 50 mm
• Pitch Diameter : 112 mm
• Outside Diameter : 116 mm
• Groove : 6

No description for this product yet.

No description for this product yet.

No description for this product yet.

No description for this product yet.

No description for this product yet.

• SITEX® gear couplings consist of two toothed hubs which are connected with one internally toothed sleeve. The hubs are made of steel and the teeth, which are both profiled and section crowned, are obtained from milling. The sleeve is manufactured from stabilized 6.6 superpolymade resin.
•  
• Here are the dimensions of product :
• Outside diameter of sleeve : : 92mm 
• Outside diameter of the hub : 65mm 
• Total length : 88mm 
• Length of sleeve : 51mm