No description for this product yet.

• SITEX® gear couplings consist of two toothed hubs which are connected with one internally toothed sleeve. The hubs are made of steel and the teeth, which are both profiled and section crowned, are obtained from milling. The sleeve is manufactured from stabilized 6.6 superpolymade resin.
•  
• Here are the dimensions of product :
• Outside diameter of sleeve : : 175 mm 
• Outside diameter of the hub : 124 mm 
• Total length : 186 mm 
• Length of sleeve : 93 mm 

No description for this product yet.

No description for this product yet.

No description for this product yet.

Sprocket for chain according to DIN 8187 - ISO/R 606

D_e : External Diameter   mm

D_p : Pitch Diameter        mm

D_m : Hub Diameter        mm

W  :  Weight                  kg

No description for this product yet.

No description for this product yet.

No description for this product yet.

No description for this product yet.

• SIT TAPER LOCK BUSHING is designed to give the following:
• 1. Perfect assembly
• 2. rapid dismantling of the pulley and other transmission equipment
• 3. No special tools requirement except hexagonal key
•  
• The large range of finished bores available ensures that an immediate assembly can be made thus avoiding costly factory down-time.
•  
•  
• Here are the dimensions of Taper Bushing with type 1210 (30.25)
• - Bore : we provide taper bushing with minimal bore 12 mm and 5/8 inches; for the max bore you can look at the number writen after "BC" in every product name. 
• for example, BC3025F12 (1210X12MM), so the max bore is 30 mm.
• - Width : the numbers writen in every product name before "F" is width size.
• for example, BC3025F12 (1210X12MM), so the width is 25 mm.
• - Bore size : look at the last number in every product name. 
• for example, BC3025F12, so the bore size is 12.

• No Lubrication
• Easy Instalation
• No metal to metal contact
• Resistant to oil, dirt, sand, moisture, grease
• Easy inspection of load carrying spider
• Flexibility of angular or parallel misalignment of shafts by Bruna-N spider member permits smooth "power transmission"

POWERLOCK locking assembly unit consists of four pieces with two inside double-one rings joined through a set of tightening screws. It is recomended for medium torques. Although it is not self centering, it can be easily assembled and diassembled.

Sprocket for chain according to DIN 8187 - ISO/R 606

D_e : External Diameter   mm

D_p : Pitch Diameter        mm

D_m : Hub Diameter        mm

W  :  Weight                  kg

• POWERLOCK locking assembly unit consists of four pieces with two inside double-one rings joined through a set of tightening screws. It is recomended for medium torques. Although it is not self centering, it can be easily assembled and diassembled.
•  
•  
• Inner Diameter : 48 mm
• Outside Diameter : 80 mm
• High : 24 mm
• Screws : 12 
• Type of Screws : M8

• Taper Bush : 3020
• Shaft Diameter Range : 25 - 75 mm
• Pitch Diameter : 224 mm
• Outside Diameter : 231 mm
• Groove : 4

• Type of belt : AT5
• Pitch : 5 mm
• Pitch diameter : 46.55 mm
• Outside diameter + flange: 50 mm
• Teeth : 30
• Belt width : 16 mm
• Type of pulley : 2
• Material : Aluminium

• Type of belt : H
• Pitch : 12700 mm
• Pitch diameter : 95.65 mm
• Outside diameter + flange: 104 mm 
• Teeth : 24
• Belt width : 1.00 inch
• Type of pulley : 1
• Material : Steel
• Flange : With flanges

• Inner Diameter : 25 mm
• Outside Diameter : 50 mm
• High : 28 mm
• Screws : 6 
• Type of Screws : M6

• Type of belt : H
• Pitch : 12.700 mm
• Pitch diameter : 63.31 mm
• Outside diameter + flange: 67 mm
• Teeth : 16
• Type of bush : 1108; max bore : 28 mm
• Belt width : 1.50 inch
• Type of pulley : 4
• Material : Cast iron
• Flange : With flange 

• Inner Diameter : 55 mm
• Outside Diameter : 85 mm
• High : 33 mm
• Screws : 8
• Type of Screws : M8