TORQUE-FLEX® - Classical high performance belts are manufactured in accordance with European standards ISO 4184 and DIN 7753.
Designed for operating at high speeds over small diameter pulleys and short center distances. Also for use in multiple v-belt drives where high shock load and heavy-duty loads are encountered; compressors, industrial fans, textile machinery, woodworking machinery, and construction equipment.
Here are the product dimensions :
- Section : BX
- Belt width : 17 mm
- High belt : 11 mm
- Inside length : refer to the last number in every product names, for example : CTBX100, so the inside length is 100 inches.
SIT EXCELITE® ES - Narrow V-Belts are manufactured in accordance with ISO 4184 -and DIN 7753.
Our high performance narrow v-belts have been specially designed for heavy-duty applications to deliver up to 50% more power than classical v-belts. Can be used in a wide range of industrial and agricultural fields such as compressor, fans, pumps and the other heavy-duty equipment.
Here are the product dimension :
- Belt width : 13 mm
- High belt : 10 mm
- Inside length : refer to the last number in every product names, for example : CLSPA1000, so the inside length is 1000 mm.
The CLASSICA® synchronous belt, being designed with imperial pitch, is a valid and economical altenative solution in low/medium torque transmission systems.
Reduced elongation, no need of lubrication and low wearing makes this belt an economic and reliable option.
TOP DRIVE® HTD belt is an evolution of standard positive drive belts. The tooth shape is the HTD profile according to ISO 13050.
This profile has been used for many years in a wide range of applications and it is well known for its outstanding performances. Power transmission is much higher compared to the classic inch trapezodial profile.
The circular-arc tooth provides superior tooth jump resistance and provides a smooth tooth engagement. The noise level is remarkably reduced if compared to the classic trapezodial belts.
These heavy-duty synchronous belts are specifically designed for high power applications at high speed.
The specifically prepared tensile element in fiberglass provides an excellent dimensional stability preventing belt shrinkage or stretch under load.
The belt length is constant during operation allowing a perfect synchronization with the pulley. The result is a longer belt life and a lower energy consumption. The chloroprene compound provides good protection from oil, moisture and wear while the low friction polyamide fabric gives a long lasting teeth protection.
Here are the product dimension :
- Pitch length : the numbers writen in every product name after "CMS" is pitch length. For example, CMS1440-8M30, so the pitch length is 1440 mm.
- Width : refer to the last number in every product names, for example, CMS1440-8M30, so the inside length is 30 mm.
Locking elements consist of one internal and one external tapered rings. They are designed to work in combination with a clamp flange which can be bolted on a hub or shaft depending on application need.
Here are the dimensions of product :
Inner Diameter : refer to numbers writen after "F" in every product name. For example, CAL2F10/13; so, the inner diameter is 10 mm.
Outside Diameter : refer to the last number in every product name. For example, CAL2F10/13; so, the outside diameter is 13 mm.
SIT-LOCK® 8 has a very small axial dimension, is self centering and has been designed to suit various shaft diameters although the overall dimensions are the same. SIT-LOCK® 8 is recommended for applications with medium torques which need a good axial positioning. The limited number of screws make the installation fast.
For the dimension of the product, please download the catalog in the document section.