Sprocket for chain according to DIN 8187 - ISO/R 606

D_e : External Diameter   mm

D_p : Pitch Diameter        mm

D_m : Hub Diameter        mm

W  :  Weight                  kg

No description for this product yet.

• Hi-Performance Pd® Plus synchronous belts provide a reliable, economical, and trouble-free alternative to transmit power and reduce drive weight and cost when compared to classic V-belts. Lubrication and tensioning devices are not needed thus creating a cleaner, maintenance free synchronous drive. 
•  
• Hi-Performance Pd® Plus belts have been designed for performance exceeding the traditional limitation of the first generation of HTD belt drives. 
•  
• The product size : Example for HPPD 1040 P8M 20
• - !040 = Pitch length (mm)
• - P8M = Pitch 
• - 20 = Belt width (mm)

• Type of belt : H
• Pitch : 12.700 mm
• Pitch diameter : 55.23 mm
• Outside diameter + flange: 62 mm
• Teeth : 14
• Type of bush : 1108 ; max bore : 28 mm
• Belt width : 1.50 inch
• Type of pulley : 4
• Material : Cast iron
• Flange : With flange 

• Taper Bush : 2517
• Shaft Diameter Range : 18 - 65 mm
• Pitch Diameter : 180 mm
• Outside Diameter : 185.6 mm
• Groove : 3

• Taper Bush : 2012
• Shaft Diameter Range : 15 - 50 mm
• Pitch Diameter : 190 mm
• Outside Diameter : 195.6 mm
• Groove : 2

No description for this product yet.

• Type of belt : 8 M 
• Pitch : 8 mm
• Pitch diameter : 80.12 mm
• Outside diameter + flange : 88 mm 
• Teeth : 32
• Belt width : 20 mm
• Type of pulley : 1
• Material : Steel
• Flange : With flanges 

• Taper Bush : 2012
• Shaft Diameter Range : 15 - 50 mm
• Pitch Diameter : 200 mm
• Outside Diameter : 205.6 mm
• Groove : 1

No description for this product yet.

• Taper Bush : 2517
• Shaft Diameter Range : 18 - 65 mm
• Pitch Diameter : 236 mm
• Outside Diameter : 241.6 mm
• Groove : 3

Dimensions in milimeters:

Keyways are British Standard Metric B S 4235. Part 1: 1972 DIN 6885 and conform to ISO recomendations with the exception of those marked, which are shallower. Where a key is to be used it should be parallel and side fitting, with top clearance. Depth of keyway is measured at the CENTRE

• SIT TAPER LOCK BUSHING is designed to give the following:
• 1. Perfect assembly
• 2. rapid dismantling of the pulley and other transmission equipment
• 3. No special tools requirement except hexagonal key
•  
• The large range of finished bores available ensures that an immediate assembly can be made thus avoiding costly factory down-time.
•  
• Here are the dimensions of Taper Bushing with type 5050 (125.125)
• - Bore : we provide taper bushing with minimal bore 50 mm; for the max bore you can look at the number writen after "BC" in every product name. 
• for example, BC125125F100 (5050X100MM), so the max bore is 125 mm.
• - Width : the numbers writen in every product name before "F" is width size.
• for example, BC125125F100 (5050X100MM), so the width is 125 mm.
• - Bore size : look at the last number in every product name. 
• for example, BC125125F100, so the bore size is 100.

• Taper Bush : 3535
• Shaft Diameter Range : 55 - 100 mm
• Pitch Diameter : 400 mm
• Outside Diameter : 409.6 mm
• Groove : 5

• Type of belt : T5
• Pitch : 5 mm
• Pitch diameter : 42.20 mm
• Outside diameter + flange: 46 mm
• Teeth : 27
• Belt width : 16 mm
• Type of pulley : 2
• Material : Aluminium

No description for this product yet.

No description for this product yet.

• Type of belt : T5
• Pitch : 5 mm
• Pitch diameter : 24.60 mm
• Outside diameter + flange: 30 mm
• Teeth : 16
• Belt width : 25 mm
• Type of pulley : 2
• Material : Aluminium

• Our pulleys can be used for application with a speed up to 35m/s. The pulley dimensions are very accurate as they are manufactured only by means of CNC or automatic lathes. 
•  
• For higher speed is strongly recomended to use steel as material of construction. Our PBT pulleys are satically balanced according to ISO. 
•  
• The PT pulleys are not balanced, as they do not have a finished bores.
•  
• Here are the dimensions of "PBT" SPB with taper bush 1610 :
• - Belt type : SPB
• - Taperbush : 1610
• - Shaft diameter range : 12 - 42 mm
• - Pitch diameter : refer to numbers writen after "PBT" in every product name. 
• For example, product name : PBT100SPB1 (1610); so, the pitch diameter is 100 mm
• - Outside diameter : you can add the pitch diameter with 7 to know the length of outside diameter. 
• For example, the product is PBT100SPB1 (1610); so the outside diameter is 100 + 7 = 107 mm
• - Groove : refer to the last number in every product name. 
• For example for PBT100SPB1; so, the groove is 1
•  
• See recomendation taperbush below.

• SIT TAPER LOCK BUSHING is designed to give the following:
• 1. Perfect assembly
• 2. rapid dismantling of the pulley and other transmission equipment
• 3. No special tools requirement except hexagonal key
•  
• The large range of finished bores available ensures that an immediate assembly can be made thus avoiding costly factory down-time.
•  
• Here are the dimensions of Taper Bushing with type 1008 (25.20)
• - Bore : we provide taper bushing with minimal bore 9 mm and 3/8 inches; for the max bore you can look at the number writen after "BC" in every product name. 
• for example, BC2520F09 (1008X09MM), so the max bore is 25 mm.
• - Width : the numbers writen in every product name before "F" is width size.
• for example, BC2520F09 (1008X09MM), so the width is 20 mm.
• - Bore size : look at the last number in every product name. 
• for example, BC2520F09, so the bore size is 9.

• Type of belt : T5
• Pitch : 5 mm
• Pitch diameter : 50.10 mm
• Outside diameter + flange: 55 mm
• Teeth : 32
• Belt width : 25 mm
• Type of pulley : 2
• Material : Aluminium

No description for this product yet.

No description for this product yet.

No description for this product yet.