No description for this product yet.

• SIT TAPER LOCK BUSHING is designed to give the following:
• 1. Perfect assembly
• 2. rapid dismantling of the pulley and other transmission equipment
• 3. No special tools requirement except hexagonal key
•  
• The large range of finished bores available ensures that an immediate assembly can be made thus avoiding costly factory down-time.
•  
•  
• Here are the dimensions of Taper Bushing with type 1610 (40.25)
• - Bore : we provide taper bushing with minimal bore 12 mm and 3/8 inches; for the max bore you can look at the number writen after "BC" in every product name. 
• for example, BC4025F12 (1610X12MM), so the max bore is 40 mm.
• - Width : the numbers writen in every product name before "F" is width size.
• for example, BC4025F12 (1610X12MM), so the width is 25 mm.
• - Bore size : look at the last number in every product name. 
• for example, BC4025F12, so the bore size is 12.

• POWERLOCK locking assembly unit consists of four pieces with two inside double-one rings joined through a set of tightening screws. It is recomended for medium torques. Although it is not self centering, it can be easily assembled and diassembled.
•  
•  
• Inner Diameter : 240 mm
• Outside Diameter : 305 mm
• High : 56 mm
• Screws : 30
• Type of Screws : M16

No description for this product yet.

• SIT TAPER LOCK BUSHING is designed to give the following:
• 1. Perfect assembly
• 2. rapid dismantling of the pulley and other transmission equipment
• 3. No special tools requirement except hexagonal key
•  
• The large range of finished bores available ensures that an immediate assembly can be made thus avoiding costly factory down-time.
•  
•  
• Here are the dimensions of Taper Bushing with type 1610 (40.25)
• - Bore : we provide taper bushing with minimal bore 12 mm and 3/8 inches; for the max bore you can look at the number writen after "BC" in every product name. 
• for example, BC4025F12 (1610X12MM), so the max bore is 40 mm.
• - Width : the numbers writen in every product name before "F" is width size.
• for example, BC4025F12 (1610X12MM), so the width is 25 mm.
• - Bore size : look at the last number in every product name. 
• for example, BC4025F12, so the bore size is 12.

• No Lubrication
• Easy Instalation
• No metal to metal contact
• Resistant to oil, dirt, sand, moisture, grease
• Easy inspection of load carrying spider
• Flexibility of angular or parallel misalignment of shafts by Bruna-N spider member permits smooth "power transmission"

No description for this product yet.

• Taper Bush : 2517 
• Shaft Diameter Range : 18 - 65 mm
• Pitch Diameter : 200 mm
• Outside Diameter : 207 mm
• Groove : 3

• SIT TAPER LOCK BUSHING is designed to give the following:
• 1. Perfect assembly
• 2. rapid dismantling of the pulley and other transmission equipment
• 3. No special tools requirement except hexagonal key
•  
• The large range of finished bores available ensures that an immediate assembly can be made thus avoiding costly factory down-time.
•  
•  
• Here are the dimensions of Taper Bushing with type 2012 (50.30)
• - Bore : we provide taper bushing with minimal bore 14 mm and 5/8 inches; for the max bore you can look at the number writen after "BC" in every product name. 
• for example, BC5030F14 (2012X14MM), so the max bore is 50 mm.
• - Width : the numbers writen in every product name before "F" is width size.
• for example, BC5030F14 (2012X14MM), so the width is 30 mm.
• - Bore size : look at the last number in every product name. 
• for example, BC5030F14, so the bore size is 14.

• SIT TAPER LOCK BUSHING is designed to give the following:
• 1. Perfect assembly
• 2. rapid dismantling of the pulley and other transmission equipment
• 3. No special tools requirement except hexagonal key
•  
• The large range of finished bores available ensures that an immediate assembly can be made thus avoiding costly factory down-time.
•  
•  
• Here are the dimensions of Taper Bushing with type 2012 (50.30)
• - Bore : we provide taper bushing with minimal bore 14 mm and 5/8 inches; for the max bore you can look at the number writen after "BC" in every product name. 
• for example, BC5030F14 (2012X14MM), so the max bore is 50 mm.
• - Width : the numbers writen in every product name before "F" is width size.
• for example, BC5030F14 (2012X14MM), so the width is 30 mm.
• - Bore size : look at the last number in every product name. 
• for example, BC5030F14, so the bore size is 14.

• SIT TAPER LOCK BUSHING is designed to give the following:
• 1. Perfect assembly
• 2. rapid dismantling of the pulley and other transmission equipment
• 3. No special tools requirement except hexagonal key
•  
• The large range of finished bores available ensures that an immediate assembly can be made thus avoiding costly factory down-time.
•  
•  
• Here are the dimensions of Taper Bushing with type 2012 (50.30)
• - Bore : we provide taper bushing with minimal bore 14 mm and 5/8 inches; for the max bore you can look at the number writen after "BC" in every product name. 
• for example, BC5030F14 (2012X14MM), so the max bore is 50 mm.
• - Width : the numbers writen in every product name before "F" is width size.
• for example, BC5030F14 (2012X14MM), so the width is 30 mm.
• - Bore size : look at the last number in every product name. 
• for example, BC5030F14, so the bore size is 14.

POWERLOCK locking assembly unit consists of four pieces with two inside double-one rings joined through a set of tightening screws. It is recomended for medium torques. Although it is not self centering, it can be easily assembled and diassembled.

• SIT TAPER LOCK BUSHING is designed to give the following:
• 1. Perfect assembly
• 2. rapid dismantling of the pulley and other transmission equipment
• 3. No special tools requirement except hexagonal key
•  
• The large range of finished bores available ensures that an immediate assembly can be made thus avoiding costly factory down-time.
•  
•  
• Here are the dimensions of Taper Bushing with type 2517 (65.45)
• - Bore : we provide taper bushing with minimal bore 16 mm and 3/4 inches; for the max bore you can look at the number writen after "BC" in every product name. 
• for example, BC6545F16 (2517X16MM), so the max bore is 65 mm.
• - Width : the numbers writen in every product name before "F" is width size.
• for example, BC6545F16 (2517X16MM), so the width is 45 mm.
• - Bore size : look at the last number in every product name. 
• for example, BC6545F16, so the bore size is 16.

• No Lubrication
• Easy Instalation
• No metal to metal contact
• Resistant to oil, dirt, sand, moisture, grease
• Easy inspection of load carrying spider
• Flexibility of angular or parallel misalignment of shafts by Bruna-N spider member permits smooth "power transmission"

• POWERLOCK locking assembly unit consists of four pieces with two inside double-one rings joined through a set of tightening screws. It is recomended for medium torques. Although it is not self centering, it can be easily assembled and diassembled.
•  
•  
• Inner Diameter : 55 mm
• Outside Diameter : 85 mm
• High : 24 mm
• Screws : 14  
• Type of Screws : M8

• SIT TAPER LOCK BUSHING is designed to give the following:
• 1. Perfect assembly
• 2. rapid dismantling of the pulley and other transmission equipment
• 3. No special tools requirement except hexagonal key
•  
• The large range of finished bores available ensures that an immediate assembly can be made thus avoiding costly factory down-time.
•  
•  
• Here are the dimensions of Taper Bushing with type 2012 (50.30)
• - Bore : we provide taper bushing with minimal bore 14 mm and 5/8 inches; for the max bore you can look at the number writen after "BC" in every product name. 
• for example, BC5030F14 (2012X14MM), so the max bore is 50 mm.
• - Width : the numbers writen in every product name before "F" is width size.
• for example, BC5030F14 (2012X14MM), so the width is 30 mm.
• - Bore size : look at the last number in every product name. 
• for example, BC5030F14, so the bore size is 14.

• Inner Diameter : 140 mm
• Outside Diameter : 190 mm
• High : 114 mm
• Screws : 14
• Type of Screws : M14