All Products 21162
Call us
[Please login to see price]
Call us
[Please login to see price]
Call us
[Please login to see price]
Call us
R+W
SERVICE LIFE
R+W Couplings are fatigue resistant and wear free for an infinite service life, as long as the technical limits are not exceeded.
SPECIAL SOLUTIONS
SPECIAL SOLUTIONS
Various materials, tolerances, dimensions and performance ratings available for custom applications on request
FIT CLEARANCE
FIT CLEARANCE
Overall shaft/hub clearance of 0.03 - 0.08 mm
TEMPERATURE RANGE
-40 to + 300° C
ATEX ( Optional)
ATEX ( Optional)
For use in hazardous areas available upon request
[Please login to see price]
Ask Quote
Call us
.png)
SIT
- Taper Bush : 4040
- Shaft Diameter Range : 55 - 100 mm
- Pitch Diameter : 710 mm
- Outside Diameter : 719.6 mm
- Groove : 3
[Please login to see price]
Ask Quote
Call us
STARKZ
Our pulleys can be used for application with a speed up to 35m/s. The pulley dimensions are very accurate as they are manufactured only by means of CNC or automatic lathes. For higher speed is strongly recomended to use steel as material of construction.
Our PBT pulleys are statically balanced according to ISO.
The PT pulleys are not balanced, as they do not have a finished bores.
[Please login to see price]
Ask Quote
Call us
SIT
- Taper Bush : 4040
- Shaft Diameter Range : 55 - 100 mm
- Pitch Diameter : 560 mm
- Outside Diameter : 567 mm
- Groove : 8
[Please login to see price]
Ask Quote
Call us
SIT
- Type of belt : H
- Pitch : 12700 mm
- Pitch diameter : 136.08 mm
- Outside diameter + flange: 142 mm
- Teeth : 34
- Type of bush : 2012; max bore : 50 mm
- Belt width : 2.00 inch
- Type of pulley : 4
- Material : Cast iron
- Flange : With flanges
[Please login to see price]
Ask Quote
Call us
STARKZ
Our pulleys can be used for application with a speed up to 35m/s. The pulley dimensions are very accurate as they are manufactured only by means of CNC or automatic lathes. For higher speed is strongly recomended to use steel as material of construction.
Our PBT pulleys are statically balanced according to ISO.
The PT pulleys are not balanced, as they do not have a finished bores.
[Please login to see price]
Ask Quote
Call us
Call us
Call us
.png)
SIT
- Taper Bush : 3020
- Shaft Diameter Range : 25 - 75 mm
- Pitch Diameter : 236 mm
- Outside Diameter : 241.6 mm
- Groove : 4
[Please login to see price]
Ask Quote
Call us
SIT
- TOP DRIVE® HTD belt is an evolution of standard positive drive belts. The tooth shape is the HTD profile according to ISO 13050.
- This profile has been used for many years in a wide range of applications and it is well known for its outstanding performances. Power transmission is much higher compared to the classic inch trapezodial profile.
- The circular-arc tooth provides superior tooth jump resistance and provides a smooth tooth engagement. The noise level is remarkably reduced if compared to the classic trapezodial belts.
- How to measure the size of a product :
- For example, CHD1064-8M20
- - 1640 = pitch length (mm)
- - 8M = pitch
- - 20 = belt width (mm)
[Please login to see price]
Ask Quote
Call us
SIT
- Taper Bush : 4545
- Shaft Diameter Range : 70 - 125 mm
- Pitch Diameter : 710 mm
- Outside Diameter : 717 mm
- Groove : 8
[Please login to see price]
Ask Quote
Call us
Call us
Call us
Call us
Call us
Call us
Call us
Call us
Call us
Call us
Call us
LINNGEAR
Idler Sprockets : Ball bearing idler sprocket have sealed ball bearing with extended inner race and setscrews for securing to shaft.
Ready Sprockets : An assortment of sprockets and hubs drilled and tapped for simple, convertient assembly with standard hex head cap screws.
Finished Bore Sprockets : No. 35 through No. 80 with standard keyway and setscrew. Many sizes stocked both with and without induction hardened teeth.
[Please login to see price]
Ask Quote
