• POWERLOCK locking assembly unit consists of four pieces with two inside double-one rings joined through a set of tightening screws. It is recomended for medium torques. Although it is not self centering, it can be easily assembled and diassembled.
•  
•  
• Inner Diameter : 40 mm
• Outside Diameter : 65 mm
• High : 20 mm
• Screws : 14 
• Type of Screws : M6

No description for this product yet.

• Type of belt : L
• Pitch : 9525 mm
• Pitch diameter : 41.69 mm
• Outside diameter + flange: 46
• Teeth : 14
• Belt width : 0.75 inch
• Type of pulley : 1
• Material : Steel
• Flange : With flanges

No description for this product yet.

No description for this product yet.

• SIT TAPER LOCK BUSHING is designed to give the following:
• 1. Perfect assembly
• 2. rapid dismantling of the pulley and other transmission equipment
• 3. No special tools requirement except hexagonal key
•  
• The large range of finished bores available ensures that an immediate assembly can be made thus avoiding costly factory down-time.
•  
•  
• Here are the dimensions of Taper Bushing with type 2012 (50.30)
• - Bore : we provide taper bushing with minimal bore 14 mm and 5/8 inches; for the max bore you can look at the number writen after "BC" in every product name. 
• for example, BC5030F14 (2012X14MM), so the max bore is 50 mm.
• - Width : the numbers writen in every product name before "F" is width size.
• for example, BC5030F14 (2012X14MM), so the width is 30 mm.
• - Bore size : look at the last number in every product name. 
• for example, BC5030F14, so the bore size is 14.

• POWERLOCK locking assembly unit consists of four pieces with two inside double-one rings joined through a set of tightening screws. It is recomended for medium torques. Although it is not self centering, it can be easily assembled and diassembled.
•  
•  
• Inner Diameter : 80 mm
• Outside Diameter : 120 mm
• High : 28 mm
• Screws : 14 
• Type of Screws : M10

• POWERLOCK locking assembly unit consists of four pieces with two inside double-one rings joined through a set of tightening screws. It is recomended for medium torques. Although it is not self centering, it can be easily assembled and diassembled.
•  
•  
• Inner Diameter : 120 mm
• Outside Diameter : 165 mm
• High : 33 mm
• Screws : 16
• Type of Screws : M12

Sprocket for chain according to DIN 8187 - ISO/R 606

D_e : External Diameter   mm

D_p : Pitch Diameter        mm

D_m : Hub Diameter        mm

W  :  Weight                  kg

• SIT TAPER LOCK BUSHING is designed to give the following:
• 1. Perfect assembly
• 2. rapid dismantling of the pulley and other transmission equipment
• 3. No special tools requirement except hexagonal key
•  
• The large range of finished bores available ensures that an immediate assembly can be made thus avoiding costly factory down-time.
•  
•  
• Here are the dimensions of Taper Bushing with type 1215 (30.40)
• - Bore : we provide taper bushing with minimal bore 11 mm and 1 inches; for the max bore you can look at the number writen after "BC" in every product name. 
• for example, BC3040F11 (1215X11MM), so the max bore is 30 mm.
• - Width : the numbers writen in every product name before "F" is width size.
• for example, BC3040F11 (1215X11MM), so the width is 40 mm.
• - Bore size : look at the last number in every product name. 
• for example, BC3040F11, so the bore size is 11.

No description for this product yet.

No description for this product yet.

No description for this product yet.

No description for this product yet.

• Type of belt : 8 M 
• Pitch :  8 mm
• Pitch diameter : 59.74 mm
• Outside diameter + flange : 67 mm
• Teeth : 24
• Type of bush : 1108
• Belt width : 20 mm
• Type of pulley :4
• Material : Cast iron
• Flange : With flanges 

• SITEX® gear couplings consist of two toothed hubs which are connected with one internally toothed sleeve. The hubs are made of steel and the teeth, which are both profiled and section crowned, are obtained from milling. The sleeve is manufactured from stabilized 6.6 superpolymade resin.
•  
• Here are the dimensions of product :
• Outside diameter of sleeve : : 66 mm 
• Outside diameter of the hub : 43 mm 
• Total length : 84 mm 
• Length of sleeve : 47mm 

No description for this product yet.

• POWERLOCK locking assembly unit consists of four pieces with two inside double-one rings joined through a set of tightening screws. It is recomended for medium torques. Although it is not self centering, it can be easily assembled and diassembled.
•  
•  
• Inner Diameter : 28 mm
• Outside Diameter : 55 mm
• High : 20 mm
• Screws : 10 
• Type of Screws : M6

• Type of belt : H
• Pitch : 12700 mm
• Pitch diameter : 59.27 mm
• Outside diameter + flange: 67
• Teeth : 15
• Belt width : 1.50 inch
• Type of pulley : 1
• Material : Steel
• Flange : With flanges

No description for this product yet.

No description for this product yet.

• Type of belt : T5
• Pitch : 5 mm
• Pitch diameter : 24.60 mm
• Outside diameter + flange: 30 mm
• Teeth : 16
• Belt width : 10 mm
• Type of pulley : 2
• Material : Aluminium