All Products 21140
- SIT TAPER LOCK BUSHING is designed to give the following:
- 1. Perfect assembly
- 2. rapid dismantling of the pulley and other transmission equipment
- 3. No special tools requirement except hexagonal key
- The large range of finished bores available ensures that an immediate assembly can be made thus avoiding costly factory down-time.
- Here are the dimensions of Taper Bushing with type 4040 (100.100)
- - Bore : we provide taper bushing with minimal bore 40 mm; for the max bore you can look at the number writen after "BC" in every product name.
- for example, BC100100F100 (4040X100MM), so the max bore is 100 mm.
- - Width : the numbers writen in every product name before "F" is width size.
- for example, BC100100F100 (4040X100MM), so the width is 100 mm.
- - Bore size : look at the last number in every product name.
- for example, BC100100F100, so the bore size is 100.
Sprocket for chain according to DIN 8187 - ISO/R 606
De : External Diameter mm
Dp : Pitch Diameter mm
Dm : Hub Diameter mm
W : Weight kg
Sprocket for chain according to DIN 8187 - ISO/R 606
De : External Diameter mm
Dp : Pitch Diameter mm
Dm : Hub Diameter mm
W : Weight kg
.png)
- Taper Bush : 2012
- Shaft Diameter Range : 15 - 50 mm
- Pitch Diameter : 125 mm
- Outside Diameter : 129 mm
- Groove : 4
- Type of belt : H
- Pitch : 12700 mm
- Pitch diameter : 180.54 mm
- Outside diameter + flange: 189 mm
- Teeth : 45
- Type of bush : 2012; max bore : 50 mm
- Belt width : 1.00 inch
- Type of pulley : 7
- Material : Cast iron
- Flange : With flanges
.png)
- Taper Bush : 3535
- Shaft Diameter Range : 45 - 90 mm
- Pitch Diameter : 450 mm
- Outside Diameter : 459.6 mm
- Groove : 4
Dimensions in milimeters:
Keyways are British Standard Metric B S 4235. Part 1: 1972 DIN 6885 and conform to ISO recomendations with the exception of those marked, which are shallower. Where a key is to be used it should be parallel and side fitting, with top clearance. Depth of keyway is measured at the CENTRE
Sprocket for chain according to DIN 8187 - ISO/R 606
De : External Diameter mm
Dp : Pitch Diameter mm
Dm : Hub Diameter mm
W : Weight kg
- SITEX® gear couplings consist of two toothed hubs which are connected with one internally toothed sleeve. The sleeve is manufactured from stabilized 6.6 superpolyamide resin.
- The torsional rigidity of the sleeve prevents angular speed variation. The combination of steel hubs with polyamide sleeve makes the coupling maintenance and lubrication free.
- The particular toothed profile prevents contact of tooth edged with the sleeve, ensuring long life of the coupling.
- Here are the dimensions of product :
- Outside diameter : 52 mm
- Length : 41 mm
- Locking assembly with single taper design. Provides good concentricity and is self centering.
- SITLOCK® 6 is suitable for applications with medium torques.
- For the dimension of the product, please download the catalog in the document section.
- SITEX® gear couplings consist of two toothed hubs which are connected with one internally toothed sleeve. The sleeve is manufactured from stabilized 6.6 superpolyamide resin.
- The torsional rigidity of the sleeve prevents angular speed variation. The combination of steel hubs with polyamide sleeve makes the coupling maintenance and lubrication free.
- The particular toothed profile prevents contact of tooth edged with the sleeve, ensuring long life of the coupling.
- Here are the dimensions of product :
- Outside diameter : 76 mm
- Length : 48 mm
- SITEX® gear couplings consist of two toothed hubs which are connected with one internally toothed sleeve. The sleeve is manufactured from stabilized 6.6 superpolyamide resin.
- The torsional rigidity of the sleeve prevents angular speed variation. The combination of steel hubs with polyamide sleeve makes the coupling maintenance and lubrication free.
- The particular toothed profile prevents contact of tooth edged with the sleeve, ensuring long life of the coupling.
- Here are the dimensions of product :
- Outside diameter : 142 mm
- Length : 73 mm
The special OPTIGEAR profile allows very high torque transmission and the compensation of axal, angular and radial misalignment (only in the version with 2 hubs). The maximum recommended working temperature is -10 °C a + 80 °C.
SITEX® ST type "C" are standard type with 2 hubs and one sleeve. Offers compact, powerful design, and easy assembly.
Here are the dimension of product :
- Outside diameter of the hub : 40 mm
- Length of hub : 41 mm
Sprocket for chain according to DIN 8187 - ISO/R 606
De : External Diameter mm
Dp : Pitch Diameter mm
Dm : Hub Diameter mm
W : Weight kg
The special OPTIGEAR profile allows very high torque transmission and the compensation of axal, angular and radial misalignment (only in the version with 2 hubs). The maximum recommended working temperature is -10 °C a + 80 °C.
SITEX® ST type "C" are standard type with 2 hubs and one sleeve. Offers compact, powerful design, and easy assembly.
Here are the dimension of product :
- Outside diameter of sleeve : : 70 mm
- Length of sleeve : 61 mm
.png)
- Taper Bush : 1610
- Shaft Diameter Range : 12 - 42 mm
- Pitch Diameter : 112 mm
- Outside Diameter : 119 mm
- Groove : 3
.jpg)
- Type of belt : T10
- Pitch : 10 mm
- Pitch diameter : 49.05 mm
- Outside diameter + flange: 55 mm
- Teeth : 16
- Belt width : 16 mm
- Type of pulley : 2
- Material : Aluminium
- Type of belt : T10
- Pitch : 10 mm
- Pitch diameter : 55.45 mm
- Outside diameter + flange: 62 mm
- Teeth : 18
- Belt width : 16 mm
- Type of pulley : 2
- Material : Aluminium
