No description for this product yet.

Sprocket for chain according to DIN 8187 - ISO/R 606

D_e : External Diameter   mm

D_p : Pitch Diameter        mm

D_m : Hub Diameter        mm

W  :  Weight                  kg

• SIT TAPER LOCK BUSHING is designed to give the following:
• 1. Perfect assembly
• 2. rapid dismantling of the pulley and other transmission equipment
• 3. No special tools requirement except hexagonal key
•  
• The large range of finished bores available ensures that an immediate assembly can be made thus avoiding costly factory down-time.
•  
•  
• Here are the dimensions of Taper Bushing with type 2517 (65.45)
• - Bore : we provide taper bushing with minimal bore 16 mm and 3/4 inches; for the max bore you can look at the number writen after "BC" in every product name. 
• for example, BC6545F16 (2517X16MM), so the max bore is 65 mm.
• - Width : the numbers writen in every product name before "F" is width size.
• for example, BC6545F16 (2517X16MM), so the width is 45 mm.
• - Bore size : look at the last number in every product name. 
• for example, BC6545F16, so the bore size is 16.

• SIT EXCELITE® ES belts are manufactured in according with ISO 4184 and DIN 2215.
•  
• Due to the special insulation filler and the treatment of the tensile members, we are able to achieve a strong adhesion between cords and rubber base.
•  
• For this reason EXCELITE® ES belts can be used in a wide range of industrial and agricultural applications and guarantee high reliability and long lifetime. 
•  
• Here are the product dimension : 
• - Belt width : 16 mm 
• - High belt : 11 mm
• - Inside length : refer to the last number in every product names, for example : CLB23, so the inside length is 23inches

Sprocket for chain according to DIN 8187 - ISO/R 606

D_e : External Diameter   mm

D_p : Pitch Diameter        mm

D_m : Hub Diameter        mm

W  :  Weight                  kg

No description for this product yet.

• METALDRIVE® couplings are fully made of steel and are used in all applications where high reliablity, precision, and no maintenance are required.
•  
• METALDRIVE® GMD typw "S" are standard version with single disc pack. The couplings allows axial and angular misalignment. No radial misalignment is allowed. 
•  
• Here are the dimension of the product :
• Outside diameter : 112 mm 
• Inner diameter : 45 mm 
• Length : 100 mm 
• Screw : 6 
• Type of screw : M6

• Taper Bush : 3535
• Shaft Diameter Range : 45 - 90 mm
• Pitch Diameter : 400 mm
• Outside Diameter : 407 mm
• Groove : 6

• METALDRIVE® couplings are fully made of steel and are used in all applications where high reliablity, precision, and no maintenance are required.
•  
• METALDRIVE® GMD typw "S" are standard version with single disc pack. The couplings allows axial and angular misalignment. No radial misalignment is allowed. 
•  
• Here are the dimension of the product :
• Outside diameter : 112 mm 
• Inner diameter : 45 mm 
• Length : 100 mm 
• Screw : 6 
• Type of screw : M6

No description for this product yet.

• Inner Diameter : 240 mm
• Outside Diameter : 305 mm
• High : 146 mm
• Screws : 22
• Type of Screws : M16

• SIT-LOCK® locking assembly unit consists of four pieces with two inside double-one rings joined through a set of tightening screws. It is recomended for medium torques. Although it is not self centering, it can be easily assembled and diassembled.
•  
• Here are the dimensions of product :
• Inner Diameter : refer to numbers writen after "F" in every product name. For example, CAL1F20/47; so, the inner diameter is 20 mm. 
• Outside Diameter : refer to the last number in every product name. For example, CAL1F20/47; so, the outside diameter is 47 mm. 
• High : 20 mm
• Screws : 8
• Type of Screws : M6

• TRASCO® ES is our zero backlash coupling designed to compensate for misalignment and vibration dampening for indexing applications. The compact design of TRASCO® ES makes it the right choice for all precise motion applications.
•  
• SIT coupling hubs are available from stock with either solid hub or with finished bores of standard shaft diameters. 
•  
• Product detail 
• Outside diameter : 80 mm
• Max bore : 45 mm
• Material : Aluminum 
•  
• Approved according to EC standard ATEX 94/9/EC.

No description for this product yet.

• Type of belt : H
• Pitch : 12700 mm
• Pitch diameter : 79.48 mm
• Outside diameter + flange: 88 mm 
• Teeth : 20
• Belt width : 2.00 inch
• Type of pulley : 1
• Material : Steel
• Flange : With flanges

• Taper Bush : 3020
• Shaft Diameter Range : 25 - 75 mm
• Pitch Diameter : 250 mm
• Outside Diameter : 259.6 mm
• Groove : 3

Sprocket for chain according to DIN 8187 - ISO/R 606

D_e : External Diameter   mm

D_p : Pitch Diameter        mm

D_m : Hub Diameter        mm

W  :  Weight                  kg

• Taper Bush : 1610
• Shaft Diameter Range : 12 - 42 mm
• Pitch Diameter : 112 mm
• Outside Diameter : 117.6 mm
• Groove : 1

• Type of belt : AT5
• Pitch : 5 mm
• Pitch diameter : 62.45 mm
• Outside diameter + flange: 67 mm
• Teeth : 40 
• Belt width : 10 mm
• Type of pulley : 2
• Material : Aluminium

• SIT TAPER LOCK BUSHING is designed to give the following:
• 1. Perfect assembly
• 2. rapid dismantling of the pulley and other transmission equipment
• 3. No special tools requirement except hexagonal key
•  
• The large range of finished bores available ensures that an immediate assembly can be made thus avoiding costly factory down-time.
•  
•  
• Here are the dimensions of Taper Bushing with type 4545 (115.115)
• - Bore : we provide taper bushing with minimal bore 55 mm; and maximal bore 110 mm. 
• - Width : the numbers writen in every product name before "F" is width size.
• for example, BC115115F100 (4545X100MM), so the width is 115 mm.
• - Bore size : look at the last number in every product name. 
• for example, BC115115F100, so the bore size is 100.

• Type of belt : L
• Pitch : 9.525 mm
• Pitch diameter : 53.81 mm
• Outside diameter + flange: 62 mm
• Teeth : 18
• Type of bush : 1108; max bore : 28 mm
• Belt width : 0.50 inch
• Type of pulley : 1
• Material : Cast iron
• Flange : With flange 

No description for this product yet.

No description for this product yet.

Sprocket for chain according to DIN 8187 - ISO/R 606

D_e : External Diameter   mm

D_p : Pitch Diameter        mm

D_m : Hub Diameter        mm

W  :  Weight                  kg