• Type of belt : XL
• Pitch : 5080 mm
• Pitch diameter : 72.26 mm
• Outside diameter + flange: -
• Teeth : 45
• Belt width : 0.37 inch
• Type of pulley : 1
• Material : Aluminium
• Flange : Without flanges

• SITEX® gear couplings consist of two toothed hubs which are connected with one internally toothed sleeve. The hubs are made of steel and the teeth, which are both profiled and section crowned, are obtained from milling. The sleeve is manufactured from stabilized 6.6 superpolymade resin.
•  
• Coupling are available from stock, both the standard and the "long" hub execution, which entirely covers the motor shaft.
•  
• Here are the dimensions of couplings with"long" hub execution :
• Outside diameter of sleeve : : 52 mm 
• Outside diameter of the hub : 35 mm 
• Total length : 104 mm 
• Length of sleeve : 41 mm 

• Taper Bush : 2517
• Shaft Diameter Range : 18 - 65 mm
• Pitch Diameter : 160 mm
• Outside Diameter : 167 mm
• Groove : 4

• Type of belt : L
• Pitch : 9525 mm
• Pitch diameter : 62.91 mm
• Outside diameter + flange: 67 mm 
• Teeth : 21
• Belt width : 0.50 inch
• Type of pulley : 1
• Material : Steel
• Flange : With flanges

• Type of belt : L
• Pitch : 9525 mm
• Pitch diameter : 75.04 mm
• Outside diameter + flange: 80 mm 
• Teeth : 25
• Belt width : 0.50 inch
• Type of pulley : 1
• Material : Steel
• Flange : With flanges

• HTD pulleys have a different design from the traditional toothed pulleys. The axial grooves are designed to allow the beltteeth to catch the pulley teeth with negligible triction. HTD Pulleys are available with full hub and for assembly with SER-SIT taper bushing.
•  
• Product detail : 
•  
• Type of belt : 8 M 
• Pitch :  8 mm
• Pitch diameter : 161.60 mm
• Outside diameter + flange : 168 mm
• Teeth : 64
• Type of bush : 2517
• Belt width : 30 mm
• Type of pulley :2
• Material : Cast iron
• Flange : With flanges 

• Type of belt : T10
• Pitch : 10 mm
• Pitch diameter : 112.75 mm
• Outside diameter + flange: 118 mm
• Teeth : 36
• Belt width : 32 mm
• Type of pulley : 2
• Material : Aluminium

• No Lubrication
• Easy Instalation
• No metal to metal contact
• Resistant to oil, dirt, sand, moisture, grease
• Easy inspection of load carrying spider
• Flexibility of angular or parallel misalignment of shafts by Bruna-N spider member permits smooth "power transmission"

• HTD pulleys have a different design from the traditional toothed pulleys. The axial grooves are designed to allow the beltteeth to catch the pulley teeth with negligible triction. HTD Pulleys are available with full hub and for assembly with SER-SIT taper bushing.
•  
•  
• Product detail : 
•  
• Type of belt : 8 M 
• Pitch :  8 mm
• Pitch diameter : 110.67 mm
• Outside diameter + flange : 121 mm
• Teeth : 44
• Type of bush : 2012
• Belt width : 50 mm
• Type of pulley :2
• Material : Cast iron
• Flange : With flanges 

• No Lubrication
• Easy Instalation
• No metal to metal contact
• Resistant to oil, dirt, sand, moisture, grease
• Easy inspection of load carrying spider
• Flexibility of angular or parallel misalignment of shafts by Bruna-N spider member permits smooth "power transmission"

• HTD pulleys have a different design from the traditional toothed pulleys. The axial grooves are designed to allow the beltteeth to catch the pulley teeth with negligible triction. HTD Pulleys are available with full hub and for assembly with SER-SIT taper bushing.
•  
• Product detail 
• Type of belt : 8 M 
• Pitch :  8 mm
• Pitch diameter : 202.35 mm
• Outside diameter + flange : -
• Teeth : 80
• Type of bush : 3020
• Belt width : 50 mm
• Type of pulley : 7 
• Material : Cast iron
• Flange : Without flanges 

• Type of belt : L
• Pitch : 9525 mm
• Pitch diameter : 32.59 mm
• Outside diameter + flange: 36
• Teeth : 11
• Belt width : 0.50 inch
• Type of pulley : 1
• Material : Steel
• Flange : With flanges

• Type of belt : L
• Pitch : 9525 mm
• Pitch diameter : 56.84 mm
• Outside diameter + flange: 62 mm 
• Teeth : 19
• Belt width : 0.75 inch
• Type of pulley : 1
• Material : Steel
• Flange : With flanges

• TRASCO® couplings are dimensionally manufactured to hub types "A" and "B", the difference being the maximum shaft diameter which hubs can accpet (corresponding respectively to the first and second code number). The long hub execution "L" (allows full coverage of the motor shaft) is available in both "A" and "B" execution.
•  
• Product detail 
• Outside diameter : 65 mm
• Max bore : 38 mm
• Length : 180 mm 
• Material : Cast iron grade GG25 
•  
• Approved according to EC standard ATEX 94/9/EC

• POWERLOCK locking assembly unit consists of four pieces with two inside double-one rings joined through a set of tightening screws. It is recomended for medium torques. Although it is not self centering, it can be easily assembled and diassembled.
•  
•  
• Inner Diameter : 24 mm
• Outside Diameter : 50 mm
• High : 20 mm
• Screws : 8 
• Type of Screws : M6

• SIT TAPER LOCK BUSHING is designed to give the following:
• 1. Perfect assembly
• 2. rapid dismantling of the pulley and other transmission equipment
• 3. No special tools requirement except hexagonal key
•  
• The large range of finished bores available ensures that an immediate assembly can be made thus avoiding costly factory down-time.
•  
•  
• Here are the dimensions of Taper Bushing with type 1615 (40.40)
• - Bore : we provide taper bushing with minimal bore 12 mm and 1/2 inches; for the max bore you can look at the number writen after "BC" in every product name. 
• for example, BC4040F12 (1615X12MM), so the max bore is 40 mm.
• - Width : the numbers writen in every product name before "F" is width size.
• for example, BC4040F12 (1615X12MM), so the width is 40 mm.
• - Bore size : look at the last number in every product name. 
• for example, BC4040F12, so the bore size is 12.

No description for this product yet.

• Type of belt : L
• Pitch : 9,525 mm
• Pitch diameter : 102.32 mm
• Outside diameter + flange: 108 mm 
• Teeth : 34
• Belt width : 0.50 inch
• Type of pulley : 1
• Material : Cast iron
• Flange : With flanges

No description for this product yet.

• Type of belt : AT5
• Pitch : 5 mm
• Pitch diameter : 30.60 mm
• Outside diameter + flange: 33 mm
• Teeth : 20
• Belt width : 10 mm
• Type of pulley : 2
• Material : Aluminium

Sprocket for chain according to DIN 8187 - ISO/R 606

D_e : External Diameter   mm

D_p : Pitch Diameter        mm

D_m : Hub Diameter        mm

W  :  Weight                  kg

No description for this product yet.

No description for this product yet.

• Taper Bush : 3020
• Shaft Diameter Range : 25 - 75 mm
• Pitch Diameter : 236 mm
• Outside Diameter : 243 mm
• Groove : 4