• The CLASSICA® synchronous belt, being designed with imperial pitch, is a valid and economical altenative solution in low/medium torque transmission systems. 
•  
• Reduced elongation, no need of lubrication and low wearing makes this belt an economic and reliable option. 
•  
• How to measure the size of a product : 
• For example, CD210L075
• - 210 = pitch length x 10 (inches) 
• - L = pitch 
• - 75 = belt width x 100 (inches) 

No description for this product yet.

No description for this product yet.

• TOP DRIVE® HTD belt is an evolution of standard positive drive belts. The tooth shape is the HTD profile according to ISO 13050.
•  
• This profile has been used for many years in a wide range of applications and it is well known for its outstanding performances. Power transmission is much higher compared to the classic inch trapezodial profile. 
•  
• The circular-arc tooth provides superior tooth jump resistance and provides a smooth tooth engagement. The noise level is remarkably reduced if compared to the classic trapezodial belts.
•  
• How to measure the size of a product : 
• For example, CHD1064-8M20 
• - 1640 = pitch length (mm)
• - 8M = pitch 
• - 20 = belt width (mm)

• MUSTANG® SPEED-SUPER TORQUE synchronous belts combine the construction of the construction of the MUSTANG® SPEED and the tooth profile of the SUPER TORQUE.
•  
• The result is power rating two times higher compared to first generation of SUPER TORQUE.
•  
•  Execution with Aramid tensile members is also available for high torque at low speed applications.
•  
• Here are the product dimension : 
• - Pitch length : the numbers writen in every product name after "CMST" is pitch length. For example, CMST1240-S8M20, so the pitch length is 1240 mm. 
• - Width : refer to the last number in every product names, for example, CMST1240-S8M20, so the inside length is 20 mm.
• - Pitch : 8 M
• - Teeth no. : 155

• Type of belt : S 8 M 
• Pitch :  8 mm
• Pitch diameter : 80.12 mm
• Outside diameter + flange : 88 mm
• Teeth : 32
• Belt width : refer to the last number in every product name. (example : ST32-S8M20, so the belt width is 20 mm) 
• Type of pulley : 1
• Material : Steel
• Flange : With flanges 

• Type of belt : S 8 M 
• Pitch :  8 mm
• Pitch diameter : 95.39 mm
• Outside diameter + flange : 104 mm
• Teeth : 38
• Belt width : 20 mm
• Taper bush : 1615
• Type of pulley : 4
• Material : Cast iron
• Flange : With flanges 

• Locking assembly with single taper design. It is suitable for high torques. Provide good concentricity and self centring. 
•  
• For the dimension of the product, please download the catalog in the document section.

• Shrink discs are external locking devices which are installed over hub projections. By locking the screws, radial pressures act on the hub allowing an effective and solid connection.
• Recommended for medium and high torque. For SIT-LOCK® is also available in "SPLIT" and "HALF" for special applications.
•  
• For the dimension of the product, please download the catalog in the document section

No description for this product yet.

No description for this product yet.

No description for this product yet.

No description for this product yet.

No description for this product yet.

No description for this product yet.

• Type of belt : H
• Pitch : 12700 mm
• Pitch diameter : 483.73 mm
• Outside diameter + flange: - 
• Teeth : 120
• Belt width : 1.00 inch
• Type of pulley : 5
• Material : Cast iron
• Flange : Without flanges

• Extensible transmission high speed series "H" (DIN 808) 
•  
• High speed joints series "H", type "HA", with needle roller bearings.
• Special executions on request.
•  
• Here are the dimension of product : 
• Outside diameter : 70 mm 
• Inner diameter : 35 mm 
• Length of half joint : 140 mm 
• Full length : Min. and max. length upon request 

No description for this product yet.

• MUSTANG® SPEED-SUPER TORQUE synchronous belts combine the construction of the construction of the MUSTANG® SPEED and the tooth profile of the SUPER TORQUE.
•  
• The result is power rating two times higher compared to first generation of SUPER TORQUE.
•  
•  Execution with Aramid tensile members is also available for high torque at low speed applications.
•  
• Here are the product dimension : 
• - Pitch length : the numbers writen in every product name after "CMST" is pitch length. For example, CMST1240-S8M20, so the pitch length is 1240 mm. 
• - Width : refer to the last number in every product names, for example, CMST1240-S8M20, so the inside length is 20 mm.
• - Pitch : 8 M
• - Teeth no. : 103

No description for this product yet.

No description for this product yet.

No description for this product yet.

No description for this product yet.

No description for this product yet.