No description for this product yet.

No description for this product yet.

No description for this product yet.

No description for this product yet.

SITEX gear couplings of two toothed hubs which are connected with one internally toothed sleeve. The hubs are made of steel and teeth, which are both profiled and section crowned, are milled. The sleeve is manufactured from stabilized 6.6 superpolymade resin.

• Taper Bush : 1610
• Shaft Diameter Range : 12 - 42 mm
• Pitch Diameter : 125 mm
• Outside Diameter : 130.6 mm
• Groove : 1

No description for this product yet.

No description for this product yet.

No description for this product yet.

• The special OPTIGEAR profile allows very high torque transmission and the compensation of axal, angular and radial misalignment (only in the version with 2 hubs). The maximum recommended working temperature is -10 °C a + 80 °C.
•  
• SITEX® ST type "C" are standard type with 2 hubs and one sleeve. Offers compact, powerful design, and easy assembly. 
•  
• Here are the dimension of product : 
• Outside diameter of the hub : 150 mm 
• Outside diameter of the sleeve : 198 mm 
• Full length : 216 mm 
• Length of sleeve : 130 mm 

• TORQUE-FLEX® - Narrow "XP" high performance belts are manufactured in accordance with European standards ISO 4184, DIN 7753 and are approved by API (American Petroleum Institute). 
•  
• The belt structure guarantees high transmittable power while the moulded cog profile provides higher flexibility with small diameters pulleys. 
•  
• Here are the product dimension : 
• - Section : XPA
• - Belt width : 13 mm 
• - High belt : 10 mm
• - Datum length : refer to the last number in every product names, for example : CSXPA1000, so the inside length is 1000 mm, 

• TORQUE-FLEX® - Classical high performance belts are manufactured in accordance with European standards ISO 4184 and DIN 7753. 
•  
• Designed for operating at high speeds over small diameter pulleys and short center distances. Also for use in multiple v-belt drives where high shock load and heavy-duty loads are encountered; compressors, industrial fans, textile machinery, woodworking machinery, and construction equipment. 
•  
• Here are the product dimensions : 
• - Section : AX
• - Belt width : 13 mm
• - High belt : 8 mm
• - Inside length : refer to the last number in every product names, for example : CTAX100, so the inside length is 100 inches. 

• TORQUE-FLEX® - Classical high performance belts are manufactured in accordance with European standards ISO 4184 and DIN 7753. 
•  
• Designed for operating at high speeds over small diameter pulleys and short center distances. Also for use in multiple v-belt drives where high shock load and heavy-duty loads are encountered; compressors, industrial fans, textile machinery, woodworking machinery, and construction equipment. 
•  
• Here are the product dimensions : 
• - Section : ZX
• - Belt width : 10 mm
• - High belt : 6 mm
• - Inside length : refer to the last number in every product names, for example : CTZX18, so the inside length is 18 inches. 

No description for this product yet.

No description for this product yet.

• The CLASSICA® synchronous belt, being designed with imperial pitch, is a valid and economical altenative solution in low/medium torque transmission systems. 
•  
• Reduced elongation, no need of lubrication and low wearing makes this belt an economic and reliable option. 
•  
• How to measure the size of a product : 
• For example, CD210L075
• - 210 = pitch length x 10 (inches) 
• - L = pitch 
• - 75 = belt width x 100 (inches) 

• The CLASSICA® synchronous belt, being designed with imperial pitch, is a valid and economical altenative solution in low/medium torque transmission systems. 
•  
• Reduced elongation, no need of lubrication and low wearing makes this belt an economic and reliable option. 
•  
• How to measure the size of a product : 
• For example, CD210L075
• - 210 = pitch length x 10 (inches) 
• - L = pitch 
• - 75 = belt width x 100 (inches) 

• The CLASSICA® synchronous belt, being designed with imperial pitch, is a valid and economical altenative solution in low/medium torque transmission systems. 
•  
• Reduced elongation, no need of lubrication and low wearing makes this belt an economic and reliable option. 
•  
• How to measure the size of a product : 
• For example, CD210L075
• - 210 = pitch length x 10 (inches) 
• - L = pitch 
• - 75 = belt width x 100 (inches) 

• Hi-Performance Pd® Plus synchronous belts provide a reliable, economical, and trouble-free alternative to transmit power and reduce drive weight and cost when compared to classic V-belts. Lubrication and tensioning devices are not needed thus creating a cleaner, maintenance free synchronous drive. 
•  
• Hi-Performance Pd® Plus belts have been designed for performance exceeding the traditional limitation of the first generation of HTD belt drives. 
•  
• The product size : Example for HPPD 1040 P8M 20
• - !040 = Pitch length (mm)
• - P8M = Pitch 
• - 20 = Belt width (mm)

No description for this product yet.

• TOP DRIVE® HTD belt is an evolution of standard positive drive belts. The tooth shape is the HTD profile according to ISO 13050.
•  
• This profile has been used for many years in a wide range of applications and it is well known for its outstanding performances. Power transmission is much higher compared to the classic inch trapezodial profile. 
•  
• The circular-arc tooth provides superior tooth jump resistance and provides a smooth tooth engagement. The noise level is remarkably reduced if compared to the classic trapezodial belts.
•  
• How to measure the size of a product : 
• For example, CHD1064-8M20 
• - 1640 = pitch length (mm)
• - 8M = pitch 
• - 20 = belt width (mm)

No description for this product yet.

• SIT TAPER LOCK BUSHING is designed to give the following:
• 1. Perfect assembly
• 2. rapid dismantling of the pulley and other transmission equipment
• 3. No special tools requirement except hexagonal key
•  
• The large range of finished bores available ensures that an immediate assembly can be made thus avoiding costly factory down-time.
•  
•  
• Here are the dimensions of Taper Bushing with type 2517 (65.45)
• - Bore : we provide taper bushing with minimal bore 16 mm and 3/4 inches; for the max bore you can look at the number writen after "BC" in every product name. 
• for example, BC6545F16 (2517X16MM), so the max bore is 65 mm.
• - Width : the numbers writen in every product name before "F" is width size.
• for example, BC6545F16 (2517X16MM), so the width is 45 mm.
• - Bore size : look at the last number in every product name. 
• for example, BC6545F16, so the bore size is 16.

• Type of belt : S 8 M 
• Pitch :  8 mm
• Pitch diameter : 212.53 mm
• Outside diameter + flange : - 
• Teeth : 84
• Belt width : refer to the last number in product name (for example, ST80-ST80-S8M20, so, the belt width is 20mm) 
• Type of pulley : 6
• Material : Cast iron
• Flange : Without flanges