• Hi-Performance Pd® Plus synchronous belts provide a reliable, economical, and trouble-free alternative to transmit power and reduce drive weight and cost when compared to classic V-belts. Lubrication and tensioning devices are not needed thus creating a cleaner, maintenance free synchronous drive. 
•  
• Hi-Performance Pd® Plus belts have been designed for performance exceeding the traditional limitation of the first generation of HTD belt drives. 
•  
• The product size : Example for HPPD 1040 P8M 20
• - !040 = Pitch length (mm)
• - P8M = Pitch 
• - 20 = Belt width (mm)

No description for this product yet.

• TOP DRIVE® HTD belt is an evolution of standard positive drive belts. The tooth shape is the HTD profile according to ISO 13050.
•  
• This profile has been used for many years in a wide range of applications and it is well known for its outstanding performances. Power transmission is much higher compared to the classic inch trapezodial profile. 
•  
• The circular-arc tooth provides superior tooth jump resistance and provides a smooth tooth engagement. The noise level is remarkably reduced if compared to the classic trapezodial belts.
•  
• How to measure the size of a product : 
• For example, CHD1064-8M20 
• - 1640 = pitch length (mm)
• - 8M = pitch 
• - 20 = belt width (mm)

No description for this product yet.

• SIT TAPER LOCK BUSHING is designed to give the following:
• 1. Perfect assembly
• 2. rapid dismantling of the pulley and other transmission equipment
• 3. No special tools requirement except hexagonal key
•  
• The large range of finished bores available ensures that an immediate assembly can be made thus avoiding costly factory down-time.
•  
•  
• Here are the dimensions of Taper Bushing with type 3020 (75.50)
• - Bore : we provide taper bushing with minimal bore 22 mm and 1-1/4 inches; for the max bore you can look at the number writen after "BC" in every product name. 
• for example, BC7550F22 (3020X22MM), so the max bore is 75 mm.
• - Width : the numbers writen in every product name before "F" is width size.
• for example, BC7550F22 (3020X22MM), so the width is 50 mm.
• - Bore size : look at the last number in every product name. 
• for example, BC7550F22, so the bore size is 22.

• Type of belt : S 8M 
• Pitch :  8 mm
• Pitch diameter : 365.69 mm
• Outside diameter + flange : -
• Teeth : 144
• Belt width : 30 mm
• Type of pulley : 5
• Material : Cast iron
• Flange : Without flanges 

• JUBOFLEX® elastic coupling for mounting SERSIT® taper bushing, consist of : 
•  
• - One elastic element made of pre-compressed, natural rubber, reinforced with steel to be fitted with fixing screws and a metallic band.
• - Two metallic hubs made of forged steel.
• - Two SER-SIT® taper bush from size 4 to 25;
•  
• Here are the dimensions of product :
• Type of taper bushing : 2012 (50.30)
• Diameter of the bore : 11 - 32 mm 
• Full outside diamteter : 117 mm 
• Hub outside diameter : 60 mm 
• Length : 90 mm 

• Locking assembly with single taper design. It is suitable for high torques. Provide good concentricity and self centring. 
• It is recommended for medium torques and is self-centering. The flange design prevent axial movement during installation. 
•  
• For the dimension of the product, please download the catalog in the document section.

• Shrink discs are external locking devices which are installed over hub projections. By locking the screws, radial pressures act on the hub allowing an effective and solid connection.
• Recommended for medium and high torque. For SIT-LOCK® is also available in "SPLIT" and "HALF" for special applications.
•  
• For the dimension of the product, please download the catalog in the document section

No description for this product yet.

• Taper Bush : 5050
• Shaft Diameter Range : 70 - 125 mm
• Pitch Diameter : 560 mm
• Outside Diameter : 569.6 mm
• Groove : 8

No description for this product yet.

No description for this product yet.

No description for this product yet.

No description for this product yet.

No description for this product yet.

• Type of belt : H
• Pitch : 12.700 mm
• Pitch diameter : 427.14 mm
• Outside diameter + flange : - 
• Teeth : 106
• Type of bush : 2517 ; max bore : 65 mm
• Belt width : 2.00 inch
• Type of pulley : 15
• Material : Cast iron
• Flange : Without flange 

No description for this product yet.

No description for this product yet.

No description for this product yet.

No description for this product yet.

No description for this product yet.

No description for this product yet.

No description for this product yet.