All Products 20223
Call us
[Please login to see price]
Call us
[Please login to see price]
Call us
Call us
SIT
- SIT TAPER LOCK BUSHING is designed to give the following:
- 1. Perfect assembly
- 2. rapid dismantling of the pulley and other transmission equipment
- 3. No special tools requirement except hexagonal key
- The large range of finished bores available ensures that an immediate assembly can be made thus avoiding costly factory down-time.
- Here are the dimensions of Taper Bushing with type 3020 (75.50)
- - Bore : we provide taper bushing with minimal bore 22 mm and 1-1/4 inches; for the max bore you can look at the number writen after "BC" in every product name.
- for example, BC7550F22 (3020X22MM), so the max bore is 75 mm.
- - Width : the numbers writen in every product name before "F" is width size.
- for example, BC7550F22 (3020X22MM), so the width is 50 mm.
- - Bore size : look at the last number in every product name.
- for example, BC7550F22, so the bore size is 22.
[Please login to see price]
Ask Quote
Call us
SIT
- Type of belt : S 8 M
- Pitch : 8 mm
- Pitch diameter : 85.21 mm
- Outside diameter + flange : 94 mm
- Teeth : 34
- Belt width : refer to the last number in every product name. (example : ST34-S8M20, so the belt width is 20 mm)
- Type of pulley : 1
- Material : Steel
- Flange : With flanges
[Please login to see price]
Ask Quote
Call us
SIT
- METALDRIVE® couplings are fully made of steel and are used in all applications where high reliablity, precision, and no maintenance are required.
- METALDRIVE® GMD typw "S" are standard version with single disc pack. The couplings allows axial and angular misalignment. No radial misalignment is allowed.
- Here are the dimension of the product :
- Outside diameter : 352 mm
- Inner diameter : 155 mm
- Length : 332 mm
- Screw : 8
- Type of screw : M24
[Please login to see price]
Ask Quote
Call us
SIT
- Locking assembly with single taper design. It is suitable for high torques. Provide good concentricity and self centring.
- It is recommended for medium torques and is self-centering. The flange design prevent axial movement during installation.
- For the dimension of the product, please download the catalog in the document section.
[Please login to see price]
Ask Quote
Call us
SIT
- SIT-LOCK® 12 is self-centering unit and convenient series. It is suggested for large quantities in applications with medium torques.
- Here are the dimensions of product :
- Inner Diameter : refer to numbers writen after "F" in every product name. For example, CAL12F18/40; so, the inner diameter is 18 mm.
- Outside Diameter : refer to the last number in every product name. For example, CAL12F18/40; so, the outside diameter is 40 mm.
- High : 20 mm
- Screws : 7
- Type of Screws : M4
[Please login to see price]
Ask Quote
Call us
Call us
Call us
Call us
Call us
SIT
- Type of belt : H
- Pitch : 12700 mm
- Pitch diameter : 107.78 mm
- Outside diameter + flange: 113 mm
- Teeth : 27
- Type of bush : 2012; max bore : 50 mm
- Belt width : 3.00 inch
- Type of pulley : 3
- Material : Cast iron
- Flange : With flange
[Please login to see price]
Ask Quote
Call us
Call us
SIT
- Precision joints series "ER" (sliding bushes)
- - Type "ER" : max. speed 1.000 rpm.
- - Type "HR": max. speed 4.000 rpm
- - Max. angle 45°
- Here are the dimension of product :
- Outside diameter : 50 mm
- Inner diameter : 25 mm
- Length of half joint : 66 mm
- Full length : 132 mm
[Please login to see price]
Ask Quote
Call us
Call us
Call us
Call us
Call us
Call us
