No description for this product yet.

• SIT TAPER LOCK BUSHING is designed to give the following:
• 1. Perfect assembly
• 2. rapid dismantling of the pulley and other transmission equipment
• 3. No special tools requirement except hexagonal key
•  
• The large range of finished bores available ensures that an immediate assembly can be made thus avoiding costly factory down-time.
•  
•  
• Here are the dimensions of Taper Bushing with type 1615 (40.40)
• - Bore : we provide taper bushing with minimal bore 12 mm and 1/2 inches; for the max bore you can look at the number writen after "BC" in every product name. 
• for example, BC4040F12 (1615X12MM), so the max bore is 40 mm.
• - Width : the numbers writen in every product name before "F" is width size.
• for example, BC4040F12 (1615X12MM), so the width is 40 mm.
• - Bore size : look at the last number in every product name. 
• for example, BC4040F12, so the bore size is 12.

• TRASCO® couplings are dimensionally manufactured to hub types "A" and "B", the difference being the maximum shaft diameter which hubs can accpet (corresponding respectively to the first and second code number). The long hub execution "L" (allows full coverage of the motor shaft) is available in both "A" and "B" execution.
•  
• Product detail 
• Outside diameter : 105 mm
• Max bore : 60 mm
• Length : 308 mm 
• Material : Cast iron grade GG25 
•  
• Approved according to EC standard ATEX 94/9/EC

• POWERLOCK locking assembly unit consists of four pieces with two inside double-one rings joined through a set of tightening screws. It is recomended for medium torques. Although it is not self centering, it can be easily assembled and diassembled.
•  
•  
• Inner Diameter : 25 mm
• Outside Diameter : 50 mm
• High : 20 mm
• Screws : 8 
• Type of Screws : M6

• Type of belt : 8 M 
• Pitch : 8 mm
• Pitch diameter : 141.23 mm
• Outside diameter + flange : 149 mm
• Teeth : 56
• Belt width : 50 mm
• Type of pulley : 8
• Material : Cast iron
• Flange : With flanges 

No description for this product yet.

• Type of belt : L
• Pitch : 9525 mm
• Pitch diameter : 81.10 mm
• Outside diameter + flange: 88 mm 
• Teeth : 27
• Belt width : 0.75 inch
• Type of pulley : 1
• Material : Steel
• Flange : With flanges

Sprocket for chain according to DIN 8187 - ISO/R 606

D_e : External Diameter   mm

D_p : Pitch Diameter        mm

D_m : Hub Diameter        mm

W  :  Weight                  kg

• Type of belt : L
• Pitch : 9525 mm
• Pitch diameter : 105.35 mm
• Outside diameter + flange: 113 mm 
• Teeth : 35
• Belt width : 0.75 inch
• Type of pulley : 1
• Material : Cast iron
• Flange : With flanges

• SIT EXCELITE® ES belts are manufactured in according with ISO 4184 and DIN 2215.
•  
• Due to the special insulation filler and the treatment of the tensile members, we are able to achieve a strong adhesion between cords and rubber base.
•  
• For this reason EXCELITE® ES belts can be used in a wide range of industrial and agricultural applications and guarantee high reliability and long lifetime. 
•  
• Here are the product dimension : 
• - Belt width : 16 mm 
• - High belt : 11 mm
• - Inside length : refer to the last number in every product names, for example : CLB23, so the inside length is 23inches

No description for this product yet.

No description for this product yet.

No description for this product yet.

• Locking assembly with single taper design. Consists of two tapered rings and a spacer. It has minimum overall dimensions in virtue of the reduced thickness of the cones.
• SIT-LOCK® 3 is suitable for the applications where small hubs are requested. It is recommended for mid-high torques and is self centering. 
•  
• For the dimension of the product, please download the catalog in the document section

No description for this product yet.

• SIT TAPER LOCK BUSHING is designed to give the following:
• 1. Perfect assembly
• 2. rapid dismantling of the pulley and other transmission equipment
• 3. No special tools requirement except hexagonal key
•  
• The large range of finished bores available ensures that an immediate assembly can be made thus avoiding costly factory down-time.
•  
•  
• Here are the dimensions of Taper Bushing with type 2012 (50.30)
• - Bore : we provide taper bushing with minimal bore 14 mm and 5/8 inches; for the max bore you can look at the number writen after "BC" in every product name. 
• for example, BC5030F14 (2012X14MM), so the max bore is 50 mm.
• - Width : the numbers writen in every product name before "F" is width size.
• for example, BC5030F14 (2012X14MM), so the width is 30 mm.
• - Bore size : look at the last number in every product name. 
• for example, BC5030F14, so the bore size is 14.

Sprocket for chain according to DIN 8187 - ISO/R 606

D_e : External Diameter   mm

D_p : Pitch Diameter        mm

D_m : Hub Diameter        mm

W  :  Weight                  kg

Sprocket for chain according to DIN 8187 - ISO/R 606

D_e : External Diameter   mm

D_p : Pitch Diameter        mm

D_m : Hub Diameter        mm

W  :  Weight                  kg

Sprocket for chain according to DIN 8187 - ISO/R 606

D_e : External Diameter   mm

D_p : Pitch Diameter        mm

D_m : Hub Diameter        mm

W  :  Weight                  kg

No description for this product yet.

• Locking assembly with single taper design. Consists of two tapered rings and a spacer. It has minimum overall dimensions in virtue of the reduced thickness of the cones.
• SIT-LOCK® 3 is suitable for the applications where small hubs are requested. It is recommended for mid-high torques and is self centering. 
•  
• For the dimension of the product, please download the catalog in the document section