• TORQUE-FLEX® - Classical high performance belts are manufactured in accordance with European standards ISO 4184 and DIN 7753. 
•  
• Designed for operating at high speeds over small diameter pulleys and short center distances. Also for use in multiple v-belt drives where high shock load and heavy-duty loads are encountered; compressors, industrial fans, textile machinery, woodworking machinery, and construction equipment. 
•  
• Here are the product dimensions : 
• - Section : ZX
• - Belt width : 10 mm
• - High belt : 6 mm
• - Inside length : refer to the last number in every product names, for example : CTZX18, so the inside length is 18 inches. 

No description for this product yet.

No description for this product yet.

• The CLASSICA® synchronous belt, being designed with imperial pitch, is a valid and economical altenative solution in low/medium torque transmission systems. 
•  
• Reduced elongation, no need of lubrication and low wearing makes this belt an economic and reliable option. 
•  
• How to measure the size of a product : 
• For example, CD210L075
• - 210 = pitch length x 10 (inches) 
• - L = pitch 
• - 75 = belt width x 100 (inches) 

No description for this product yet.

• The CLASSICA® synchronous belt, being designed with imperial pitch, is a valid and economical altenative solution in low/medium torque transmission systems. 
•  
• Reduced elongation, no need of lubrication and low wearing makes this belt an economic and reliable option. 
•  
• How to measure the size of a product : 
• For example, CD210L075
• - 210 = pitch length x 10 (inches) 
• - L = pitch 
• - 75 = belt width x 100 (inches) 

No description for this product yet.

• TOP DRIVE® HTD belt is an evolution of standard positive drive belts. The tooth shape is the HTD profile according to ISO 13050.
•  
• This profile has been used for many years in a wide range of applications and it is well known for its outstanding performances. Power transmission is much higher compared to the classic inch trapezodial profile. 
•  
• The circular-arc tooth provides superior tooth jump resistance and provides a smooth tooth engagement. The noise level is remarkably reduced if compared to the classic trapezodial belts.
•  
• How to measure the size of a product : 
• For example, CHD1064-8M20 
• - 1640 = pitch length (mm)
• - 8M = pitch 
• - 20 = belt width (mm)

• TOP DRIVE® HTD belt is an evolution of standard positive drive belts. The tooth shape is the HTD profile according to ISO 13050.
•  
• This profile has been used for many years in a wide range of applications and it is well known for its outstanding performances. Power transmission is much higher compared to the classic inch trapezodial profile. 
•  
• The circular-arc tooth provides superior tooth jump resistance and provides a smooth tooth engagement. The noise level is remarkably reduced if compared to the classic trapezodial belts.
•  
• How to measure the size of a product : 
• For example, CHD1064-8M20 
• - 1640 = pitch length (mm)
• - 8M = pitch 
• - 20 = belt width (mm)

No description for this product yet.

• SIT TAPER LOCK BUSHING is designed to give the following:
• 1. Perfect assembly
• 2. rapid dismantling of the pulley and other transmission equipment
• 3. No special tools requirement except hexagonal key
•  
• The large range of finished bores available ensures that an immediate assembly can be made thus avoiding costly factory down-time.
•  
•  
• Here are the dimensions of Taper Bushing with type 3535 (90.90)
•  
• - Bore : we provide taper bushing with minimal bore 25 mm; for the max bore you can look at the number writen after "BC" in every product name. 
• for example, BC9090F25 (3535X25MM) so the max bore is 90 mm.
• - Width : the numbers writen in every product name before "F" is width size.
• for example, BC9090F25 (3535X25MM), so the width is 90 mm.
• - Bore size : look at the last number in every product name. 
• for example, BC9090F25, so the bore size is 25.

• Type of belt : S 8 M 
• Pitch :  8 mm
• Pitch diameter : 120.86 mm
• Outside diameter + flange : 129 mm
• Teeth : 48
• Belt width : refer to the last number in every product name. (example : ST48-S8M20, so the belt width is 20mm) 
• Type of pulley : 1
• Material : Cast iron
• Flange : With flanges 

No description for this product yet.

• Locking assembly with single taper design. Provides good concentricity and is self centering. 
• SITLOCK® 6 is suitable for applications with medium torques.
•  
• For the dimension of the product, please download the catalog in the document section.

• SIT-LOCK® 13 is very close to the standard type SIT-LOCK® 9, but it is manufactured in a longer execution. It is made of two tapered rings and locking nut. 
•  
• For the dimension of the product, please download the catalog in the document section

No description for this product yet.

No description for this product yet.

No description for this product yet.

No description for this product yet.

No description for this product yet.

No description for this product yet.

• Type of belt : H
• Pitch : 12700 mm
• Pitch diameter : 605.01 mm
• Outside diameter + flange: -
• Teeth : 150
• Belt width : 2.00 inch
• Type of pulley : 5
• Material : Cast iron
• Flange : Without flanges

• TRASCO flexible couplings is the flexible and omocinetic coupling that assures the best performance in relation to the physical space occupied in its class. It has a very compact design and allows safe power transmision by absorbing peak loads and torsional vibrations.
•  
• Spider detail 
• Color : Green
• Shore : 64 Sh.D
• Compound : Polyurethane 
• Admissible Temperature [°C] : from - 30 to + 110 (on work)
•  

• Protection muffis series "M" are special neoprene rubber. 
•  
• Resistant to acids, oils, grease, dust, and moisture. Filled with grease to ensure constant lubrication.
•  
• Here are the dimension of product : 
• Outside diameter : 92 mm 
• Inner diameter : 50 mm
• Length : 108 mm