All Products 20212
Call us
[Please login to see price]
Call us
[Please login to see price]
Call us
[Please login to see price]
Call us
SIT
- SIT TAPER LOCK BUSHING is designed to give the following:
- 1. Perfect assembly
- 2. rapid dismantling of the pulley and other transmission equipment
- 3. No special tools requirement except hexagonal key
- The large range of finished bores available ensures that an immediate assembly can be made thus avoiding costly factory down-time.
- Here are the dimensions of Taper Bushing with type 3535 (90.90)
- - Bore : we provide taper bushing with minimal bore 25 mm; for the max bore you can look at the number writen after "BC" in every product name.
- for example, BC9090F25 (3535X25MM) so the max bore is 90 mm.
- - Width : the numbers writen in every product name before "F" is width size.
- for example, BC9090F25 (3535X25MM), so the width is 90 mm.
- - Bore size : look at the last number in every product name.
- for example, BC9090F25, so the bore size is 25.
[Please login to see price]
Ask Quote
Call us
SIT
- Type of belt : S 8 M
- Pitch : 8 mm
- Pitch diameter : 141.23 mm
- Outside diameter + flange : 149 mm
- Teeth : 56
- Belt width : refer to the last number in every product name. (example : ST56-S8M50, so the belt width is 50mm)
- Type of pulley : 1
- Material : Cast iron
- Flange : With flanges
[Please login to see price]
Ask Quote
Call us
SIT
- SIT-LOCK® locking assembly unit consists of four pieces with two inside double-one rings joined through a set of tightening screws. It is recomended for medium torques. Although it is not self centering, it can be easily assembled and diassembled.
- Here are the dimensions of product :
- Inner Diameter : refer to numbers writen after "F" in every product name. For example, CAL1F20/47; so, the inner diameter is 20 mm.
- Outside Diameter : refer to the last number in every product name. For example, CAL1F20/47; so, the outside diameter is 47 mm.
- High : 20 mm
- Screws : 8
- Type of Screws : M6
[Please login to see price]
Ask Quote
Call us
.png)
SIT
- SIT-LOCK® 13 is very close to the standard type SIT-LOCK® 9, but it is manufactured in a longer execution. It is made of two tapered rings and locking nut.
- For the dimension of the product, please download the catalog in the document section
[Please login to see price]
Ask Quote
Call us
Call us
Call us
Call us
Call us
SIT
- Protection muffis series "M" are special neoprene rubber.
- Resistant to acids, oils, grease, dust, and moisture. Filled with grease to ensure constant lubrication.
- Here are the dimension of product :
- Outside diameter : 100 mm
- Inner diameter : 56 mm
- Length : 122 mm
[Please login to see price]
Ask Quote
Call us
Call us
Call us
Call us
Call us
Call us
Call us
Call us
Call us
Call us
Call us
Call us
