• Type of belt : T10
• Pitch : 10 mm
• Pitch diameter : 138.20 mm
• Outside diameter + flange: -
• Teeth : 44
• Belt width : 50 mm
• Type of pulley : 5
• Material : Aluminium

• Type of belt : 8 M 
• Pitch : 8 mm
• Pitch diameter : 100.49 mm
• Outside diameter + flange : 108 mm 
• Teeth : 40
• Belt width : 85 mm
• Type of pulley : 1
• Material : Steel
• Flange : With flanges 

No description for this product yet.

Sprocket for chain according to DIN 8187 - ISO/R 606

D_e : External Diameter   mm

D_p : Pitch Diameter        mm

D_m : Hub Diameter        mm

W  :  Weight                  kg

• Type of belt : T10
• Pitch : 10 mm
• Pitch diameter : 189.10 mm
• Outside diameter + flange: -
• Teeth : 60
• Belt width : 50 mm
• Type of pulley : 5
• Material : Aluminium

No description for this product yet.

• HTD pulleys have a different design from the traditional toothed pulleys. The axial grooves are designed to allow the beltteeth to catch the pulley teeth with negligible triction. HTD Pulleys are available with full hub and for assembly with SER-SIT taper bushing.
•  
•  
• Product detail : 
• Type of belt : 8 M 
• Pitch :  8 mm
• Pitch diameter : 120.86 mm
• Outside diameter + flange : 129 mm
• Teeth : 48
• Type of bush : 2012
• Belt width : 50 mm
• Type of pulley :2
• Material : Cast iron
• Flange : With flanges 

No description for this product yet.

• HTD pulleys have a different design from the traditional toothed pulleys. The axial grooves are designed to allow the beltteeth to catch the pulley teeth with negligible triction. HTD Pulleys are available with full hub and for assembly with SER-SIT taper bushing.
•  
•  
• Product detail : 
•  
• Type of belt : 8 M 
• Pitch :  8 mm
• Pitch diameter : 85.21 mm
• Outside diameter + flange : 94 mm
• Teeth : 34
• Type of bush : 1615 
• Belt width : 85 mm
• Type of pulley :2
• Material : Cast iron
• Flange : With flanges 

• Type of belt : L
• Pitch : 9525 mm
• Pitch diameter : 62.91 mm
• Outside diameter + flange: 67 mm 
• Teeth : 21
• Belt width : 0.75 inch
• Type of pulley : 1
• Material : Steel
• Flange : With flanges

Sprocket for chain according to DIN 8187 - ISO/R 606

D_e : External Diameter   mm

D_p : Pitch Diameter        mm

D_m : Hub Diameter        mm

W  :  Weight                  kg

No description for this product yet.

Sprocket for chain according to DIN 8187 - ISO/R 606

D_e : External Diameter   mm

D_p : Pitch Diameter        mm

D_m : Hub Diameter        mm

W  :  Weight                  kg

• Type of belt : AT10
• Pitch : 10 mm
• Pitch diameter : 112.75 mm
• Outside diameter + flange: 118 mm
• Teeth : 36
• Belt width : 32 mm
• Type of pulley : 2
• Material : Aluminium

• SIT TAPER LOCK BUSHING is designed to give the following:
• 1. Perfect assembly
• 2. rapid dismantling of the pulley and other transmission equipment
• 3. No special tools requirement except hexagonal key
•  
• The large range of finished bores available ensures that an immediate assembly can be made thus avoiding costly factory down-time.
•  
•  
• Here are the dimensions of Taper Bushing with type 1615 (40.40)
• - Bore : we provide taper bushing with minimal bore 12 mm and 1/2 inches; for the max bore you can look at the number writen after "BC" in every product name. 
• for example, BC4040F12 (1615X12MM), so the max bore is 40 mm.
• - Width : the numbers writen in every product name before "F" is width size.
• for example, BC4040F12 (1615X12MM), so the width is 40 mm.
• - Bore size : look at the last number in every product name. 
• for example, BC4040F12, so the bore size is 12.

No description for this product yet.

• Taper Bush : 2012
• Shaft Diameter Range : 18 - 65 mm
• Pitch Diameter : 224 mm
• Outside Diameter : 231 mm
• Groove : 1

• POWERLOCK locking assembly unit consists of four pieces with two inside double-one rings joined through a set of tightening screws. It is recomended for medium torques. Although it is not self centering, it can be easily assembled and diassembled.
•  
•  
• Inner Diameter : 45 mm
• Outside Diameter : 75 mm
• High : 24 mm
• Screws : 12
• Type of Screws : M8

• Of this series both single and double joints are available.Types E are with sliding bushes while type H has needle roller bearings. 
•  
• Joints with plain bearings are available in 2 versions :
• - Types E to DIN 808;
• - Type EB to DIN 808/7551
•  
• Precision joint series "E" (DIN 808) wear resistant sliding bushes from cemented and hardened steel. Strong, precise, and versatile; wide application field.
•  
• Here are the dimension of product : 
• Outside diameter : 45 mm
• Inner diameter : 22 mm
• Length of half joint : 47.5 mm
• Full length : 95 mm 

• Taper Bush : 3535
• Shaft Diameter Range : 40 - 90 mm
• Pitch Diameter : 224 mm
• Outside Diameter : 231 mm
• Groove : 6

• Type of belt : 14 M 
• Pitch : 14 mm
• Pitch diameter : 126.57 mm
• Outside diameter + flange : 134 mm 
• Teeth : 29
• Belt width : 55 mm
• Type of pulley : 1
• Material : Cast iron
• Flange : With flanges 

• SIT TAPER LOCK BUSHING is designed to give the following:
• 1. Perfect assembly
• 2. rapid dismantling of the pulley and other transmission equipment
• 3. No special tools requirement except hexagonal key
•  
• The large range of finished bores available ensures that an immediate assembly can be made thus avoiding costly factory down-time.
•  
•  
• Here are the dimensions of Taper Bushing with type 2012 (50.30)
• - Bore : we provide taper bushing with minimal bore 14 mm and 5/8 inches; for the max bore you can look at the number writen after "BC" in every product name. 
• for example, BC5030F14 (2012X14MM), so the max bore is 50 mm.
• - Width : the numbers writen in every product name before "F" is width size.
• for example, BC5030F14 (2012X14MM), so the width is 30 mm.
• - Bore size : look at the last number in every product name. 
• for example, BC5030F14, so the bore size is 14.

• Type of belt : 14 M 
• Pitch : 14 mm
• Pitch diameter : 193.28 mm
• Outside diameter + flange : 209 mm 
• Teeth : 44
• Belt width : 55 mm
• Type of pulley : 2
• Material : Cast iron
• Flange : With flanges