All Products 19947
Call us
[Please login to see price]
Call us
[Please login to see price]
Call us
[Please login to see price]
Call us
SIT
- Type of belt : S 14 M
- Pitch : 14 mm
- Pitch diameter : 246.76 mm
- Outside diameter + flange : 261 mm
- Teeth : 56
- Belt width : refer to the last number in every product name. (example : ST56-S14M115, so the belt width is 115mm)
- Type of pulley : 8
- Material : Cast iron
- Flange : With flanges
[Please login to see price]
Ask Quote
Call us
SIT
- SIT-LOCK® locking assembly unit consists of four pieces with two inside double-one rings joined through a set of tightening screws. It is recomended for medium torques. Although it is not self centering, it can be easily assembled and diassembled.
- Here are the dimensions of product :
- Inner Diameter : refer to numbers writen after "F" in every product name. For example, CAL1F20/47; so, the inner diameter is 20 mm.
- Outside Diameter : refer to the last number in every product name. For example, CAL1F20/47; so, the outside diameter is 47 mm.
- High : 78 mm
- Screws : 36
- Type of Screws : M20
[Please login to see price]
Ask Quote
Call us
SIT
- SIT-LOCK 14 are shrink discs for external, series "14", are characterised by a single tapered ring instead of opposite tapers of the 3 pieces shrink discs SIT-LOCK series "11". The SIT-LOCK 14 Shrink discs offer a better concentricity and centering and very good balancing. These features make the series highly suitable for mid-high speed applications.
- SIT-LOCK 14 are manufactured in five different types :
- - 14-21 for mid torque transmission
- - 14-22 for high torque transmission
- - 14-81 for very high torque transmission
- - 14-23 eqivalent in size to the type 14-22 but able to transmit an extra 20-30% of torque
- - 14-83 eqivalent in size to the type 14-81 but able to transmit an extra 20-30% of torque
[Please login to see price]
Ask Quote
Call us
Call us
Call us
Call us
Call us
Call us
Call us
Call us
SIT
- TOP DRIVE HTD DUAL synchronous belts can be used in a wide range of apllications where one or multiple pulleys are driven by one belt.
- Inside and outside teeth are identical and are located directly in correspondence o each other. they can be used with standard HTD timing pulleys.
- How to measure the size of a product :
- For example, C2HD960-8M50
- - 960 = pitch length (mm)
- - 8M = pitch
- - 50 = belt width (mm)
[Please login to see price]
Ask Quote
Call us
Call us
Call us
Call us
Call us
Call us
Call us
Call us
Call us
